Revision › Moles and masses › Worksheet
Moles and masses Medium
GCSE Chemistry · Quantitative Chemistry · Name ____________________ Date ________
Builds on: Standard form, Ratio notation and simplifying, Conservation of mass and formula mass
Do now
Quick questions on earlier topics - to get your brain going.
Using the relative formula mass method, calculate the percentage by mass of calcium in calcium oxide (CaO). Relative atomic masses: Ca=40, O=16. Give your answer to one decimal place. [1]
Multipliers written before chemical formulas in a balanced equation are called? [1]
- Reactants
- Coefficients
- Exponents
- Substitutions
Write 0.0489 as a number in standard form. [1]
Convert \(0.00456\) into standard form. [1]
Practice
An unknown substance has a molar mass of 100 g mol⁻¹. A chemist dissolves 2.50 g of it in water and then evaporates the solution, leaving a solid residue that weighs 2.52 g. How many moles of the substance were originally present? Round to two significant figures. [2]
Which of the following statements is incorrect about molar mass? [1]
- The molar mass of NaCl is equal to its relative formula mass, approximately 58.5 g mol⁻¹.
- The molar mass of CO₂ is 44 g mol⁻¹.
- The molar mass can be used directly as the mass of one molecule.
- The molar mass of a compound equals the sum of atomic masses in grams per mole.
Tick one box on the definition of a mole. [1]
- A quantity that contains Avogadro’s constant entities of any type.
- The amount of matter needed to produce 1 mol of electrons in a reaction.
- The number of atoms in one gram of any element.
- The mass of a substance divided by its relative atomic mass.
Tick one box about safety when weighing a solid reactant for a laboratory experiment. [1]
- Use a pre‑tared weigh boat and tare it before adding the solid.
- Place the solid directly on the balance plate without any container, as this reduces error.
- Always use a plastic spoon to transfer the solid onto the balance.
- Weigh the solid at room temperature; no need to control temperature.
Which statement correctly describes a mole? [1]
- One mole of any substance contains 6.02 × 10²³ atoms.
- A mole is defined only for gases.
- The mass of one mole equals the atomic mass in grams for an element.
- One mole of a substance has the same number of entities as one mole of any other substance.
A sample of sodium chloride weighing 58.5 g is dissolved in water. Calculate the number of moles of NaCl present, showing two significant figures. [2]
When converting masses to balance an equation, what intermediate quantity is used? [1]
The concentration of a solution expressed as mass per volume uses which unit? [1]
When measuring the mass of a solid on an electronic balance, what should you do first? A) Place the sample directly on the tray B) Tare the balance before placing the sample C) Weigh in a drafty room D) Use a ruler to estimate size [1]
- A
- C
- D
- B
How many moles are present in 8 g of oxygen gas O₂? (Relative formula mass = 32 g·mol⁻¹) [1]
What is the mass in grams of 3 mol of carbon monoxide CO? (Relative formula mass = 28 g·mol⁻¹) [1]
The reactant that is completely consumed and limits product formation is called what? [1]
Stretch
A step up - try these if you finish.
Which pair of elements have relative formula masses that differ by less than 1 g mol⁻¹? [2]
- N & O.
- Fe & Co
- Na & Mg
- K & Ca
Calculate the number of moles in 25.0 g of calcium carbonate (CaCO₃). Relative formula mass is 100 g mol⁻¹. Give your answer to two decimal places. [2]
A chemist reacts 8 g of nitrogen gas with excess hydrogen gas in the Haber process (N₂ + 3H₂ → 2NH₃). What is the mass of ammonia produced? Give your answer to the nearest gram. [3]
Which of the following statements correctly describes a relationship between moles and mass? [2]
- Avogadro’s constant differs between elements.
- None of the above.
- One mole of water contains 6.02×10²³ molecules.
- The mass of one mole of water is 9 g.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
Which statement correctly compares yield and atom economy? [1]
- B) Atom economy is always greater than yield.
- D) None of the above.
- A) Yield refers to the amount actually obtained; atom economy measures the proportion of atoms that go into the desired product.
- C) Yield is a percentage of the theoretical maximum mass.
0.080 mol of CaCl₂ is dissolved in a solution that has a concentration of 0.040 M. How many cubic centimetres of this solution contain the 0.080 mol? (Answer in cm³) [1]
(Titrations and solution concentration)Write the ratio 18:24 in simplest form. [1]
(Ratio notation and simplifying)During a synthesis, 2.4 g of product was isolated; the theoretical yield calculated for this reaction was 3.1 g. What is the percentage yield to the nearest whole number? [1]
(Yield and atom economy)A chemist prepares a 50.0 ml sample of a solution that contains 0.020 mol of potassium chloride (KCl). If the concentration of the KCl solution is expressed as mol/dm³, what is this concentration? Give your answer to two decimal places. [1]
(Titrations and solution concentration)How many grams of nitrogen gas are required for complete reaction with 12.0 g of hydrogen gas (H₂) to form ammonia? Use the equation \(\mathrm{N_2 + 3 H_2 \rightarrow 2 NH_3}\). Relative atomic masses: N = 14.0, H = 1.0. [1]
(Conservation of mass and formula mass)
Still going? Unlimited questions on moles and masses, marked as you go: 4triangles.co.uk
💼 Where it leads: Quality control assistant · Pharmacy technician · Laboratory technician · Chemist - more
Stuck, or finished? Scan for help on moles and masses - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- 71.4
- B Coefficients
- 4.89×10^-2
- 4.56×10^-3
- 0.025
moles = mass ÷ molar mass = 2.50 g ÷ 100 g mol⁻¹ = 0.025 mol → 0.025 (two sf). - C The molar mass can be used directly as the mass of one molecule.
Molar mass refers to grams per mole; it is not the mass of a single molecule. Thus D is incorrect. - A A quantity that contains Avogadro’s constant entities of any type.
A mole is defined as the amount of substance that contains Avogadro's number of entities, regardless of type. - A Use a pre‑tared weigh boat and tare it before adding the solid.
The correct safety procedure is to use a pre‑tared weigh boat and tare the balance. - D One mole of a substance has the same number of entities as one mole of any other substance.
A and C are correct statements about moles. Only one option can be chosen, the most accurate is C. - 1
Use moles = mass ÷ relative formula mass. Relative formula mass of NaCl ≈ 23+35.45=58.45 g mol⁻¹. 58.5 g ÷ 58.45 g mol⁻¹ = 1.001 mol → 1.0 mol to two significant figures. - moles
- g/dm³
- D B
- 0.25
- 84
- limiting reactant
- D K & Ca
K (39.10) and Ca (40.08) differ by 0.98 g mol⁻¹, the only pair satisfying the criterion. - 0.25
- 10
Moles N₂ = 8 ÷ 28 = 0.2857 mol. This gives 2×0.2857 = 0.5714 mol NH₃. Mass = 0.5714 × 17 ≈ 9.71 g → 10 g. - C One mole of water contains 6.02×10²³ molecules.
Option A is correct – it states that a mole of any substance contains 6.02×10²³ entities, and the mass of a mole equals its relative formula mass. Option B gives an incorrect mass; option C incorrectly says Avogadro’s constant varies. - C A) Yield refers to the amount actually obtained; atom economy measures the proportion of atoms that go into the desired product.
- 2000
- 3:4
- 77
- 0.4
- 56
For every 3 mol of H₂ (6 g) one 1 mol of N₂ (28 g) is required. Therefore the mass ratio N₂:H₂ = 28 g : 6 g = 14/3. Multiplying by the given 12.0 g H₂ gives \(\frac{14}{3}\times12.0=56.0\text{ g} \).
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on moles and masses - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk