Revision › Forces, weight and resultant force › Worksheet

Forces, weight and resultant force Hard

GCSE Physics · Forces · Name ____________________ Date ________

Builds on: Density and changes of state, Internal energy and latent heat

Do now

Quick questions on earlier topics - to get your brain going.

  1. What is the density of a material if it has a mass of 8 kg and a volume of 2 m³? Express your answer in kg/m³. [1]

  2. During the density experiment with an irregular object, which of the following must be done to ensure accurate volume measurement? [1]

    1. D) Add salt to increase density
    2. C) Use a thermometer to measure temperature during measurement
    3. B) Record the water level before and after submerging the object
    4. A) Weigh the object inside the water
  3. Calculate the change in thermal energy (ΔE) when 0.3 kg of iron is heated from 25 °C to 40 °C. The specific heat capacity of iron is 450 J kg⁻¹ °C⁻¹. Give your answer in joules to the nearest joule. [1]

  4. In ∆E = mc∆θ, what does the symbol ‘c’ represent? [1]

Practice

  1. An astronaut has a mass of 80 kg on the Moon where the gravitational field strength is 1.6 N/kg. What is his weight in newtons, rounded to the nearest integer? [2]

  2. A 5 kg package is placed on a level surface near Earth's surface where \(g = 9.8\,\text{N/kg}\). What is its weight, expressed in newtons, rounded to the nearest whole number? [1]

  3. An object has a weight of \(120\,\text{N}\) on Earth where the gravitational field strength is \(9.8\,\text{N/kg}\). What is its mass in kilograms, rounded to the nearest integer? [1]

  4. A crate has a weight of 154 N on Earth, where the gravitational field strength is 9.8 N/kg. What is its mass in kilograms, rounded to the nearest integer? [1]

  5. A 50 kg satellite is moving at a speed that creates an effective gravitational field of \(g = 12\,\text{N/kg}\) due to centrifugal forces. What is the apparent weight of the satellite, expressed in newtons, rounded to one decimal place? [1]

  6. A 0.6 kg rock falls onto a surface where the local gravitational field strength is \(9.7\,\text{N/kg}\). What is its weight? Express your answer in newtons, rounded to one decimal place. [1]

  7. A box with mass 10 kg rests on a horizontal surface. The weight of the box is 98 N downward (using g=9.8 m s⁻²). It is held by a rope that pulls upwards with a force of 20 N. What is the magnitude of the resultant force acting on the box? Round to the nearest integer. [1]

  8. A spring balance reads 200 N when measuring an object that has a mass of 5000 g. Calculate the gravitational field strength (in N kg⁻¹) to one decimal place. [1]

  9. A 2400 g rock is placed on a spring balance at sea level. What is its weight (rounded to one decimal place)? Use \(g = 9.8\text{ N kg}^{-1}\). [1]

  10. Suppose an object has a mass of 14 kg on a planet where the gravitational field strength is 9.7 N kg⁻¹. Calculate its weight (to one decimal place). [1]

  11. An astronaut on a spacecraft with mass 70 kg is subject to a gravitational field of 1.6 N kg⁻¹. What will be her apparent weight? Round to the nearest integer. [1]

  12. Tick one box for a step that must be taken before measuring the weight of an object with a spring balance. ☐ Check that the balance reads zero when no load is applied. ☐ Place the object directly on the floor beside the balance. ☐ Record the temperature of the room. ☐ Adjust the scale to 100 kg. [1]

    1. Check that the balance reads zero when no load is applied.
    2. Place the object directly on the floor beside the balance.
    3. Adjust the scale to 100 kg.
    4. Record the temperature of the room.

Exam practice

Real past-paper questions on forces, weight and resultant force, with their mark schemes, are in 4 Triangles - free to practise.

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. A sealed container holds 5.0 g of carbon dioxide gas that occupies a volume of 400 cm³. Calculate the density in kg / m³, rounded to one decimal place. [2]

    (Density and changes of state)
  2. An electric door handle is pulled by a force of 25 N at a point 15 cm from the centre. What is the moment produced? [2]

    (Moments, levers and gears)
  3. A piece of aluminium has a mass of 3.6 g and occupies a volume of 1.4 cm³. Calculate its density in kg m⁻³, rounded to the nearest whole number. [2]

    (Density and changes of state)
  4. Which process will increase the internal energy of a closed system? A. Cooling the system B. Increasing its pressure while keeping temperature constant C. Heating the system D. Adding mass to the system [1]

    1. Heating the system
    2. Adding mass to the system
    3. Increasing its pressure while keeping temperature constant
    4. Cooling the system
    (Internal energy and latent heat)
  5. In a gear system where Gear A has 20 teeth and Gear B has 40 teeth, which statement is true? [2]

    1. Both gears will have equal torque.
    2. The ratio of their angular speeds equals the ratio of their radii.
    3. Gear A will rotate twice as fast as Gear B.
    4. Gear A will rotate at half the speed of Gear B.
    (Moments, levers and gears)
  6. Which of the following precautions is most important when measuring the spring constant using a hanging‑mass apparatus? [1]

    1. Use a spring that has already been stretched beyond its limit
    2. Ensure the mass does not hit the floor before equilibrium is reached
    3. Neglect the weight of the hanging mass if it is small
    4. Apply the largest possible mass to get a large extension
    (Springs and elasticity)

💼 Where it leads: Cycle mechanic · Crane driver · Motor mechanic · Road traffic accident investigator - more

Stuck, or finished? Scan for help on forces, weight and resultant force - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. 4
  2. C B) Record the water level before and after submerging the object
  3. 2025
  4. specific heat capacity
  5. 128
  6. 49
  7. 12
  8. 16
  9. 600
  10. 5.8
  11. 78
  12. 40 N kg⁻¹
  13. 23.5
  14. 135.8
  15. 112
  16. A Check that the balance reads zero when no load is applied.
    1. The balance must be zeroed before measuring a load, otherwise the reading will include any offset.
  17. 12.5
    5 g = 0.005 kg; 400 cm³ = 4×10⁻⁴ m³; density = 0.005 ÷ 4×10⁻⁴ = 12.5 kg/m³.
  18. 3.75
    Convert centimetres to metres: 15 cm = 0.15 m. Then use M = F × d.
  19. 2570
  20. A Heating the system
  21. C Gear A will rotate twice as fast as Gear B.
  22. B Ensure the mass does not hit the floor before equilibrium is reached

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on forces, weight and resultant force - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk