Revision › Conservation, dissipation and efficiency › Worksheet

Conservation, dissipation and efficiency Hard

GCSE Physics · Energy · Name ____________________ Date ________

Builds on: Energy stores and calculations, Work done

Do now

Quick questions on earlier topics - to get your brain going.

  1. The energy stored in a stretched spring is called ____. [1]

  2. A car of mass 800 kg is moving at a speed of 20 m s⁻¹. Calculate its kinetic energy to the nearest joule. [1]

  3. Which of the following statements correctly compares work done against friction with work done against gravity? [1]

    1. Work against friction is always negative while work against gravity is always positive
    2. They are the same process and produce identical results
    3. Work against friction is converted into heat, whereas work against gravity changes potential energy
    4. Both result in kinetic energy increase only
  4. An engineer pushes a car with a force of 400 N for a distance of 150 m. How much work does he do? [1]

Practice

  1. Which of the following statements reflects a common misconception about heat produced by friction in engines? [1]

    1. C. Frictional heat contributes to the overall efficiency loss of the engine.
    2. B. The heat can raise the temperature of engine components if not dissipated.
    3. A. Frictional heat is completely wasted energy that cannot be used.
    4. D. The heat generated is transferred into the coolant and radiates from the radiator.
  2. Which of the following best explains why metal rods have higher thermal conductivity than wooden rods? [1]

    1. A. Metals contain mobile electrons that transfer kinetic energy between atoms efficiently.
    2. B. Wood has a higher density which allows faster heat conduction.
    3. C. The crystalline structure of wood gives it high conductivity.
    4. D. Metals are poor conductors of electricity, making them good thermal insulators.
  3. Which of the following best describes what happens to the total energy in a closed system during a change of state? [1]

    1. D. The total energy changes depending on the type of material involved.
    2. B. The total energy increases because heat is added.
    3. C. The total energy decreases because work is done on the system.
    4. A. The total energy remains constant because it is neither created nor destroyed.
  4. Which of the following is a safety precaution that must be taken when heating rods in the thermal conductivity experiment? [1]

    1. A. Ensure the rods are fully submerged in water
    2. C. Use the longest rod available
    3. D. Leave the furnace unattended after starting it
    4. B. Wear protective gloves and goggles
  5. Which of the following best defines "thermal conductivity"? [1]

    1. B. A measure of how much heat is stored in a material.
    2. A. The rate at which heat flows through a material per unit temperature gradient.
    3. D. The ability of a substance to resist electrical currents.
    4. C. The speed at which an object changes temperature.
  6. A domestic electric cooker has a rated power of 2400 W. It takes 8 minutes to heat 1.5 kg of milk from 4 °C to 95 °C. The specific heat capacity of milk is 4200 J·kg⁻¹·K⁻¹. What is the cooker’s efficiency (as a percentage)? Give your answer rounded to one decimal place. [1]

  7. A house has two types of external walls: Wall X is 0.15 m thick and made of brick (thermal conductivity 0.72 W·m⁻¹·K⁻¹); Wall Y is 0.10 m thick and made of insulated foam (thermal conductivity 0.03 W·m⁻¹·K⁻¹). Which wall would result in a slower rate of heat transfer from the inside to outside? [1]

    1. A) Wall X because it has a higher thermal conductivity.
    2. B) Wall X because it is thicker than Wall Y.
    3. D) Wall Y because it is thicker but made of foam.
    4. C) Wall Y because it has a lower thermal conductivity and is thinner.
  8. Choose the statement that reflects a common misunderstanding about the energy efficiency of refrigerators. [1]

    1. D) Increasing the insulation around the fridge improves its energy efficiency.
    2. A) Refrigerators have an efficiency greater than 100 % because they use less electricity than they cool.
    3. C) A high efficiency fridge means it uses very little power to keep food cold.
    4. B) The efficiency of a refrigerator decreases as the outside temperature rises.
  9. Which of the following best defines the term ‘efficiency’ in a physics context? [1]

    1. B) The ratio of useful output energy to total input energy, expressed as a percentage.
    2. C) The difference between input and output energies.
    3. D) The rate at which energy is converted from one form to another.
    4. A) The total amount of useful energy produced.
  10. Which of the following statements best describes energy transfer in a closed system? [1]

    1. B) Energy is converted from one form to another but the total remains unchanged.
    2. C) Energy will gradually disappear as entropy increases.
    3. A) Energy can be created when work is done.
    4. D) The amount of energy can increase if heat enters from outside.
  11. Which statement correctly compares the energy efficiencies of an electric kettle and a gas kettle that both bring 1 L of water to boiling? [1]

    1. C) Both have similar efficiency if they use the same amount of fuel.
    2. D) The electric kettle is generally more efficient due to fewer losses.
    3. A) The electric kettle is more efficient because it has higher power output.
    4. B) The gas kettle is more efficient because combustion generates heat directly.

Exam practice

Real past-paper questions on conservation, dissipation and efficiency, with their mark schemes, are in 4 Triangles - free to practise.

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. A worker pushes a sled with a constant horizontal force of 18 N over a distance of 12 m. What is the work done by the worker on the sled? Give your answer to 2 decimal places, in joules. [1]

    (Work done)
  2. Work and kinetic energy are related how? [1]

    1. Work is the change in kinetic energy, while kinetic energy is the work done by a force.
    2. The magnitude of work equals twice the kinetic energy of a body.
    3. Work is an amount of energy, whereas kinetic energy is a type of work.
    4. Work and kinetic energy are unrelated physical quantities.
    (Work done)
  3. An astronaut on the Moon pulls a spring‑loaded toy car from rest. The car has mass 0.5 kg and the spring constant is 200 N/m. If the spring stretches 0.1 m before release, what will be the speed of the car immediately after it leaves the spring? (to 1 decimal place) [3]

    (Energy stores and calculations)
  4. A 0.3 kg rock falls freely for 4 s before striking the ground on a planet where g=6 m/s². What is its kinetic energy just before impact? (to nearest J) [2]

    (Energy stores and calculations)

💼 Where it leads: Solar panel installer · Insulation engineer · Heat pump engineer · Gas service technician - more

Stuck, or finished? Scan for help on conservation, dissipation and efficiency - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. Elastic potential energy
  2. 160000
  3. C Work against friction is converted into heat, whereas work against gravity changes potential energy
  4. 60000
  5. C A. Frictional heat is completely wasted energy that cannot be used.
  6. A A. Metals contain mobile electrons that transfer kinetic energy between atoms efficiently.
  7. D A. The total energy remains constant because it is neither created nor destroyed.
  8. D B. Wear protective gloves and goggles
    Tick one box.
  9. B A. The rate at which heat flows through a material per unit temperature gradient.
  10. 49.8
  11. D C) Wall Y because it has a lower thermal conductivity and is thinner.
  12. B A) Refrigerators have an efficiency greater than 100 % because they use less electricity than they cool.
  13. A B) The ratio of useful output energy to total input energy, expressed as a percentage.
  14. A B) Energy is converted from one form to another but the total remains unchanged.
  15. B D) The electric kettle is generally more efficient due to fewer losses.
  16. 216
  17. A Work is the change in kinetic energy, while kinetic energy is the work done by a force.
  18. 2
    Ee = ½ke² = ½·200·(0.1)² = 1 J; ½mv² = 1 J ⇒ v = √(2/m) ≈ 2.0 m/s
  19. 86
    v = gt = 6×4 = 24 m/s; Ek = ½mv² = 0.5×0.3×(24)² ≈ 86 J

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on conservation, dissipation and efficiency - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk