Revision › Rates of reaction › Worksheet
Rates of reaction Medium
GCSE Chemistry · The Rate & Extent of Chemical Change · Name ____________________ Date ________
Builds on: Exothermic and endothermic reactions, Chemical cells and fuel cells
Do now
Quick questions on earlier topics - to get your brain going.
A student records that a solution is at 21.2 °C before adding 0.10 g of Zn to it. After the reaction, the temperature rises to 23.4 °C. What is the change in temperature? [1]
During a neutralisation reaction in a beaker, the temperature of 250 cm³ of water rises from 18.5 °C to 21.3 °C. What is the rise in temperature, rounded to one decimal place? [1]
Which statement best compares rechargeable batteries with non‑rechargeable cells? (Tick one box) [1]
- Non‑rechargeable cells give more power output than rechargeable cells.
- Rechargeable batteries can be charged again by applying an external current, but non‑rechargeable cells cannot.
- Rechargeable batteries have higher voltage than non‑rechargeable cells.
- Both types of cells produce the same amount of water in a fuel cell.
Connecting cells in which manner increases the overall voltage of a battery? [1]
Practice
Which of the following best explains why increasing temperature increases the rate of a chemical reaction? [1]
- ☐ It increases the number of collisions but not their energy
- ☐ It decreases the activation energy of the reactants
- ☐ It reduces the concentration of the reactant
- ☐ It increases both the frequency of collisions and their average kinetic energy
During an experiment where the rate of a reaction is measured by collecting gas, which of the following is essential for safe completion? [1]
- ☐ Ignoring temperature changes during the experiment
- ☐ Performing the experiment in a dry lab without ventilation
- ☐ Wearing goggles and using a clamp to secure the gas syringe
- ☐ Using a larger volume flask to increase safety margin
In an experiment the volume of CO₂ gas produced was measured as 120 cm³ after 40 s. What is the mean rate of reaction? Give your answer to one decimal place (cm³ s⁻¹). [1]
The mean rate of reaction is measured as 0.05 g min⁻¹. Express this rate in g s⁻¹, giving your answer to three significant figures. [1]
During a decomposition experiment H₂O₂ → H₂O + ½O₂ a student collects 0.1 mol of O₂ in 10 s. What is the mean rate of reaction expressed as mol s⁻¹? Give your answer to two decimal places. [1]
If the concentration of a reacting gas is doubled, what is expected to happen to the rate of reaction? [1]
- ☐ Rate doubles
- ☐ Rate halves
- ☐ Rate remains unchanged
- ☐ Rate increases by a factor of four
A student records that 80 cm³ of CO₂ gas is produced over a period of 40 s. Calculate the mean rate of reaction (cm³/s). [1]
In a catalytic reaction, the catalyst is ________ during the process. [1]
For Higher Tier calculations, the rate of reaction can be expressed in which molar unit? [1]
What is the minimum energy needed for reacting particles to overcome the energy barrier called? [1]
A gas is produced in a reaction; 4 g of hydrogen are formed in 20 s. What is the mean rate of reaction (g/s)? [1]
A student mixes 20 cm³ of a dilute solution of hydrochloric acid with excess calcium carbonate. After 15 s, 60 cm³ of carbon dioxide gas has been collected in a gas syringe. What is the mean rate of reaction expressed as volume of CO₂ formed per second (cm³/s)? [1]
Stretch
A step up - try these if you finish.
Which of the following is a valid unit for expressing the rate of a chemical reaction? [1]
- mol/min
- g/s
- km/h
- J/kg
A reaction produces 0.32 mol of CO₂ in 16 s. What is the mean rate expressed in mol s⁻¹? Give your answer to three decimal places. [1]
A chemical reaction produces 42 g of product in 18 s. What is the mean rate of reaction expressed in g s⁻¹? Give your answer to two decimal places. [1]
Increasing the temperature of a gas reaction has what effect on the rate of reaction? [1]
- It increases the rate because collisions become more energetic.
- It has no effect as long as pressure is constant.
- It decreases the rate because molecules move too fast to collide.
- It changes the product but not the rate.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
A simple galvanic cell uses a zinc electrode and a copper electrode in an aqueous solution. The standard reduction potential of \(Zn^{2+}/Zn\) is \(-0.76\,\text{V}\) and that of \(Cu^{2+}/Cu\) is \(+0.34\,\text{V}\). Calculate the voltage produced by this cell to two decimal places. [1]
(Chemical cells and fuel cells)The emf of a galvanic cell made from zinc and copper electrodes is \(1.10\,\text{V}\). If the cell operates at an average current of \(0.75\,\text{A}\), how much electric charge will flow in one hour? (Give your answer to the nearest whole number.) [1]
(Chemical cells and fuel cells)In the reaction \(2\mathrm{NO(g)} + \mathrm{O_2(g)} \rightleftharpoons 2\mathrm{NO_2(g)}\), at equilibrium the partial pressure of NO is 0.30 atm and that of NO₂ is 0.45 atm. If \(K_p\) for this reaction is 3.0, what is the equilibrium partial pressure of O₂? (Give your answer in atm to two decimal places.) [1]
(Reversible reactions and equilibrium)In the reaction \(\mathrm{C_2H_4(g)} + \mathrm{H_2(g)} \rightleftharpoons \mathrm{C_2H_6(g)}\), a sample was initially prepared in a 1‑L container with 0.50 mol of ethene and 0.30 mol of hydrogen. After reaching equilibrium, 0.10 mol of each reactant had been converted to product. What is the value of \(K_c\) for this reaction at that temperature? (Give your answer rounded to two significant figures.) [1]
(Reversible reactions and equilibrium)A new factory plans to use methane (CH₄) instead of natural gas as the hydrogen source for its Haber process. Which part of the overall production chain will most directly change? ☐ The iron catalyst ☐ The compression pressure stage ☐ The reforming step that generates H₂ ☐ The cooling unit [1]
- The iron catalyst
- The reforming step that generates H₂
- The compression pressure stage
- The cooling unit
When operating a commercial Haber reactor, which of the following safety devices is essential to prevent injury if pressure builds beyond design limits? [1]
- Insulation jacket
- Magnetic stirrer
- Pressure‑relief valve
- Thermocouple
Still going? Unlimited questions on rates of reaction, marked as you go: 4triangles.co.uk
💼 Where it leads: Chemical plant process operator · Food factory worker · Chemical engineering technician · Laboratory technician - more
Stuck, or finished? Scan for help on rates of reaction - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- 2.2
- 2.8
- B Rechargeable batteries can be charged again by applying an external current, but non‑rechargeable cells cannot.
- series
- D ☐ It increases both the frequency of collisions and their average kinetic energy
- C ☐ Wearing goggles and using a clamp to secure the gas syringe
- 3
- 0.000833
- 0.01
- A ☐ Rate doubles
- 2
- not used up
- mol s⁻¹
- activation energy
- 0.2
- 4
- B g/s
Only C matches the form mass per time (or volume per time). - 0.02
Rate = 0.32 ÷ 16 = 0.020 → 0.020 - 2.33
Mean rate = quantity ÷ time = 42 g ÷ 18 s = 2.333… - A It increases the rate because collisions become more energetic.
Higher temperature gives higher kinetic energy → more successful collisions. - 1.1
- 2700
- 0.75
- 1.3
- B The reforming step that generates H₂
- C Pressure‑relief valve
The reactor operates at about 200 atm. A pressure‑relief valve automatically vents excess pressure, protecting equipment and people.
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on rates of reaction - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk