Revision › Structure and properties › Worksheet

Structure and properties Medium

GCSE Chemistry · Bonding, Structure & the Properties of Matter · Name ____________________ Date ________

Builds on: Ionic, covalent and metallic bonding, Atoms, elements, compounds and mixtures, The periodic table

Do now

Quick questions on earlier topics - to get your brain going.

  1. Which of the following best defines metallic bonding? A. Transfer of electrons from a metal atom to a non‑metal atom. B. Sharing of electrons between non‑metal atoms. C. Delocalised electrons shared by a lattice of metal atoms. D. Formation of covalent bonds between metals. [1]

    1. Formation of covalent bonds between metals
    2. Delocalised electrons shared by a lattice of metal atoms
    3. Transfer of electrons from a metal atom to a non‑metal atom
    4. Sharing of electrons between non‑metal atoms
  2. Which statement best describes why ionic compounds have high melting points? [1]

    1. A) They contain strong covalent bonds.
    2. C) They consist of weak van der Waals interactions.
    3. D) Their atoms form a delocalised electron sea.
    4. B) They are held together by electrostatic forces between ions.
  3. A nitrogen atom has a relative atomic mass of 14 and an atomic number of 7. How many neutrons are in one nitrogen atom? [1]

  4. A sodium atom has an atomic number of 11 and a relative atomic mass of 23. How many neutrons are in one sodium atom? [1]

Which is right?

Choose the right answer - then say what mistake each wrong one makes.

  1. When a solid ionic compound is melted, it conducts electricity. Which of the following best explains why it also conducts electricity when dissolved in water?

    1. Electrons become delocalised over all the atoms in the solution, creating metallic‑type conductivity
    2. The small molecules formed by dissolving carry charge via shared electrons, so they conduct
    3. The ions formed during dissolution are now free to move through the liquid, allowing charge to flow
    4. In the solution, the covalent bonds between atoms break, creating a conductive network
  2. Water (H₂O) has a higher boiling point than nitrogen gas (N₂). Which statement best explains why?

    1. H₂O can form strong hydrogen bonds between its molecules, whereas N₂ only has weak London dispersion forces
    2. N₂ contains metallic bonds, so its molecules are held together by delocalised electrons which lower the temperature needed for evaporation
    3. The atoms in N₂ form a giant covalent lattice, so its molecules can escape more easily at lower temperatures
    4. H₂O molecules are held together by ionic bonds, which are much stronger than the van‑der‑Waals forces in N₂

Practice

  1. A sample of 5 mol water is heated and a total of 100 kJ of energy is added. What is the amount of heat absorbed per mole? [1]

  2. Calculate the difference between the melting point of ethanol (−114 °C) and its boiling point (78 °C). What is the temperature difference in °C? [1]

  3. A sample of 0.8 kg of sodium chloride is dissolved in water to make an aqueous solution that has a mass of 1.5 kg total. What is the mass, in grams, of the water present? [1]

  4. An experiment heats 0.05 mol of liquid ammonia (molar mass 17 g mol⁻¹) and requires 16 kJ of energy to raise its temperature from 25 °C to 90 °C. Give your answer to the nearest whole number of J g⁻¹ K⁻¹. [1]

  5. Which of the following statements best explains why polymers have higher melting points than small molecules with similar chemical composition? A. Polymers are made up of charged ions that attract strongly. B. Polymers have weaker covalent bonds between their atoms. C. Polymers contain strong inter‑chain forces that must be overcome to melt them. D. Small molecules have a giant covalent structure that gives them high melting points. [1]

    1. A
    2. D
    3. C
    4. B
  6. Convert a mass of 0.25 kg of aluminium to grams. [1]

  7. When an ionic compound is dissolved, which species allow it to conduct electricity? [1]

  8. Which state symbol indicates a solid in a chemical equation? [1]

  9. Polymers are solids at room temperature mainly because of strong ______ between chains. [1]

  10. Which statement correctly compares ionic and covalent compounds in terms of their typical melting points? Tick one box. [1]

    1. Ionic compounds have lower melting points than covalent compounds because the ions are loosely held together.
    2. Both types of compounds have similar melting points because they both contain chemical bonds.
    3. Covalent compounds usually have higher melting points than ionic compounds because their bonds are stronger.
    4. Ionic compounds generally have higher melting points than covalent compounds due to strong electrostatic forces between ions.
  11. Alloys are harder than pure metals because they disturb the metal’s ______. [1]

Stretch

A step up - try these if you finish.

  1. Which statement best compares metals and alloys with regard to hardness? [1]

    1. Hardness is unrelated to whether a material is an alloy or a pure metal.
    2. Metals are harder than alloys because their atoms can slide easily over one another.
    3. Alloys are harder than pure metals because they have a simpler crystal structure.
    4. Alloys are harder than pure metals because the added element distorts the lattice, preventing easy sliding of layers.
  2. Which symbol is used to indicate a solid in a chemical equation? [1]

    1. (aq)
    2. (g)
    3. (l)
    4. (s)
  3. A new substance has very long covalent chains, but only weak inter‑chain forces. Which property would it most likely have at room temperature? [1]

    1. It will be a gas due to its large size.
    2. It will be a solid because intramolecular bonds are strong.
    3. It will be a liquid because inter‑chain forces are weak.
    4. Its state cannot be predicted from the information given.
  4. When melting a solid metal sample with a Bunsen burner, which safety precaution is most important? [1]

    1. Placing the sample in a water bath before heating.
    2. Using a tongs so the sample does not touch the flame directly.
    3. Removing the flame once the sample starts to melt.
    4. Wearing gloves to protect hands from heat.

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which of these statements about covalent bonding is incorrect? (a) Covalent bonds usually form between two non‑metal atoms (b) Each shared pair of electrons is attracted to the nuclei of both atoms (c) A covalent bond can be represented by a line in a Lewis structure (d) In a covalent bond one atom loses an electron and the other gains it [1]

    1. d
    2. a
    3. b
    4. c
    (Ionic, covalent and metallic bonding)
  2. Which statement about graphite is false? [1]

    1. It can act as a dry lubricant because layers slide easily.
    2. Delocalised electrons give it metallic conductivity within layers.
    3. The layers are bonded by strong covalent forces making it hard.
    4. Each carbon atom forms three covalent bonds in a plane.
    (Carbon: diamond, graphite and graphene)
  3. What is the range of linear dimensions that defines a nanoparticle? Tick one box. ☐ 0–10 nm ☐ 1–100 nm ☐ 10–1000 nm ☐ 100–10000 nm [1]

    1. 1–100 nm
    2. 10–1000 nm
    3. 100–10000 nm
    4. 0–10 nm
    (Nanoparticles)
  4. A new material has carbon atoms arranged in a tetrahedral network similar to diamond but with some vacancies. Which property will it most likely have compared to pure diamond? [1]

    1. Increased thermal expansion.
    2. Lower melting point.
    3. Greater electrical conductivity.
    4. Higher hardness.
    (Carbon: diamond, graphite and graphene)
  5. Which statement about Group 0 elements is true? [1]

    1. They are highly reactive
    2. Their boiling points decrease down the group
    3. They contain more than 20 electrons
    4. They have a full outer shell except helium
    (The periodic table)
  6. If a cube of side length 20 nm has volume V, what is its volume in cubic metres? [1]

    (Nanoparticles)

💼 Where it leads: Welder · Quality control assistant · Materials technician · Laboratory technician - more

Stuck, or finished? Scan for help on structure and properties - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. B Delocalised electrons shared by a lattice of metal atoms
  2. D B) They are held together by electrostatic forces between ions.
  3. 7
  4. 12
  5. C The ions formed during dissolution are now free to move through the liquid, allowing charge to flow
    Electrical conductivity in solutions depends on the *presence and mobility of ions*. Melting creates mobile ions, and dissolving separates the same ions from their lattice, so both states conduct. A: Misconception 6 – Assuming delocalisation occurs in an aqueous solution of ions. B: Misconception 5 – Believing that neutral molecules can conduct by sharing electrons. …
  6. A H₂O can form strong hydrogen bonds between its molecules, whereas N₂ only has weak London dispersion forces
    Compare the strength of the *intermolecular* forces – hydrogen bonding > London dispersion forces. The boiling point depends on how much energy is needed to break these forces, not on the type of covalent bonds inside each molecule. B: Misconception 2 – Thinking small gas molecules have metallic bonding. C: Misconception 3 – Assuming a giant covalent structure exists in a small molecule. …
  7. 20
  8. 192
  9. 700
  10. 290
  11. C C
  12. 250
  13. ions
  14. (s)
  15. intermolecular forces
  16. D Ionic compounds generally have higher melting points than covalent compounds due to strong electrostatic forces between ions.
  17. layers
  18. D Alloys are harder than pure metals because the added element distorts the lattice, preventing easy sliding of layers.
  19. D (s)
  20. B It will be a solid because intramolecular bonds are strong.
  21. B Using a tongs so the sample does not touch the flame directly.
  22. A d
  23. C The layers are bonded by strong covalent forces making it hard.
  24. A 1–100 nm
  25. B Lower melting point.
  26. D They have a full outer shell except helium
  27. 8×10^{-24}
    Side = 20 nm = 20×10⁻⁹ m = 2×10⁻⁸ m. Volume = side³ = (2×10⁻⁸)³ = 8×10⁻²⁴ m³.

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on structure and properties - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk