Revision › Gas pressure › Worksheet
Gas pressure Medium
GCSE Physics · Particle Model of Matter · Name ____________________ Date ________
Do now
Quick questions on earlier topics - to get your brain going.
What is the density of a material if it has a mass of 8 kg and a volume of 2 m³? Express your answer in kg/m³. [1]
During the density experiment with an irregular object, which of the following must be done to ensure accurate volume measurement? [1]
- D) Add salt to increase density
- C) Use a thermometer to measure temperature during measurement
- B) Record the water level before and after submerging the object
- A) Weigh the object inside the water
Practice
A scientist fills a rigid metal tank with air at a pressure of 160 kPa and temperature of 20°C. The temperature is then increased to 60°C while the volume remains unchanged. Assuming ideal behaviour, what will be the new pressure in kPa (rounded to the nearest integer)? [1]
A sealed syringe initially contains gas at a pressure of 150 kPa and volume of 0.4 m³. If the pressure is increased to 300 kPa, what will be the new volume? Give your answer in litres rounded to the nearest litre. [1]
Which of the following statements best compares the response of a gas and a liquid to an increase in temperature, keeping volume constant? A) Both gases and liquids experience an equal increase in pressure. B) Only a gas will show an appreciable rise in pressure. C) A liquid will expand, increasing its pressure, but a gas will not. D) Neither gas nor liquid change their pressure. [1]
- C
- A
- D
- B
When measuring the pressure of a gas in a syringe using a manometer, which statement is true regarding the setup? A) The syringe must be left open to the atmosphere. B) The liquid column height difference corresponds to the pressure differential. C) The syringe should be at least 1 m tall. D) The manometer reads in kPa directly. [1]
- D
- B
- C
- A
An experiment uses a syringe that initially holds 0.5 m³ of air at a pressure of 200 kPa. If the volume is reduced to 0.2 m³, what is the new pressure? Give your answer in kPa rounded to one decimal place. [1]
A sealed can contains a gas at a pressure of 1 atm and occupies a volume of 0.20 m³. The gas is compressed to a volume of 0.05 m³ while temperature stays constant. What is the new pressure in kPa? Give your answer rounded to the nearest integer. [1]
A container of gas has a volume of 0.10 m³ and is at a pressure of 80 kPa. The temperature is kept constant while the pressure increases to 160 kPa. What is the new volume of the gas? Provide your answer in m³. [1]
Air occupies a fixed volume of 0.02 m³ at a pressure of 100 kPa. If the temperature is kept constant and the pressure is raised to 250 kPa, what will the new volume be? Give your answer in m³. [1]
According to PV = constant (fixed mass at constant T), what happens to pressure when the volume is doubled? [1]
When work is done on a gas, its internal energy _______. [1]
What property rises when the average kinetic energy of gas molecules increases? [1]
The mean kinetic energy of gas molecules is directly proportional to which of the following? Tick one box. [1]
- ☐ Molecular mass
- ☐ Pressure
- ☐ Temperature
- ☐ Volume
Stretch
A step up - try these if you finish.
A sealed piston contains a fixed mass of gas at an initial pressure of 200 kPa and volume of 0.05 m³. The pressure is increased to 300 kPa while the temperature remains constant. Using Boyle’s law, calculate the new volume of the gas. Give your answer to one decimal place in litres. [2]
When measuring the pressure of a gas with a manometer, which practice is essential for an accurate reading? Tick one box. [1]
- ☐ Ensure the instrument is level.
- ☐ Use an unsealed container.
- ☐ Keep the temperature constant.
- ☐ Measure at the mid‑point of the tube.
An enclosed bottle initially contains gas at a pressure of 150 kPa and a volume of 0.04 m³. The volume is increased to 0.08 m³ while the temperature remains constant. Calculate the new pressure in kPa, rounding to the nearest kPa. [2]
A sealed car tyre is kept at a constant volume. If the external temperature rises from 20 °C to 30 °C, what happens to the pressure inside the tyre? Tick one box. [1]
- ☐ The pressure stays the same.
- ☐ It depends on the volume of the tyre.
- ☐ The pressure increases.
- ☐ The pressure decreases.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
Which of the following best describes latent heat? A. Energy stored as potential energy only. B. Energy required for a change of state at constant temperature. C. Energy released when a substance freezes. D. Energy needed to increase the mass of a substance. [1]
- A
- D
- C
- B
The density of copper is 8.96 g/cm³. What is the mass of a 50‑cm³ sample? [1]
(Density and changes of state)Which piece of equipment is essential when measuring the volume of an irregular solid by water displacement? [1]
- c) Displacement can with a narrow spout
- a) Vernier caliper
- d) Analytical balance
- b) Beaker
The specific latent heat of fusion of ice is 334 kJ kg⁻¹. How many kilograms of ice melt when 1000 kJ of energy is supplied? Give your answer to one decimal place. [1]
(Internal energy and latent heat)Which of the following is a necessary safety precaution when measuring atmospheric pressure with a barometer? [1]
- Use a high‑altitude environment for accuracy.
- Avoid calibrating it regularly.
- Keep the barometer in direct sunlight.
- Ensure the barometer has no air leaks.
A fluid exerts a force of 80 N over an area of 0.5 m². Calculate the pressure on the surface. Give your answer to the nearest Pa. [1]
(Pressure in fluids)
Still going? Unlimited questions on gas pressure, marked as you go: 4triangles.co.uk
💼 Where it leads: Plumber · Baker · Heating and ventilation engineer · Commercial diver - more
Stuck, or finished? Scan for help on gas pressure - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- 4
- C B) Record the water level before and after submerging the object
- 182
- 200
- D B
- B B
- 500
- 405
- 0.05
Boyle’s law: V₂=(p₁×V₁)/p₂. V₂=80 kPa×0.10 m³/160 kPa=0.05 m³. - 0.008
Use Boyle’s law: V₂=(p₁×V₁)/p₂. V₂=100 kPa×0.02 m³/250 kPa=0.008 m³. - Halved.
- Increases.
- Temperature.
- C ☐ Temperature
Average kinetic energy is proportional to absolute temperature (ideal gases). - 33.3
p₁V₁ = p₂V₂ → V₂ = (p₁V₁)/p₂ = (200 kPa × 0.05 m³)/(300 kPa) = 0.0333 m³ = 33.3 L - A ☐ Ensure the instrument is level.
- 75
p₁V₁ = p₂V₂ → p₂ = (p₁V₁)/V₂ = (150 kPa × 0.04 m³)/0.08 m³ = 75 kPa - C ☐ The pressure increases.
- D B
- 448
- A c) Displacement can with a narrow spout
- 3
- D Ensure the barometer has no air leaks.
- 160
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on gas pressure - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk