Comparing lengths, areas and volumes

Knowledge organiser · GCSE Maths · Ratio, proportion and rates of change

Read the full guide · Worksheets: Easy · Medium · Hard ·

When two figures are similar, every linear dimension of one is a fixed multiple (the scale factor) of the corresponding dimension in the other. Lengths vary directly with the scale factor, areas with its square and volumes with its cube.

Key words

Scale factor
Lengths multiply by k.
Area scale factor
Areas multiply by k² when lengths multiply by k.
Volume scale factor
Volumes multiply by k³.
Similar
Same shape, different size - all lengths in the same ratio.

How to do it

  1. Identify two corresponding linear dimensions from each figure and compute the scale factor, \(k=\frac{L_{\text{larger}}}{L_{\text{smaller}}}\).
  2. For lengths simply state that the larger is k times the smaller: \(L_1:L_2 = k:1\).
  3. For areas multiply the scale factor by itself to get the area ratio: \(A_1:A_2 = k^2:1\).
  4. For volumes cube the scale factor for the volume ratio: \(V_1:V_2 = k^3:1\).
  5. If any missing side or height is needed, use the scale factor to multiply the known corresponding side.
  6. Write the comparison in standard GCSE ratio notation, e.g. \(V_B : V_A = 8 : 1\).

Watch out for

  • Do not treat area or volume as linear; they scale with the square or cube of the length ratio.
  • A common slip is to forget the cube when comparing volumes, leading to a too‑small ratio.
  • When multiplying integers such as 19 and 28, double‑check the product. A mis‑calculation (e.g. giving 532 instead of 532) can give an incorrect final ratio.

Remember: Use the scale factor to expand or contract each dimension before calculating area or volume.

Test yourself: scan for quick questions on this topic that mark themselves.
Free at 4triangles.co.uk