Revision › Induction and transformers › Worksheet
Induction and transformers Medium
GCSE Physics · Magnetism & Electromagnetism · Name ____________________ Date ________
Builds on: Magnets and electromagnets, The motor effect
Do now
Quick questions on earlier topics - to get your brain going.
Which of the following statements is true about permanent magnets? [1]
- ☐ They produce their own magnetic field.
- ☐ They have only one pole.
- ☐ Their poles change direction when moved.
- ☐ They become magnetic only when placed in a strong external field.
A coil of wire wrapped around a core produces a magnetic field of 0.4 T when it has 250 turns of wire carrying a current of 3 A. If the current is kept at 3 A, how many turns are required to produce a magnetic field of 1.6 T? (Give your answer as a whole number of turns.) [1]
What principle allows a loudspeaker to convert electrical signals into sound waves? [1]
Which rule shows the relative orientation of force, current and magnetic field in a conductor? [1]
Practice
A transformer supplies 120 W to a load at 12 V. The turns ratio of the primary to secondary is 10 : 1. Assuming 100 % efficiency, what is the current drawn from the mains? Give your answer in amperes. [1]
When a wire is moved through a magnetic field but no closed circuit is completed, which statement is correct? A) An electric current will still flow along the wire. B) A potential difference will be induced across the ends of the wire, but no current flows. C) Nothing happens – neither voltage nor current is produced. D) Both voltage and current are produced. [1]
- B
- C
- A
- D
Which safety precaution is essential when measuring voltage across a transformer secondary coil using a multimeter? A) Connect the meter in parallel to avoid damaging the circuit B) Ensure the meter leads are shorted before connection C) Only use a wattmeter, not a voltmeter D) The meter should be disconnected after each measurement [1]
- A
- D
- C
- B
Which factor(s) affect the magnitude of an induced electromotive force (emf) in a conductor? A) Only the speed at which the conductor moves B) Only the strength of the magnetic field C) Only the number of turns in the coil D) All of the above [1]
- B
- D
- C
- A
A device rotates a coil inside a constant magnetic field and uses a rectifier to produce a unidirectional output. What type of current does the device generate? A) Alternating current (AC) B) Direct current (DC) C) Both AC and DC D) Neither, it produces voltage but no current [1]
- D
- A
- C
- B
A step‑down transformer has a primary winding of 200 turns and a secondary winding of 50 turns. If the mains supply is 240 V, what will be the voltage across the secondary winding? Give your answer in volts. [1]
Which law explains the magnetic field produced by an induced current that opposes the change in a conductor? [1]
A transformer has a primary coil with 80 turns and supplies 200 V to the mains. The secondary voltage is 400 V. How many turns are on the secondary coil? [1]
The generator effect is used to produce AC electricity in which device? [1]
The equation Vs × Is = Vp × Ip expresses equality of which physical quantity? [1]
A transformer that raises the secondary voltage above the primary voltage is known as a _______ transformer. [1]
Tick one box – Which of the following must be checked before connecting a transformer to the mains supply? A) The voltage rating of the primary winding B) The resistance of the secondary coil C) The length of the lead wire D) The temperature of the core [1]
- A
- C
- D
- B
Stretch
A step up - try these if you finish.
If the magnetic flux through each turn changes at a rate of 0.02 Wb s⁻¹ and there are 30 turns, what is the magnitude of the induced emf in volts? [2]
A transformer supplies a lamp rated at 100 W using a 230 V supply. The primary coil has 600 turns and the secondary coil has 200 turns. Assuming the transformer is ideal, what current flows through the lamp? Give your answer rounded to two decimal places. [2]
An ideal transformer has a primary coil of 300 turns and a secondary coil of 900 turns. The primary is supplied with 220 V at a steady current of 5 A. What is the current in the secondary, assuming no power loss? Give your answer rounded to two decimal places. [2]
Which statement reflects a common misconception about transformers? [1]
- An iron core is used because it reduces magnetic flux density.
- Transformers can increase power output without losses.
- Lenz’s law explains the direction of induced current.
- A higher number of turns in the secondary always gives a higher voltage.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
Which statement best describes the magnetic field created by a straight current‑carrying conductor? [1]
- The field strength is directly proportional to distance from the wire.
- The field lines are parallel to the length of the wire.
- The field strength increases as you move away from the wire.
- The field lines form circles centred on the wire, with strength inversely proportional to distance.
In a toy electric motor, a coil of wire is placed between two permanent magnets. When current flows through the coil it experiences a force that causes the axle to rotate. Which part of this setup provides the magnetic field for the motor effect? [1]
- The axle
- The coil
- The permanent magnets
- The battery
A bar magnet is 12 cm long, with its north pole at one end and the south pole at the other. A small iron nail is held 3 cm from the north pole. What fraction of the total length of the magnet is the distance from the centre of the magnet to the nail? Express your answer as a fraction. [1]
(Magnets and electromagnets)
Still going? Unlimited questions on induction and transformers, marked as you go: 4triangles.co.uk
💼 Where it leads: Power station worker · Wind turbine technician · Electrician · Electrical engineer - more
Stuck, or finished? Scan for help on induction and transformers - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- A ☐ They produce their own magnetic field.
- 1000
- Motor effect
- Fleming's left-hand rule
- 1
- A B
- A A
- B D
- D B
- 60
- Lenz's Law
- 160
- alternator
- power
- step‑up
- A A
- 0.6
- 1.3
- 1.67
- B Transformers can increase power output without losses.
- D The field lines form circles centred on the wire, with strength inversely proportional to distance.
- C The permanent magnets
- 1/4
Centre is at 6 cm; distance to nail = |6‑3|=3 cm. Fraction = 3/12 = 1/4
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on induction and transformers - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk