Revision › Tests for ions and instrumental analysis › Worksheet

Tests for ions and instrumental analysis Hard

GCSE Chemistry · Chemical Analysis · Name ____________________ Date ________

Builds on: Purity, formulations and chromatography, Tests for gases

Do now

Quick questions on earlier topics - to get your brain going.

  1. Which of the following statements is true for a pure substance? [1]

    1. It has a range of melting points
    2. It boils at two different temperatures
    3. Its boiling point is a single, fixed temperature
    4. Its density changes with pressure
  2. Which of the following is a more reliable method for determining purity of a substance? [1]

    1. Observing colour of the sample
    2. Measuring its melting point and checking against literature values
    3. Counting the number of spots in a chromatogram
    4. Recording its taste
  3. Which of the following is required before testing a gas for hydrogen? [1]

    1. ☐ limewater
    2. ☐ glowing splint
    3. ☐ burning splint
    4. ☐ litmus paper
  4. What color change occurs to damp litmus paper when it comes into contact with chlorine gas? [1]

Practice

  1. When 0.1 M NaOH is added to a solution containing Mg²⁺ and Al³⁺, which of the following occurs? [2]

    1. B) Only Mg(OH)₂ forms a white precipitate; Al(OH)₃ dissolves in excess NaOH
    2. D) No reaction occurs
    3. C) Both dissolve forming soluble hydroxides
    4. A) Both form white precipitates that remain solid
  2. A student mixes 0.05 M AgNO₃ with an aqueous solution that contains both chloride and iodide ions. Which colour precipitate is observed? [2]

    1. C) Yellow
    2. A) White
    3. B) Cream
    4. D) No precipitate
  3. Which safety precaution should be taken before conducting a flame test on a sample that may contain copper ions? [2]

    1. D) Keep the work area well ventilated and wear safety goggles
    2. B) Cover the flame with a cloth to avoid splashing
    3. C) Place a piece of paper behind the burner to catch debris
    4. A) Heat the metal rod to 300 °C
  4. A sample weighing 50 g contains 2.0 mmol of chloride ions. What is the mass percentage of chloride in the sample? Give your answer to two decimal places. [2]

  5. Which metal ion produces a lilac flame in a flame test? [2]

    1. A) Lithium
    2. B) Potassium
    3. C) Calcium
    4. D) Copper
  6. A 5.00 g sample of an unknown salt solution gives 0.300 g BaSO₄ when treated with excess BaCl₂ in dilute HCl. What is the mass percentage of sulfate ions (SO₄²⁻) in the original sample? Give your answer to two decimal places. [3]

  7. When performing the silver nitrate test for halides, why should dilute nitric acid be added to the solution before adding silver nitrate? [1]

    1. To oxidise chloride ions
    2. To dissolve any metal hydroxides present
    3. To reduce Ag⁺ ions to metallic silver
    4. To keep the solution acidic and prevent Ag₂O precipitation
  8. A 25.0‑mL aqueous solution contains 0.0200 mol of Ca²⁺ ions. How many millilitres (to one decimal place) of a 1.00 M NaOH solution are required to precipitate all the calcium as Ca(OH)₂? [2]

  9. Which statement correctly compares flame tests with instrumental methods for ion detection? [1]

    1. Flame tests can detect all ions, whereas instrumental methods are limited to metals
    2. Both methods have the same precision
    3. Flame tests give quantitative results while instrumental methods only qualitative
    4. Instrumental methods are more sensitive and rapid than flame tests
  10. A 0.100 M copper(II) sulfate solution is treated with excess sodium hydroxide. Which colour will be observed for the precipitate? [1]

    1. Green
    2. Colourless
    3. Yellow
    4. Blue
  11. An unknown aqueous solution contains only Fe²⁺ and Cl⁻ ions. If sodium hydroxide is added, which of the following will be observed? [1]

    1. A brown precipitate forms
    2. A red precipitate forms
    3. No precipitate forms
    4. A green precipitate forms
  12. Which metal ion gives a lilac coloured flame in a flame test? [1]

    1. Potassium
    2. Lithium
    3. Sodium
    4. Calcium

Exam practice

Real past-paper questions on tests for ions and instrumental analysis, with their mark schemes, are in 4 Triangles - free to practise.

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. During chromatography you observe two spots with Rf values 0.45 and 0.78 respectively. Which of the following statements below is a common misunderstanding? Answer: b [1]

    1. A higher Rf value means the substance has lower affinity for the paper.
    2. Both spots must belong to the same pure compound.
    3. The solvent front cannot be used to calculate Rf if it moves unevenly.
    4. The colour of the spot determines its Rf value.
    (Purity, formulations and chromatography)
  2. A small piece of baking soda is placed inside a sealed chamber containing an unknown gas. No fizzing occurs after 5 min. Which gas is most likely present? [1]

    1. O₂
    2. H₂
    3. CH₄
    4. CO₂
    (Tests for gases)
  3. Which test would confirm the presence of chlorine gas? [1]

    1. Damp litmus paper
    2. A burning splint
    3. A glowing splint
    4. Lime water
    (Tests for gases)
  4. A student uses paper chromatography to separate pigments extracted from a leaf. Which of the following best describes what will be observed? Answer: b [1]

    1. Only one spot because all pigments have identical Rf values.
    2. Multiple coloured spots, each with distinct Rf values.
    3. The solvent front will dissolve all pigments into a single cloud.
    4. Pigments will not travel on the paper as they are too large.
    (Purity, formulations and chromatography)

💼 Where it leads: Quality control assistant · Water treatment worker · Laboratory technician · Forensic scientist - more

Stuck, or finished? Scan for help on tests for ions and instrumental analysis - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. C Its boiling point is a single, fixed temperature
  2. B Measuring its melting point and checking against literature values
  3. C ☐ burning splint
  4. White
  5. A B) Only Mg(OH)₂ forms a white precipitate; Al(OH)₃ dissolves in excess NaOH
  6. A C) Yellow
  7. A D) Keep the work area well ventilated and wear safety goggles
  8. 0.14
    Mass Cl = (2×10⁻³ mol) × 35.45 g·mol⁻¹ = 0.0709 g. %Cl = (0.0709 ÷ 50)×100 = 0.1418 % ≈0.14 %.
  9. B B) Potassium
  10. 2.47
  11. D To keep the solution acidic and prevent Ag₂O precipitation
    Dilute acid keeps the medium sufficiently acidic so that only halide‑silver precipitates form.
  12. 40
    Ca²⁺ + 2 OH⁻ → Ca(OH)₂(s) moles OH⁻ needed = 0.0200×2=0.0400 mol volume NaOH = 0.0400 mol ÷ 1.00 M = 0.0400 L = 40.0 mL
  13. D Instrumental methods are more sensitive and rapid than flame tests
    Instrumental techniques (e.g. spectroscopy) are generally faster, more accurate and detect lower concentrations.
  14. D Blue
    Cu²⁺ + 2OH⁻ → Cu(OH)₂ (blue).
  15. D A green precipitate forms
    Fe²⁺ + 2OH⁻ → Fe(OH)₂ (green).
  16. A Potassium
    Flame tests produce characteristic colours: lithium = crimson, sodium = yellow, potassium = lilac, calcium = orange‑red.
  17. B Both spots must belong to the same pure compound.
    If two different Rf values are observed, they represent two different compounds – not a single pure one. Answer: b
  18. A O₂
    Baking soda reacts with CO₂ to produce fizz; no reaction suggests the gas is not CO₂.
  19. A Damp litmus paper
    Chlorine bleaches damp litmus paper, turning it white.
  20. B Multiple coloured spots, each with distinct Rf values.
    Different leaf pigments (e.g., chlorophylls, carotenoids) have different affinities for the stationary phase and thus separate into distinct spots. Answer: b

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on tests for ions and instrumental analysis - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk