Revision › The Haber process and fertilisers › Worksheet

The Haber process and fertilisers Hard

GCSE Chemistry · Using Resources · Name ____________________ Date ________

Builds on: Reversible reactions and equilibrium, Rates of reaction

Do now

Quick questions on earlier topics - to get your brain going.

  1. Which principle predicts how a system reacts to changes in conditions? [1]

  2. The reverse of an exothermic forward reaction is ______. [1]

  3. A student records that 80 cm³ of CO₂ gas is produced over a period of 40 s. Calculate the mean rate of reaction (cm³/s). [1]

  4. In a catalytic reaction, the catalyst is ________ during the process. [1]

Practice

  1. If the pressure in a Haber reactor is 200 atm, what is this pressure in kPa? [1]

  2. In a laboratory scale synthesis of ammonium chloride from ammonia and hydrochloric acid, which of the following is essential to avoid an excessive exothermic temperature rise? [1]

    1. ☐ Keeping the reaction vessel sealed
    2. ☐ Mixing the reactants rapidly at room temperature
    3. ☐ Using a cold water bath during addition
    4. ☐ Adding HCl slowly into NH₃ solution
  3. In the manufacture of ammonium sulphate (NH₄)₂SO₄ fertilizer, ammonia reacts with sulfuric acid according to 2 NH₃+H₂SO₄→(NH₄)₂SO₄. If 10.0 mol of NH₃ is used in a batch, how many moles of ammonium sulphate are produced? [1]

  4. In a batch reactor, 12.0 mol of nitrogen and 36.0 mol of hydrogen are fed into the Haber process and all the nitrogen is consumed at equilibrium. How many moles of ammonia are present at equilibrium? [1]

  5. If 4.0 mol of nitrogen gas are reacted with an excess of hydrogen in the Haber process, how many moles of ammonia can be produced? [1]

  6. The Haber process is carried out at 450 °C and a pressure of 200 atm. Convert the temperature to Kelvin. [1]

  7. A new factory plans to use methane (CH₄) instead of natural gas as the hydrogen source for its Haber process. Which part of the overall production chain will most directly change? ☐ The iron catalyst ☐ The compression pressure stage ☐ The reforming step that generates H₂ ☐ The cooling unit [1]

    1. The iron catalyst
    2. The reforming step that generates H₂
    3. The compression pressure stage
    4. The cooling unit
  8. When operating a commercial Haber reactor, which of the following safety devices is essential to prevent injury if pressure builds beyond design limits? [1]

    1. Insulation jacket
    2. Magnetic stirrer
    3. Pressure‑relief valve
    4. Thermocouple
  9. Which term best describes the state where a reversible reaction has equal rates of forward and reverse processes? ☐ Chemical equilibrium ☐ Dynamic equilibrium ☐ Thermodynamic equilibrium ☐ Kinetic equilibrium [1]

    1. Kinetic equilibrium
    2. Dynamic equilibrium
    3. Chemical equilibrium
    4. Thermodynamic equilibrium
  10. If the temperature of a Haber reactor is raised while keeping pressure constant, what will happen to the equilibrium concentration of ammonia? ☐ It will increase ☐ It will decrease ☐ It will stay the same ☐ It will oscillate [1]

    1. It will oscillate
    2. It will increase
    3. It will decrease
    4. It will stay the same
  11. Which gas is normally used as the source of hydrogen in the Haber process? ☐ Atmospheric air ☐ Natural gas ☐ Water vapour ☐ Methane [1]

    1. Methane
    2. Water vapour
    3. Natural gas
    4. Atmospheric air
  12. A small-scale fertiliser plant uses 10 kg of phosphoric acid to treat 200 kg of phosphate rock. If each mole of phosphoric acid reacts with one mole of phosphate rock, how many moles of phosphate rock are treated? (Molar mass H₃PO₄ = 98 g·mol⁻¹). Give your answer as a whole number. [1]

Exam practice

Real past-paper questions on the haber process and fertilisers, with their mark schemes, are in 4 Triangles - free to practise.

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which of the following is a valid unit for expressing the rate of a chemical reaction? [1]

    1. mol/min
    2. g/s
    3. km/h
    4. J/kg
    (Rates of reaction)
  2. Which of the following statements correctly compares ceramic and polymer materials regarding heat resistance? [1]

    1. Ceramics can be moulded at room temperature while polymers cannot.
    2. Polymers are more thermally conductive than ceramics.
    3. Ceramics have a higher melting point than polymers.
    4. Both materials exhibit the same thermal expansion.
    (Using materials)
  3. Which statement correctly describes the heat flow in a reversible exothermic reaction? Tick one box. [1]

    1. Heat is absorbed only when the reaction proceeds from products to reactants.
    2. Heat is released in both forward and reverse directions.
    3. Heat is absorbed only when the reaction proceeds from reactants to products.
    4. No heat exchange occurs because energy balances out.
    (Reversible reactions and equilibrium)
  4. A reaction produces 0.32 mol of CO₂ in 16 s. What is the mean rate expressed in mol s⁻¹? Give your answer to three decimal places. [1]

    (Rates of reaction)
  5. A bronze alloy is made of 12 % tin and the rest copper. If a 300 g sample of bronze is required, how many grams of tin are needed? [2]

    (Using materials)
  6. Which statement is true for a reaction that has reached dynamic equilibrium? Tick one box. [1]

    1. The concentration of the products becomes zero.
    2. The reaction stops completely.
    3. The concentrations of all species are increasing.
    4. The forward and reverse rates are equal.
    (Reversible reactions and equilibrium)

💼 Where it leads: Chemical plant process operator · Food factory worker · Chemical engineering technician · Laboratory technician - more

Stuck, or finished? Scan for help on the haber process and fertilisers - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. Le Chatelier’s Principle
  2. Endothermic
  3. 2
  4. not used up
  5. 20265
  6. D ☐ Adding HCl slowly into NH₃ solution
  7. 5
  8. 24
    All N₂ reacts: 12 mol N₂ × (2 mol NH₃ / 1 mol N₂) = 24 mol NH₃.
  9. 8
  10. 723
  11. B The reforming step that generates H₂
  12. C Pressure‑relief valve
    The reactor operates at about 200 atm. A pressure‑relief valve automatically vents excess pressure, protecting equipment and people.
  13. B Dynamic equilibrium
  14. C It will decrease
  15. C Natural gas
  16. 102
    10 kg=10 000 g → 10 000/98≈102.04 mol → about 102 mol of rock
  17. B g/s
    Only C matches the form mass per time (or volume per time).
  18. C Ceramics have a higher melting point than polymers.
  19. A Heat is absorbed only when the reaction proceeds from products to reactants.
  20. 0.02
    Rate = 0.32 ÷ 16 = 0.020 → 0.020
  21. 36 g​
  22. D The forward and reverse rates are equal.

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on the haber process and fertilisers - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk