Revision › Chemical cells and fuel cells › Worksheet

Chemical cells and fuel cells Medium

GCSE Chemistry · Energy Changes · Name ____________________ Date ________

Builds on: Exothermic and endothermic reactions

Do now

Quick questions on earlier topics - to get your brain going.

  1. A student records that a solution is at 21.2 °C before adding 0.10 g of Zn to it. After the reaction, the temperature rises to 23.4 °C. What is the change in temperature? [1]

  2. During a neutralisation reaction in a beaker, the temperature of 250 cm³ of water rises from 18.5 °C to 21.3 °C. What is the rise in temperature, rounded to one decimal place? [1]

Practice

  1. A simple galvanic cell uses a zinc electrode and a copper electrode in an aqueous solution. The standard reduction potential of \(Zn^{2+}/Zn\) is \(-0.76\,\text{V}\) and that of \(Cu^{2+}/Cu\) is \(+0.34\,\text{V}\). Calculate the voltage produced by this cell to two decimal places. [1]

  2. The emf of a galvanic cell made from zinc and copper electrodes is \(1.10\,\text{V}\). If the cell operates at an average current of \(0.75\,\text{A}\), how much electric charge will flow in one hour? (Give your answer to the nearest whole number.) [1]

  3. A 1.5‑V battery supplies a constant current of \(2.0\,\text{A}\) for \(3.5\) h. How many coulombs of electric charge pass through the circuit? Give your answer to the nearest whole number. [answer: 25200 C] [1]

  4. A galvanic cell has an electromotive force of \(1.20\text{ V}\) and an internal resistance of \(0.4\,\Omega\). It is connected to a load resistor of \(2\,\Omega\). Calculate the power delivered to the external resistor, in watts, rounded to two decimal places. [answer: 0.50 W] [1]

  5. A simple galvanic cell is constructed by immersing an iron electrode in a 1.0 M H₂SO₄ solution and an aluminium electrode in the same solution. The standard reduction potentials are \(E^\circ(\mathrm{Fe^{2+}/Fe}) = -0.44\,\text{V}\) and \(E^\circ(\mathrm{Al^{3+}/Al}) = -1.66\,\text{V}\). Assuming that aluminium is the anode (oxidised) and iron is the cathode, calculate the cell voltage to two decimal places. [answer: 1.22 V] [1]

  6. Which statement best compares rechargeable batteries with non‑rechargeable cells? (Tick one box) [1]

    1. Non‑rechargeable cells give more power output than rechargeable cells.
    2. Rechargeable batteries can be charged again by applying an external current, but non‑rechargeable cells cannot.
    3. Rechargeable batteries have higher voltage than non‑rechargeable cells.
    4. Both types of cells produce the same amount of water in a fuel cell.
  7. Connecting cells in which manner increases the overall voltage of a battery? [1]

  8. Which statement correctly defines a fuel cell? (Tick one box) [1]

    1. It uses batteries to power circuits.
    2. It converts chemical energy directly into electrical energy by electrochemical reaction.
    3. It stores chemical energy as electrical charge.
    4. It generates heat from chemical reactions.
  9. In a simple galvanic cell, the metal that donates electrons to the external circuit is known as the _______. [1]

  10. In a galvanic cell, which electrode attracts positively charged ions from the electrolyte? [1]

    1. Negative electrode
    2. Positive electrode
    3. Cathode
    4. Anode
  11. In a simple chemical cell where an iron electrode and a silver electrode are immersed in a sodium hydroxide solution, which metal will act as the anode and lose electrons? [1]

    1. Neither metal
    2. Silver
    3. Both metals
    4. Iron

Stretch

A step up - try these if you finish.

  1. A hydrogen fuel cell delivers 0.8 V per cell and each cell uses hydrogen at a rate of 1% per hour. To obtain a total voltage of 12 V for a device, how many such cells must be connected in series? [2]

  2. A hydrogen fuel cell operates at a current of 0.75 A and produces a voltage of 1.2 V per cell. How many such cells would be needed to power an appliance that requires 90 W? Give your answer as a whole number. [3]

  3. A simple cell is made using a zinc electrode (E° = –0.76 V) and a copper electrode (E° = +0.34 V) in 1 mol/dm³ ZnCl₂ solution. What is the emf of this cell? Answer: ___ V [2]

  4. A city uses a hydrogen fuel cell system to generate electricity. Each 10 kWh of electricity produced requires 0.6 kg of hydrogen gas. If the city needs 800,000 kWh per year, how many kilograms of hydrogen are required annually? Answer: ___ kg [2]

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which of the following best explains why increasing temperature increases the rate of a chemical reaction? [1]

    1. ☐ It increases the number of collisions but not their energy
    2. ☐ It decreases the activation energy of the reactants
    3. ☐ It reduces the concentration of the reactant
    4. ☐ It increases both the frequency of collisions and their average kinetic energy
    (Rates of reaction)
  2. In the reaction \(2\mathrm{NO(g)} + \mathrm{O_2(g)} \rightleftharpoons 2\mathrm{NO_2(g)}\), at equilibrium the partial pressure of NO is 0.30 atm and that of NO₂ is 0.45 atm. If \(K_p\) for this reaction is 3.0, what is the equilibrium partial pressure of O₂? (Give your answer in atm to two decimal places.) [1]

    (Reversible reactions and equilibrium)
  3. During an experiment where the rate of a reaction is measured by collecting gas, which of the following is essential for safe completion? [1]

    1. ☐ Ignoring temperature changes during the experiment
    2. ☐ Performing the experiment in a dry lab without ventilation
    3. ☐ Wearing goggles and using a clamp to secure the gas syringe
    4. ☐ Using a larger volume flask to increase safety margin
    (Rates of reaction)
  4. In the reaction \(\mathrm{C_2H_4(g)} + \mathrm{H_2(g)} \rightleftharpoons \mathrm{C_2H_6(g)}\), a sample was initially prepared in a 1‑L container with 0.50 mol of ethene and 0.30 mol of hydrogen. After reaching equilibrium, 0.10 mol of each reactant had been converted to product. What is the value of \(K_c\) for this reaction at that temperature? (Give your answer rounded to two significant figures.) [1]

    (Reversible reactions and equilibrium)
  5. Which statement best describes the effect on the surroundings in an endothermic versus an exothermic reaction? [1]

    1. Both reactions decrease the temperature of the surroundings.
    2. Both reactions have no effect on the temperature of the surroundings.
    3. Both reactions increase the temperature of the surroundings.
    4. Endothermic decreases, exothermic increases the temperature of the surroundings.
    (Exothermic and endothermic reactions)
  6. A common misconception is that an exothermic reaction always makes the surrounding environment feel hot. Which statement best corrects this misconception? [1]

    1. Temperature change cannot be measured.
    2. The surroundings stay at the same temperature because energy is used within the system.
    3. The temperature of the surroundings will definitely rise.
    4. The temperature may rise or fall depending on the heat capacity of the surroundings.
    (Exothermic and endothermic reactions)

💼 Where it leads: Smart meter installer · Electricity distribution worker · Electrician · Auto electrician - more

Stuck, or finished? Scan for help on chemical cells and fuel cells - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. 2.2
  2. 2.8
  3. 1.1
  4. 2700
  5. 25200
  6. 0.5
  7. 1.22
  8. B Rechargeable batteries can be charged again by applying an external current, but non‑rechargeable cells cannot.
  9. series
  10. B It converts chemical energy directly into electrical energy by electrochemical reaction.
  11. anode
  12. C Cathode
  13. D Iron
  14. 15
    Series voltage addition
  15. 100
    Power supplied by one cell = V × I = 1.2 V × 0.75 A = 0.9 W. Number of cells = required power ÷ power per cell = 90 W ÷ 0.9 W ≈ 100.
  16. 1.1
    Ecell=E°cathode−E°anode
  17. 48000
    Linear scaling
  18. D ☐ It increases both the frequency of collisions and their average kinetic energy
  19. 0.75
  20. C ☐ Wearing goggles and using a clamp to secure the gas syringe
  21. 1.3
  22. D Endothermic decreases, exothermic increases the temperature of the surroundings.
  23. D The temperature may rise or fall depending on the heat capacity of the surroundings.

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on chemical cells and fuel cells - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk