Revision › Conservation, dissipation and efficiency › Worksheet
Conservation, dissipation and efficiency Hard
GCSE Physics · Energy · Name ____________________ Date ________
Builds on: Energy stores and calculations, Work done
Do now
Quick questions on earlier topics - to get your brain going.
The energy stored in a stretched spring is called ____. [1]
A car of mass 800 kg is moving at a speed of 20 m s⁻¹. Calculate its kinetic energy to the nearest joule. [1]
Which of the following statements correctly compares work done against friction with work done against gravity? [1]
- Work against friction is always negative while work against gravity is always positive
- They are the same process and produce identical results
- Work against friction is converted into heat, whereas work against gravity changes potential energy
- Both result in kinetic energy increase only
An engineer pushes a car with a force of 400 N for a distance of 150 m. How much work does he do? [1]
Practice
Which of the following statements reflects a common misconception about heat produced by friction in engines? [1]
- C. Frictional heat contributes to the overall efficiency loss of the engine.
- B. The heat can raise the temperature of engine components if not dissipated.
- A. Frictional heat is completely wasted energy that cannot be used.
- D. The heat generated is transferred into the coolant and radiates from the radiator.
Which of the following best explains why metal rods have higher thermal conductivity than wooden rods? [1]
- A. Metals contain mobile electrons that transfer kinetic energy between atoms efficiently.
- B. Wood has a higher density which allows faster heat conduction.
- C. The crystalline structure of wood gives it high conductivity.
- D. Metals are poor conductors of electricity, making them good thermal insulators.
Which of the following best describes what happens to the total energy in a closed system during a change of state? [1]
- D. The total energy changes depending on the type of material involved.
- B. The total energy increases because heat is added.
- C. The total energy decreases because work is done on the system.
- A. The total energy remains constant because it is neither created nor destroyed.
Which of the following is a safety precaution that must be taken when heating rods in the thermal conductivity experiment? [1]
- A. Ensure the rods are fully submerged in water
- C. Use the longest rod available
- D. Leave the furnace unattended after starting it
- B. Wear protective gloves and goggles
Which of the following best defines "thermal conductivity"? [1]
- B. A measure of how much heat is stored in a material.
- A. The rate at which heat flows through a material per unit temperature gradient.
- D. The ability of a substance to resist electrical currents.
- C. The speed at which an object changes temperature.
A domestic electric cooker has a rated power of 2400 W. It takes 8 minutes to heat 1.5 kg of milk from 4 °C to 95 °C. The specific heat capacity of milk is 4200 J·kg⁻¹·K⁻¹. What is the cooker’s efficiency (as a percentage)? Give your answer rounded to one decimal place. [1]
A house has two types of external walls: Wall X is 0.15 m thick and made of brick (thermal conductivity 0.72 W·m⁻¹·K⁻¹); Wall Y is 0.10 m thick and made of insulated foam (thermal conductivity 0.03 W·m⁻¹·K⁻¹). Which wall would result in a slower rate of heat transfer from the inside to outside? [1]
- A) Wall X because it has a higher thermal conductivity.
- B) Wall X because it is thicker than Wall Y.
- D) Wall Y because it is thicker but made of foam.
- C) Wall Y because it has a lower thermal conductivity and is thinner.
Choose the statement that reflects a common misunderstanding about the energy efficiency of refrigerators. [1]
- D) Increasing the insulation around the fridge improves its energy efficiency.
- A) Refrigerators have an efficiency greater than 100 % because they use less electricity than they cool.
- C) A high efficiency fridge means it uses very little power to keep food cold.
- B) The efficiency of a refrigerator decreases as the outside temperature rises.
Which of the following best defines the term ‘efficiency’ in a physics context? [1]
- B) The ratio of useful output energy to total input energy, expressed as a percentage.
- C) The difference between input and output energies.
- D) The rate at which energy is converted from one form to another.
- A) The total amount of useful energy produced.
Which of the following statements best describes energy transfer in a closed system? [1]
- B) Energy is converted from one form to another but the total remains unchanged.
- C) Energy will gradually disappear as entropy increases.
- A) Energy can be created when work is done.
- D) The amount of energy can increase if heat enters from outside.
Which statement correctly compares the energy efficiencies of an electric kettle and a gas kettle that both bring 1 L of water to boiling? [1]
- C) Both have similar efficiency if they use the same amount of fuel.
- D) The electric kettle is generally more efficient due to fewer losses.
- A) The electric kettle is more efficient because it has higher power output.
- B) The gas kettle is more efficient because combustion generates heat directly.
Exam practice
Real past-paper questions on conservation, dissipation and efficiency, with their mark schemes, are in 4 Triangles - free to practise.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
A worker pushes a sled with a constant horizontal force of 18 N over a distance of 12 m. What is the work done by the worker on the sled? Give your answer to 2 decimal places, in joules. [1]
(Work done)Work and kinetic energy are related how? [1]
- Work is the change in kinetic energy, while kinetic energy is the work done by a force.
- The magnitude of work equals twice the kinetic energy of a body.
- Work is an amount of energy, whereas kinetic energy is a type of work.
- Work and kinetic energy are unrelated physical quantities.
An astronaut on the Moon pulls a spring‑loaded toy car from rest. The car has mass 0.5 kg and the spring constant is 200 N/m. If the spring stretches 0.1 m before release, what will be the speed of the car immediately after it leaves the spring? (to 1 decimal place) [3]
(Energy stores and calculations)A 0.3 kg rock falls freely for 4 s before striking the ground on a planet where g=6 m/s². What is its kinetic energy just before impact? (to nearest J) [2]
(Energy stores and calculations)
Still going? Unlimited questions on conservation, dissipation and efficiency, marked as you go: 4triangles.co.uk
💼 Where it leads: Solar panel installer · Insulation engineer · Heat pump engineer · Gas service technician - more
Stuck, or finished? Scan for help on conservation, dissipation and efficiency - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- Elastic potential energy
- 160000
- C Work against friction is converted into heat, whereas work against gravity changes potential energy
- 60000
- C A. Frictional heat is completely wasted energy that cannot be used.
- A A. Metals contain mobile electrons that transfer kinetic energy between atoms efficiently.
- D A. The total energy remains constant because it is neither created nor destroyed.
- D B. Wear protective gloves and goggles
Tick one box. - B A. The rate at which heat flows through a material per unit temperature gradient.
- 49.8
- D C) Wall Y because it has a lower thermal conductivity and is thinner.
- B A) Refrigerators have an efficiency greater than 100 % because they use less electricity than they cool.
- A B) The ratio of useful output energy to total input energy, expressed as a percentage.
- A B) Energy is converted from one form to another but the total remains unchanged.
- B D) The electric kettle is generally more efficient due to fewer losses.
- 216
- A Work is the change in kinetic energy, while kinetic energy is the work done by a force.
- 2
Ee = ½ke² = ½·200·(0.1)² = 1 J; ½mv² = 1 J ⇒ v = √(2/m) ≈ 2.0 m/s - 86
v = gt = 6×4 = 24 m/s; Ek = ½mv² = 0.5×0.3×(24)² ≈ 86 J
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on conservation, dissipation and efficiency - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk