Revision › Exothermic and endothermic reactions › Worksheet

Exothermic and endothermic reactions Medium

GCSE Chemistry · Energy Changes · Name ____________________ Date ________

Practice

  1. Which statement best describes the effect on the surroundings in an endothermic versus an exothermic reaction? [1]

    1. Both reactions decrease the temperature of the surroundings.
    2. Both reactions have no effect on the temperature of the surroundings.
    3. Both reactions increase the temperature of the surroundings.
    4. Endothermic decreases, exothermic increases the temperature of the surroundings.
  2. A common misconception is that an exothermic reaction always makes the surrounding environment feel hot. Which statement best corrects this misconception? [1]

    1. Temperature change cannot be measured.
    2. The surroundings stay at the same temperature because energy is used within the system.
    3. The temperature of the surroundings will definitely rise.
    4. The temperature may rise or fall depending on the heat capacity of the surroundings.
  3. Which of the following is an essential safety precaution when performing a neutralisation reaction that produces heat? [1]

    1. Record temperature before mixing but not after.
    2. Use a large beaker to reduce surface area.
    3. Conduct the experiment under a fume hood.
    4. Wear gloves and eye protection.
  4. An exothermic reaction releases 120 kJ of heat into a 500 g sample of water that is initially at 20 °C. What is the final temperature of the water to the nearest whole degree? [1]

  5. A student dissolves 0.5 g of ammonium chloride in 100 mL of water at 25 °C. After dissolution, the temperature is 20 °C. What is the magnitude of the temperature change? [1]

  6. Which of the following statements correctly describes an exothermic reaction? [1]

    1. Energy is released to the surroundings; temperature increases.
    2. Energy is absorbed from the surroundings; temperature decreases.
    3. Energy transfer depends only on the mass of the reactants.
    4. Energy is unchanged; no effect on temperature.
  7. A student records that a solution is at 21.2 °C before adding 0.10 g of Zn to it. After the reaction, the temperature rises to 23.4 °C. What is the change in temperature? [1]

  8. During a neutralisation reaction in a beaker, the temperature of 250 cm³ of water rises from 18.5 °C to 21.3 °C. What is the rise in temperature, rounded to one decimal place? [1]

  9. What is the minimum energy required for particles to react? [1]

  10. Which definition best describes an endothermic reaction? [1]

    1. A reaction that occurs only at high temperatures
    2. A reaction that absorbs energy from surroundings
    3. A reaction that produces light
    4. A reaction that releases energy to surroundings
  11. A 250 cm³ beaker of water is heated from 18.0 °C to 21.5 °C during a neutralisation reaction. What was the rise in temperature? (Give your answer to one decimal place.) [1]

Stretch

A step up - try these if you finish.

  1. Which statement correctly explains why an endothermic reaction causes the surrounding temperature to fall? [1]

    1. The reaction releases light
    2. Energy is taken from the surroundings
    3. Energy is transferred to the surroundings
    4. The reaction mixture cools but the surroundings warm
  2. A neutralisation reaction of 0.3 mol H₂SO₄ with excess NaOH releases 9.6 kJ of heat. Calculate the heat released per gram of H₂SO₄ (molar mass = 98 g mol⁻¹). Give your answer to the nearest J g⁻¹. [2]

  3. Which precaution should be taken when handling dilute acids in this experiment? [1]

    1. keep acid in an open container
    2. avoid eye protection
    3. use a metal spoon
    4. wear gloves
  4. If a 1 M NaOH solution has a volume of 200 mL, how many grams of NaOH are present? (Molar mass = 40 g mol⁻¹). Give your answer to the nearest gram. [2]

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. A simple galvanic cell uses a zinc electrode and a copper electrode in an aqueous solution. The standard reduction potential of \(Zn^{2+}/Zn\) is \(-0.76\,\text{V}\) and that of \(Cu^{2+}/Cu\) is \(+0.34\,\text{V}\). Calculate the voltage produced by this cell to two decimal places. [1]

    (Chemical cells and fuel cells)
  2. The emf of a galvanic cell made from zinc and copper electrodes is \(1.10\,\text{V}\). If the cell operates at an average current of \(0.75\,\text{A}\), how much electric charge will flow in one hour? (Give your answer to the nearest whole number.) [1]

    (Chemical cells and fuel cells)
  3. Which of the following best explains why increasing temperature increases the rate of a chemical reaction? [1]

    1. ☐ It increases the number of collisions but not their energy
    2. ☐ It decreases the activation energy of the reactants
    3. ☐ It reduces the concentration of the reactant
    4. ☐ It increases both the frequency of collisions and their average kinetic energy
    (Rates of reaction)
  4. In the reaction \(2\mathrm{NO(g)} + \mathrm{O_2(g)} \rightleftharpoons 2\mathrm{NO_2(g)}\), at equilibrium the partial pressure of NO is 0.30 atm and that of NO₂ is 0.45 atm. If \(K_p\) for this reaction is 3.0, what is the equilibrium partial pressure of O₂? (Give your answer in atm to two decimal places.) [1]

    (Reversible reactions and equilibrium)
  5. During an experiment where the rate of a reaction is measured by collecting gas, which of the following is essential for safe completion? [1]

    1. ☐ Ignoring temperature changes during the experiment
    2. ☐ Performing the experiment in a dry lab without ventilation
    3. ☐ Wearing goggles and using a clamp to secure the gas syringe
    4. ☐ Using a larger volume flask to increase safety margin
    (Rates of reaction)
  6. In the reaction \(\mathrm{C_2H_4(g)} + \mathrm{H_2(g)} \rightleftharpoons \mathrm{C_2H_6(g)}\), a sample was initially prepared in a 1‑L container with 0.50 mol of ethene and 0.30 mol of hydrogen. After reaching equilibrium, 0.10 mol of each reactant had been converted to product. What is the value of \(K_c\) for this reaction at that temperature? (Give your answer rounded to two significant figures.) [1]

    (Reversible reactions and equilibrium)

💼 Where it leads: Chemical plant process operator · Food factory worker · Chemical engineering technician · Laboratory technician - more

Stuck, or finished? Scan for help on exothermic and endothermic reactions - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. D Endothermic decreases, exothermic increases the temperature of the surroundings.
  2. D The temperature may rise or fall depending on the heat capacity of the surroundings.
  3. D Wear gloves and eye protection.
  4. 77
  5. 5
  6. A Energy is released to the surroundings; temperature increases.
  7. 2.2
  8. 2.8
  9. activation energy
  10. B A reaction that absorbs energy from surroundings
  11. 3.5
    Final temperature – initial temperature
  12. B Energy is taken from the surroundings
    Answer to question 2: tick box option B. 'Energy is taken from the surroundings'
  13. 327 J g⁻¹
  14. D wear gloves
  15. 8
  16. 1.1
  17. 2700
  18. D ☐ It increases both the frequency of collisions and their average kinetic energy
  19. 0.75
  20. C ☐ Wearing goggles and using a clamp to secure the gas syringe
  21. 1.3

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on exothermic and endothermic reactions - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk