Revision › Polymers › Worksheet

Polymers Hard

GCSE Chemistry · Organic Chemistry · Name ____________________ Date ________

Builds on: Alkenes, alcohols, acids and esters, Carbon: diamond, graphite and graphene, Crude oil, hydrocarbons and fuels

Do now

Quick questions on earlier topics - to get your brain going.

  1. Name the first member of the alkene homologous series. [1]

  2. Tick one box about a required safety measure when hydrogen gas is bubbled into ethene in a test tube at low pressure. A) The reaction must be carried out under water cover to avoid flame spread. B) The reaction vessel must be connected to a vacuum line. C) Use a closed system and ensure no open flames are nearby. D) The reaction should be performed in the dark because ethene is photolabile. [1]

    1. B
    2. C
    3. A
    4. D
  3. In a sheet of graphene there are 15 carbon atoms per square centimetre. How many delocalised electrons are present in each square centimetre? [1]

  4. A Buckminsterfullerene molecule (C₆₀) contains 60 carbon atoms. Assuming each atom contributes one delocalised electron, how many electrons are available in total? [1]

Practice

  1. A sample of ethylene glycol weighing 200 g reacts completely with excess oxalic acid to form a polyester. How many millimoles of water are produced? (Molar mass of ethylene glycol = 62 g mol⁻¹). Give your answer to the nearest whole number. [2]

  2. Which type of polymerisation occurs when ethene (CH₂=CH₂) is converted to poly(ethene)? [1]

    1. DNA synthesis
    2. Condensation polymerisation
    3. Protein synthesis
    4. Addition polymerisation
  3. A 3 g sample of poly(ethylene terephthalate) has a density of 1.38 g cm⁻³. What is its volume in cubic centimetres? Round your answer to two decimal places. [2]

  4. When performing a polymerisation that requires heating an alkene under pressure, which of the following safety measures is most important? [2]

    1. Using a fume hood to vent any gases
    2. Maintaining a 10 cm distance between the operator and the reaction vessel
    3. Keeping a fire extinguisher within arm’s reach
    4. Ensuring all metal equipment is non‑reactive to prevent spark generation
  5. A polymerisation reaction uses 150 g of ethylene glycol (HO–CH₂CH₂–OH) with excess terephthalic acid to form PET. For every repeating unit that forms, one molecule of water is released. Given the molar mass of water is 18 g·mol⁻¹ and that of ethylene glycol is 62 g·mol⁻¹, how many grams of water are produced? Give your answer rounded to the nearest gram. [3]

  6. If the degree of polymerisation for a batch of polyethylene glycol (repeat unit mass 44 g mol⁻¹) is 100, what is its average molecular weight? Give your answer in g mol⁻¹. [1]

  7. Monomer X has the functional groups –OH and –COOH. When it reacts with itself by condensation polymerisation, what type of polymer is formed? [1]

    1. ☐ Protein
    2. ☐ DNA
    3. ☐ Addition polymer
    4. ☐ Condensation polymer
  8. A sample of poly(vinyl alcohol) has an average molecular weight of 48 000 g mol⁻¹. The mass of one repeating unit is 44 g mol⁻¹. How many repeating units are there on average in each chain? Provide your answer as a whole number. [1]

  9. An ethene monomer has a molar mass of 28 g mol⁻¹. It is polymerised to give polyethylene that has an average molecular weight of 14 000 g mol⁻¹. How many repeating units are there in each chain on average? Round to the nearest whole number. [1]

  10. 50 mol of ethene (CH₂=CH₂) reacts completely by addition polymerisation to give a polymer whose average molecular weight is 5 000 g mol⁻¹. What is the degree of polymerisation of the polymer, rounded to the nearest whole number? [2]

  11. During the condensation polymerisation of ethylene glycol (HO‑CH₂CH₂‑OH) with hexanedioic acid (HOOC‑(CH₂)₄‑COOH), which small molecule is typically released? [1]

    1. ☐ H₂O
    2. ☐ O₂
    3. ☐ CH₄
    4. ☐ CO₂

Exam practice

Real past-paper questions on polymers, with their mark schemes, are in 4 Triangles - free to practise.

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which definition best describes a carboxylic acid? [1]

    1. B) An alkane with an extra oxygen atom.
    2. D) A compound that contains the functional group –COOH.
    3. A) A compound that has at least two hydroxyl groups.
    4. C) A hydrocarbon with a double bond.
    (Alkenes, alcohols, acids and esters)
  2. A researcher wants to use graphene as a transparent conductor in touchscreens. Which property of graphene makes it suitable for this application? ☐ its high density ☐ its strong covalent bonding giving hardness ☐ its very good electrical conductivity due to delocalised electrons ☐ its large band gap [1]

    1. its very good electrical conductivity due to delocalised electrons
    2. its strong covalent bonding giving hardness
    3. its high density
    4. its large band gap
    (Carbon: diamond, graphite and graphene)
  3. Which precaution is essential when carrying out the acid‑catalysed hydration of an alkene in a laboratory? [2]

    1. The temperature should not exceed 25 °C.
    2. A reflux condenser must be used to prevent loss of solvent vapour.
    3. The reaction vessel must be made of glass only.
    4. All alkali metal salts must be kept away from the mixture.
    (Alkenes, alcohols, acids and esters)
  4. Diamond has a density of 3.51 g cm⁻³ and the molar mass of carbon is 12.01 g mol⁻¹. Calculate the volume (in cubic centimetres) occupied by one mole of diamond atoms. Round to 2 d.p. [1]

    (Carbon: diamond, graphite and graphene)
  5. What is the total number of hydrogen atoms in an alkane containing 7 carbon atoms? (Use the general formula for alkanes: equation=\(C_nH_{2n+2}\) ) [1]

    (Crude oil, hydrocarbons and fuels)
  6. A refinery receives a crude oil feedstock that contains 12 % by mass of butane. If the refinery processes 200 kg of this feedstock, how many kilograms of butane are present? [1]

    (Crude oil, hydrocarbons and fuels)

💼 Where it leads: Chemical plant process operator · Materials technician · Chemical engineering technician · Chemist - more

Stuck, or finished? Scan for help on polymers - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. ethene
  2. B C
  3. 15
  4. 60
  5. 3226
    moles H₂O = 200 g ÷ 62 g mol⁻¹ ≈ 3.226 mol = 3226 mmol
  6. D Addition polymerisation
  7. 2.17
    V = m ÷ d = 3 g ÷ 1.38 g cm⁻³ ≈ 2.17 cm³
  8. D Ensuring all metal equipment is non‑reactive to prevent spark generation
  9. 44
  10. 4400
  11. D ☐ Condensation polymer
  12. 1091
    n = 48000 / 44 ≈ 1090.909 → nearest whole number = 1091.
  13. 500
    Average Molecular Weight = n × Monomer Mass → n=14000/28=500.
  14. 179
  15. A ☐ H₂O
  16. B D) A compound that contains the functional group –COOH.
  17. A its very good electrical conductivity due to delocalised electrons
  18. B A reflux condenser must be used to prevent loss of solvent vapour.
    The hydration reaction is usually performed with a strong acid (e.g. H₂SO₄) and heat; a reflux condenser keeps the system at a constant temperature and prevents escape of volatile products or solvents. Answer must be the option that states this precaution.
  19. 3.42
  20. 16
  21. 24

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on polymers - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk