Revision › Tests for ions and instrumental analysis › Worksheet
Tests for ions and instrumental analysis Hard
GCSE Chemistry · Chemical Analysis · Name ____________________ Date ________
Builds on: Purity, formulations and chromatography, Tests for gases
Do now
Quick questions on earlier topics - to get your brain going.
Which of the following statements is true for a pure substance? [1]
- It has a range of melting points
- It boils at two different temperatures
- Its boiling point is a single, fixed temperature
- Its density changes with pressure
Which of the following is a more reliable method for determining purity of a substance? [1]
- Observing colour of the sample
- Measuring its melting point and checking against literature values
- Counting the number of spots in a chromatogram
- Recording its taste
Which of the following is required before testing a gas for hydrogen? [1]
- ☐ limewater
- ☐ glowing splint
- ☐ burning splint
- ☐ litmus paper
What color change occurs to damp litmus paper when it comes into contact with chlorine gas? [1]
Practice
When 0.1 M NaOH is added to a solution containing Mg²⁺ and Al³⁺, which of the following occurs? [2]
- B) Only Mg(OH)₂ forms a white precipitate; Al(OH)₃ dissolves in excess NaOH
- D) No reaction occurs
- C) Both dissolve forming soluble hydroxides
- A) Both form white precipitates that remain solid
A student mixes 0.05 M AgNO₃ with an aqueous solution that contains both chloride and iodide ions. Which colour precipitate is observed? [2]
- C) Yellow
- A) White
- B) Cream
- D) No precipitate
Which safety precaution should be taken before conducting a flame test on a sample that may contain copper ions? [2]
- D) Keep the work area well ventilated and wear safety goggles
- B) Cover the flame with a cloth to avoid splashing
- C) Place a piece of paper behind the burner to catch debris
- A) Heat the metal rod to 300 °C
A sample weighing 50 g contains 2.0 mmol of chloride ions. What is the mass percentage of chloride in the sample? Give your answer to two decimal places. [2]
Which metal ion produces a lilac flame in a flame test? [2]
- A) Lithium
- B) Potassium
- C) Calcium
- D) Copper
A 5.00 g sample of an unknown salt solution gives 0.300 g BaSO₄ when treated with excess BaCl₂ in dilute HCl. What is the mass percentage of sulfate ions (SO₄²⁻) in the original sample? Give your answer to two decimal places. [3]
When performing the silver nitrate test for halides, why should dilute nitric acid be added to the solution before adding silver nitrate? [1]
- To oxidise chloride ions
- To dissolve any metal hydroxides present
- To reduce Ag⁺ ions to metallic silver
- To keep the solution acidic and prevent Ag₂O precipitation
A 25.0‑mL aqueous solution contains 0.0200 mol of Ca²⁺ ions. How many millilitres (to one decimal place) of a 1.00 M NaOH solution are required to precipitate all the calcium as Ca(OH)₂? [2]
Which statement correctly compares flame tests with instrumental methods for ion detection? [1]
- Flame tests can detect all ions, whereas instrumental methods are limited to metals
- Both methods have the same precision
- Flame tests give quantitative results while instrumental methods only qualitative
- Instrumental methods are more sensitive and rapid than flame tests
A 0.100 M copper(II) sulfate solution is treated with excess sodium hydroxide. Which colour will be observed for the precipitate? [1]
- Green
- Colourless
- Yellow
- Blue
An unknown aqueous solution contains only Fe²⁺ and Cl⁻ ions. If sodium hydroxide is added, which of the following will be observed? [1]
- A brown precipitate forms
- A red precipitate forms
- No precipitate forms
- A green precipitate forms
Which metal ion gives a lilac coloured flame in a flame test? [1]
- Potassium
- Lithium
- Sodium
- Calcium
Exam practice
Real past-paper questions on tests for ions and instrumental analysis, with their mark schemes, are in 4 Triangles - free to practise.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
During chromatography you observe two spots with Rf values 0.45 and 0.78 respectively. Which of the following statements below is a common misunderstanding? Answer: b [1]
- A higher Rf value means the substance has lower affinity for the paper.
- Both spots must belong to the same pure compound.
- The solvent front cannot be used to calculate Rf if it moves unevenly.
- The colour of the spot determines its Rf value.
A small piece of baking soda is placed inside a sealed chamber containing an unknown gas. No fizzing occurs after 5 min. Which gas is most likely present? [1]
- O₂
- H₂
- CH₄
- CO₂
Which test would confirm the presence of chlorine gas? [1]
- Damp litmus paper
- A burning splint
- A glowing splint
- Lime water
A student uses paper chromatography to separate pigments extracted from a leaf. Which of the following best describes what will be observed? Answer: b [1]
- Only one spot because all pigments have identical Rf values.
- Multiple coloured spots, each with distinct Rf values.
- The solvent front will dissolve all pigments into a single cloud.
- Pigments will not travel on the paper as they are too large.
Still going? Unlimited questions on tests for ions and instrumental analysis, marked as you go: 4triangles.co.uk
💼 Where it leads: Quality control assistant · Water treatment worker · Laboratory technician · Forensic scientist - more
Stuck, or finished? Scan for help on tests for ions and instrumental analysis - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- C Its boiling point is a single, fixed temperature
- B Measuring its melting point and checking against literature values
- C ☐ burning splint
- White
- A B) Only Mg(OH)₂ forms a white precipitate; Al(OH)₃ dissolves in excess NaOH
- A C) Yellow
- A D) Keep the work area well ventilated and wear safety goggles
- 0.14
Mass Cl = (2×10⁻³ mol) × 35.45 g·mol⁻¹ = 0.0709 g. %Cl = (0.0709 ÷ 50)×100 = 0.1418 % ≈0.14 %. - B B) Potassium
- 2.47
- D To keep the solution acidic and prevent Ag₂O precipitation
Dilute acid keeps the medium sufficiently acidic so that only halide‑silver precipitates form. - 40
Ca²⁺ + 2 OH⁻ → Ca(OH)₂(s) moles OH⁻ needed = 0.0200×2=0.0400 mol volume NaOH = 0.0400 mol ÷ 1.00 M = 0.0400 L = 40.0 mL - D Instrumental methods are more sensitive and rapid than flame tests
Instrumental techniques (e.g. spectroscopy) are generally faster, more accurate and detect lower concentrations. - D Blue
Cu²⁺ + 2OH⁻ → Cu(OH)₂ (blue). - D A green precipitate forms
Fe²⁺ + 2OH⁻ → Fe(OH)₂ (green). - A Potassium
Flame tests produce characteristic colours: lithium = crimson, sodium = yellow, potassium = lilac, calcium = orange‑red. - B Both spots must belong to the same pure compound.
If two different Rf values are observed, they represent two different compounds – not a single pure one. Answer: b - A O₂
Baking soda reacts with CO₂ to produce fizz; no reaction suggests the gas is not CO₂. - A Damp litmus paper
Chlorine bleaches damp litmus paper, turning it white. - B Multiple coloured spots, each with distinct Rf values.
Different leaf pigments (e.g., chlorophylls, carotenoids) have different affinities for the stationary phase and thus separate into distinct spots. Answer: b
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on tests for ions and instrumental analysis - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk