Electrolysis is the movement of ions in a liquid or melt when an electric current is applied. In GCSE science you must know what drives this process, how products are predicted and why electrolytic metal extraction works.
Key words
electrolyte
a molten ionic compound or aqueous solution that conducts electricity because its ions can move freely.
cathode
the negative electrode; cations travel here and gain electrons (reduction).
anode
the positive electrode; anions travel here and lose electrons (oxidation).
Key points
Ionic compounds melt or dissolve to give free ions that can carry charge.
An electric current pushes cations to the cathode where they accept electrons.
The same current drives anions toward the anode where they donate electrons.
At the cathode reduction occurs – metal ions become neutral atoms or hydrogen gas forms if the ion is less reactive than H⁺.
At the anode oxidation occurs – non‑metal ions form elemental halogens, or water gives oxygen if no halides are present.
In molten binary compounds with inert electrodes the metal comes out at the cathode and the non‑metal (or halogen) evolves at the anode.
Watch out for
None
Remember: Focus on ion movement as the key to electrolytic conduction; that is why molten substances can be electrolysed.
Electrolysis Stretch
Quick revision for GCSE – focus on the hard points that can give you extra marks.
Key points
An electrolyte is any molten ionic compound or aqueous solution that lets ions move freely, giving it conductivity.
When a current runs through an electrolyte, cations (positive) drift to the cathode (negative electrode); anions (negative) go to the anode (positive electrode).
At the cathode electrons are supplied; ions undergo reduction (gain e⁻). At the anode they lose electrons – oxidation.
With molten salts and inert electrodes the metal ion is reduced to metal at the cathode, while the non‑metal ion gives its elemental form or halogen at the anode (e.g. Pb²⁺ → Pb⁰, Br⁻ → ½Br₂).
In aluminium smelting a mixture of Al₂O₃ and cryolite (Na₃AlF₆) lowers the melting point; carbon anodes are consumed by oxidation to CO₂/CO, so they must be continually replaced.
Aqueous solutions with inert electrodes involve water: at the cathode H⁺ + e⁻ → ½H₂ unless a metal ion is more reactive and displaces hydrogen; at the anode either O₂ from OH⁻ or a halogen if halide ions are present.
Watch out for
Don’t confuse conductivity with the presence of free electrons; remember that electrolysis relies on ion migration.
For molten salts predict products by looking at metal versus non‑metal: metal deposits at cathode, halogen or element forms at anode.
In aqueous solutions always compare the reactivity of any metal ion with hydrogen to decide whether metal will be deposited or H₂ evolved.
Remember: Ions move in electrolytes – that’s why molten salts can be electrolysed.
✏️ Try 3 quick questions
5. Tick one box about a required practical or safety measure: During laboratory electrolysis of molten NaCl, which precaution is essential?
3. During the electrolysis of an aqueous solution of MgSO₄ with inert electrodes, which gas evolves at the cathode? (Tick one box)
Which of the following best defines an electrolyte?
There are more on this in 4 Triangles, with hints and worked answers, and real past-paper questions. Carry on there.
Practise it with real exam questions
4 Triangles has quick questions on electrolysis, real GCSE past-paper questions with their mark schemes, and a revision plan that picks what to work on next.
Questions on this topic for a lesson, homework or revision - a quick "do now", misconception questions, small steps that change one thing at a time, and practice, with answers on the last page.