Revision › Moments, levers and gears › Worksheet
Moments, levers and gears Easy
GCSE Physics · Forces · Name ____________________ Date ________
Builds on: Forces, weight and resultant force, Springs and elasticity
Do now
Quick questions on earlier topics - to get your brain going.
Which of the following statements correctly describes a force? [1]
- It has both magnitude and direction.
- It has magnitude only.
- It is always contact.
- It cannot be represented by an arrow.
Name one example of a contact force. [1]
A force of 5 N stretches a spring by 0.20 m. Find the spring constant k. (Give your answer in N/m) [1]
What are the units of a spring constant? [1]
Practice
When an object balances at its pivot, the total clockwise moments must equal the total ___ moments. [1]
A force of 18 N is applied at a distance of 0.15 m from the pivot of a lever. Calculate the moment produced by this force (express your answer in Nm). [1]
A seesaw has one side 2.0 m long and the other side 1.5 m long from the pivot. If a child weighing 400 N sits on the shorter side, how far must an adult weighing 2000 N sit on the longer side to balance the seesaw? Express your answer in metres. [1]
A small gear with radius 0.05 m turns under a moment of 12 Nm. If it drives a larger gear with radius 0.15 m, calculate the moment produced on the larger gear. [1]
Which of the following best defines a "moment"? [1]
- The resistance to motion offered by friction.
- The force applied at any point on an object.
- The product of a force and its perpendicular distance from a pivot.
- The mass times acceleration of an object.
Which of the following statements about moments is incorrect? [1]
- The moment increases if the applied force increases.
- The direction (clockwise or anticlockwise) of a moment is irrelevant for calculations of balance.
- The distance used in calculating a moment must be the perpendicular distance from the pivot to the line of action of the force.
- A longer lever arm produces a greater moment for the same applied force.
Which statement correctly describes the condition for an object to be balanced about a pivot? [1]
- The distance from the pivot to each force must be equal.
- The total clockwise moment equals the total anticlockwise moment.
- The sum of all forces acting on the object must be zero.
- The total clockwise moment is greater than the total anticlockwise moment.
Stretch
A step up - try these if you finish.
Tick one box: When a lever is balanced about its pivot, which of the following statements must be true? [1]
- The forces on both sides are equal.
- The distances from the pivot to each force are equal.
- The total clockwise moment equals the total anticlockwise moment.
- The lever arm lengths are identical.
Tick one box: Which of the following best defines a lever? [1]
- A device that converts linear motion into rotational motion.
- An arrangement where the moment applied equals the force applied.
- A system where two gears rotate together to change speed or force.
- A simple machine consisting of a rigid bar pivoted at one end to provide mechanical advantage.
A child balances a see‑saw by sitting 2 m from the pivot with a weight of 200 N. An adult sits on the other side and weighs 600 N. Which statement best explains why the child does not have to sit further than 2 m for balance? [1]
- The see‑saw automatically adjusts its pivot point.
- A larger force at a shorter distance produces the same moment as a smaller force at a longer distance.
- The child’s weight is greater, so he can be closer.
- Only the weights matter; distances are irrelevant.
Tick one box: In a gear system, which statement correctly compares the effects of a larger driven gear to a smaller driven gear when they rotate with equal torque applied by the driver? [1]
- The smaller driven gear always produces more mechanical advantage.
- The larger driven gear rotates slower but exerts greater moment (torque).
- Both gears always rotate at the same speed regardless of size.
- The larger driven gear rotates faster but with less torque.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
What SI units express momentum? [1]
(Momentum)Two forces act on a box, one of 15 N to the right and one of 7 N to the left. What is the magnitude and direction of the resultant force? [1]
(Forces, weight and resultant force)What type of energy is stored when a spring is compressed or stretched? [1]
(Springs and elasticity)When using a calibrated spring balance to measure an object's weight, which of the following steps is essential? [1]
- Wrap the object in cloth to reduce air resistance.
- Place the object on a hard surface.
- Use a wooden plank under the balance.
- Ensure the balance has zero reading before attaching the object.
To stretch an elastic string, which of the following statements is false? [1]
- The forces must act in opposite directions.
- The tension must be equal at both ends.
- The deformation will occur as long as the forces are applied.
- Only one pulling force at each end is required.
The equation F = m Δv/Δt shows that force is proportional to the change in ________? [1]
(Momentum)
Still going? Unlimited questions on moments, levers and gears, marked as you go: 4triangles.co.uk
💼 Where it leads: Cycle mechanic · Crane driver · Motor mechanic · Road traffic accident investigator - more
Stuck, or finished? Scan for help on moments, levers and gears - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- A It has both magnitude and direction.
- friction
- 25
- N/m
- Anticlockwise
- 2.7
- 0.3
- 36
- C The product of a force and its perpendicular distance from a pivot.
- B The direction (clockwise or anticlockwise) of a moment is irrelevant for calculations of balance.
- B The total clockwise moment equals the total anticlockwise moment.
- C The total clockwise moment equals the total anticlockwise moment.
- D A simple machine consisting of a rigid bar pivoted at one end to provide mechanical advantage.
- B A larger force at a shorter distance produces the same moment as a smaller force at a longer distance.
- B The larger driven gear rotates slower but exerts greater moment (torque).
- kg m/s
- 8
Resultant = 15‑7 = 8 N to the right. - Elastic potential energy
- D Ensure the balance has zero reading before attaching the object.
Calibration requires zeroing the instrument first. - D Only one pulling force at each end is required.
- momentum
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on moments, levers and gears - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk