Revision › Energy stores and calculations › Worksheet

Energy stores and calculations Medium

GCSE Physics · Energy · Name ____________________ Date ________

Builds on: Rearranging formulae, Speed, velocity and acceleration

Do now

Quick questions on earlier topics - to get your brain going.

  1. Which statement reflects a common misconception about acceleration? [1]

    1. Acceleration always increases with force.
    2. Acceleration refers to a change in speed only.
    3. Acceleration is a vector quantity.
    4. Acceleration can be positive or negative.
  2. A cyclist rides 50 m east at a constant speed, then turns around and goes 30 m west. What is the overall displacement? [1]

Practice

  1. A 5 kg block is moving at 4 m s⁻¹ when it hits a wall and comes to rest after sliding 2 m while experiencing constant kinetic friction. What was the coefficient of kinetic friction between the block and the floor? (Use g = 9.81 m s⁻²). Give your answer rounded to two decimal places. [1]

  2. A toy catapult uses a spring with constant 250 N m⁻¹ compressed by 0.08 m before launching a 200‑g paper airplane. Calculate the elastic potential energy stored in the spring, to two decimal places (in J). [1]

  3. When conducting a calorimetry experiment to determine the specific heat of aluminium, which of the following should be done? [1]

    1. Stir the water continuously until it reaches the final temperature
    2. Use a large volume of water to reduce errors
    3. Ensure the copper calorimeter is made as thin as possible
    4. Insulate the outer surface of the calorimeter to prevent heat loss
  4. Which of the following energy stores can be increased by heating water? [1]

    1. gravitational potential
    2. chemical
    3. internal (thermal)
    4. elastic potential
  5. A ball of mass 3 kg is thrown vertically upward with an initial speed of 6 m s⁻¹. Calculate the kinetic energy of the ball immediately after launch (to the nearest joule). [1]

  6. Which energy store contains more energy per unit mass for the same material? [1]

    1. elastic potential
    2. kinetic
    3. chemical
    4. gravitational potential
  7. The energy stored in a stretched spring is called ____. [1]

  8. A car of mass 800 kg is moving at a speed of 20 m s⁻¹. Calculate its kinetic energy to the nearest joule. [1]

  9. In the equation **Ek = ½ m v²**, what physical property does the symbol ‘v’ represent? [1]

  10. Tick one box: When determining the specific heat capacity of a substance by heating water in a kettle, which safety precaution is essential? [1]

    1. Adding salt to increase the boiling point
    2. Wearing safety goggles to protect against splashes
    3. Using a high‑current power supply to reduce heating time
    4. Allowing the water to boil until it reaches 100 °C without any covering
  11. The rate at which energy is transferred or work is done in a system is known as ____. [1]

  12. An object moving freely possesses energy that can do work when it slows down. This energy is called ____. [1]

Stretch

A step up - try these if you finish.

  1. An astronaut on the Moon pulls a spring‑loaded toy car from rest. The car has mass 0.5 kg and the spring constant is 200 N/m. If the spring stretches 0.1 m before release, what will be the speed of the car immediately after it leaves the spring? (to 1 decimal place) [3]

  2. A 0.3 kg rock falls freely for 4 s before striking the ground on a planet where g=6 m/s². What is its kinetic energy just before impact? (to nearest J) [2]

  3. A kettle has a power rating of 2000 W and boils 1 kg of water from 20°C to 100°C. Ignoring losses, how long in minutes does it take? (Use c=4180 J/kg°C, round to one decimal place) [3]

  4. During a simple pendulum swing, when the bob passes through its lowest point, which form of mechanical energy is greatest? ☐ Kinetic energy ☐ Gravitational potential energy ☐ Elastic potential energy ☐ Internal (thermal) energy [1]

    1. D
    2. A
    3. C
    4. B

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. The relationship is \(y=\dfrac{x+3}{2-x}\). Rearrange this formula so that \(x\) is expressed in terms of \(y\). [1]

    (Rearranging formulae)
  2. Which of the following statements correctly distinguishes speed from velocity? [1]

    1. C Speed can be expressed in metres per second, while velocity cannot.
    2. A Speed is always positive; velocity includes magnitude and direction.
    3. D Both speed and velocity are vector quantities.
    4. B Velocity has no direction but can be negative.
    (Speed, velocity and acceleration)
  3. The potential energy of an object is given by \(p = m g h\). If the mass is \(m=0.75\,\text{kg}\), gravitational acceleration \(g=9.8\,\text{m/s}^2\), and the potential energy \(p=2.94\,\text{J}\), find the height \(h\). [1]

    (Rearranging formulae)
  4. A domestic electric cooker has a rated power of 2400 W. It takes 8 minutes to heat 1.5 kg of milk from 4 °C to 95 °C. The specific heat capacity of milk is 4200 J·kg⁻¹·K⁻¹. What is the cooker’s efficiency (as a percentage)? Give your answer rounded to one decimal place. [1]

    (Conservation, dissipation and efficiency)
  5. During a lab experiment, a student pulls a metal rod along a frictionless track for 5 metres using a force of 70 N applied parallel to the track. Calculate the work done by the student. [1]

    (Work done)
  6. A car starts from rest and accelerates uniformly at \(3\text{ m s}^{-2}\) for \(5\) seconds. Calculate the distance travelled (to one decimal place). [1]

    (Speed, velocity and acceleration)

💼 Where it leads: Solar panel installer · Insulation engineer · Heat pump engineer · Gas service technician - more

Stuck, or finished? Scan for help on energy stores and calculations - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. B Acceleration refers to a change in speed only.
  2. 20
  3. 0.41
  4. 0.8
  5. D Insulate the outer surface of the calorimeter to prevent heat loss
  6. C internal (thermal)
  7. 54
  8. C chemical
  9. Elastic potential energy
  10. 160000
  11. Speed
  12. B Wearing safety goggles to protect against splashes
  13. Power
  14. Kinetic energy
  15. 2
    Ee = ½ke² = ½·200·(0.1)² = 1 J; ½mv² = 1 J ⇒ v = √(2/m) ≈ 2.0 m/s
  16. 86
    v = gt = 6×4 = 24 m/s; Ek = ½mv² = 0.5×0.3×(24)² ≈ 86 J
  17. 2.8
    ΔE = mcΔθ = 1×4180×80 = 334400 J; t = ΔE/P = 334400/2000 = 167.2 s = 2.8 min
  18. B A
  19. \frac{2y-3}{1+y}
    Cross‑multiply, bring all terms containing \(x\) to one side and factor.
  20. B A Speed is always positive; velocity includes magnitude and direction.
  21. 0.4 m
    Divide the known values of \(p\) by the product \(mg\).
  22. 49.8
  23. 350
    Work = Force × Distance = 70 N × 5 m
  24. 37.5

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on energy stores and calculations - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk