Revision › Moments, levers and gears › Worksheet
Moments, levers and gears Medium
GCSE Physics · Forces · Name ____________________ Date ________
Builds on: Forces, weight and resultant force, Springs and elasticity
Do now
Quick questions on earlier topics - to get your brain going.
Which of the following statements correctly describes a force? [1]
- It has both magnitude and direction.
- It has magnitude only.
- It is always contact.
- It cannot be represented by an arrow.
Name one example of a contact force. [1]
A force of 5 N stretches a spring by 0.20 m. Find the spring constant k. (Give your answer in N/m) [1]
What are the units of a spring constant? [1]
Practice
Tick one box: When a lever is balanced about its pivot, which of the following statements must be true? [1]
- The forces on both sides are equal.
- The distances from the pivot to each force are equal.
- The total clockwise moment equals the total anticlockwise moment.
- The lever arm lengths are identical.
Tick one box: Which of the following best defines a lever? [1]
- A device that converts linear motion into rotational motion.
- An arrangement where the moment applied equals the force applied.
- A system where two gears rotate together to change speed or force.
- A simple machine consisting of a rigid bar pivoted at one end to provide mechanical advantage.
A child balances a see‑saw by sitting 2 m from the pivot with a weight of 200 N. An adult sits on the other side and weighs 600 N. Which statement best explains why the child does not have to sit further than 2 m for balance? [1]
- The see‑saw automatically adjusts its pivot point.
- A larger force at a shorter distance produces the same moment as a smaller force at a longer distance.
- The child’s weight is greater, so he can be closer.
- Only the weights matter; distances are irrelevant.
Tick one box: In a gear system, which statement correctly compares the effects of a larger driven gear to a smaller driven gear when they rotate with equal torque applied by the driver? [1]
- The smaller driven gear always produces more mechanical advantage.
- The larger driven gear rotates slower but exerts greater moment (torque).
- Both gears always rotate at the same speed regardless of size.
- The larger driven gear rotates faster but with less torque.
A cyclist pedals a bike with a force of 15 N applied at the rim of a gear whose radius is 0.25 m. Calculate the moment that drives the rear wheel in newton metres. [1]
Tick one box: Which of the following is essential to ensure safe use when employing a lever to lift a heavy load? [1]
- Using the shortest possible lever arm for maximum mechanical advantage.
- Using a lever with the pivot as close as possible to the load.
- Ensuring the lever material can withstand the bending moment, and securing both ends of the lever.
- Applying force at the exact centre of gravity of the load.
When an object balances at its pivot, the total clockwise moments must equal the total ___ moments. [1]
A force of 18 N is applied at a distance of 0.15 m from the pivot of a lever. Calculate the moment produced by this force (express your answer in Nm). [1]
A seesaw has one side 2.0 m long and the other side 1.5 m long from the pivot. If a child weighing 400 N sits on the shorter side, how far must an adult weighing 2000 N sit on the longer side to balance the seesaw? Express your answer in metres. [1]
A small gear with radius 0.05 m turns under a moment of 12 Nm. If it drives a larger gear with radius 0.15 m, calculate the moment produced on the larger gear. [1]
Which of the following best defines a "moment"? [1]
- The resistance to motion offered by friction.
- The force applied at any point on an object.
- The product of a force and its perpendicular distance from a pivot.
- The mass times acceleration of an object.
Which of the following statements about moments is incorrect? [1]
- The moment increases if the applied force increases.
- The direction (clockwise or anticlockwise) of a moment is irrelevant for calculations of balance.
- The distance used in calculating a moment must be the perpendicular distance from the pivot to the line of action of the force.
- A longer lever arm produces a greater moment for the same applied force.
Stretch
A step up - try these if you finish.
An electric door handle is pulled by a force of 25 N at a point 15 cm from the centre. What is the moment produced? [2]
In a gear system where Gear A has 20 teeth and Gear B has 40 teeth, which statement is true? [2]
- Both gears will have equal torque.
- The ratio of their angular speeds equals the ratio of their radii.
- Gear A will rotate twice as fast as Gear B.
- Gear A will rotate at half the speed of Gear B.
A child lifts a book weighing 2.5 kg using a lever where the book is 0.40 m from the pivot. She applies a force of 30 N at 0.25 m from the pivot. At what distance (in metres, to 2 d.p.) must the book be positioned so that the seesaw balances? A. B. C. D. (Tick one box.) [2]
When using a lever to lift a heavy load, which of the following statements is correct? [1]
- The pivot should always be placed as close as possible to the load.
- The pivot must be located outside the load.
- The lever arm of the load must be shorter than that of the effort.
- It is safer to position the effort arm longer than the load arm when lifting a heavy object.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
Which of the following is a necessary safety measure when performing the spring‑extension experiment? [1]
- Ensure the clamp stand is securely fastened to the bench.
- Use a ruler that can rotate freely.
- Keep all weights off the floor at all times.
- Place the spring on a soft cushion.
A spring has a spring constant of 120 N/m and is stretched by 60 mm. Calculate the elastic potential energy stored (in J) to two decimal places. [1]
(Springs and elasticity)A trolley of mass 6 kg moves at a constant speed of 2.5 m s⁻¹ on a level track. What is its momentum, to one decimal place? [1]
(Momentum)A box with mass 10 kg rests on a horizontal surface. The weight of the box is 98 N downward (using g=9.8 m s⁻²). It is held by a rope that pulls upwards with a force of 20 N. What is the magnitude of the resultant force acting on the box? Round to the nearest integer. [1]
(Forces, weight and resultant force)A spring balance reads 200 N when measuring an object that has a mass of 5000 g. Calculate the gravitational field strength (in N kg⁻¹) to one decimal place. [1]
(Forces, weight and resultant force)A cyclist with a mass of 70 kg rides at 4 m s⁻¹. What is the magnitude of his momentum? [1]
(Momentum)
Still going? Unlimited questions on moments, levers and gears, marked as you go: 4triangles.co.uk
💼 Where it leads: Cycle mechanic · Crane driver · Motor mechanic · Road traffic accident investigator - more
Stuck, or finished? Scan for help on moments, levers and gears - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- A It has both magnitude and direction.
- friction
- 25
- N/m
- C The total clockwise moment equals the total anticlockwise moment.
- D A simple machine consisting of a rigid bar pivoted at one end to provide mechanical advantage.
- B A larger force at a shorter distance produces the same moment as a smaller force at a longer distance.
- B The larger driven gear rotates slower but exerts greater moment (torque).
- 3.75
- C Ensuring the lever material can withstand the bending moment, and securing both ends of the lever.
- Anticlockwise
- 2.7
- 0.3
- 36
- C The product of a force and its perpendicular distance from a pivot.
- B The direction (clockwise or anticlockwise) of a moment is irrelevant for calculations of balance.
- 3.75
Convert centimetres to metres: 15 cm = 0.15 m. Then use M = F × d. - C Gear A will rotate twice as fast as Gear B.
- 0.31
Weight of book = m·g = 2.5 kg × 9.8 m s⁻² ≈ 24.5 N Moment from child’s effort = 30 N × 0.25 m = 7.5 Nm For balance: weight × distance(book) = effort moment → 24.5 N × d = 7.5 Nm → d = 7.5 ÷ 24.5 ≈ 0.306 m → to two decimal places, **0.31 m**. (If one uses g≈10 m s⁻² the weight is 25 N and the distance would be 7.5/25 = 0.30 m; this is a common approximation but gives a slightly lower value.) - D It is safer to position the effort arm longer than the load arm when lifting a heavy object.
- A Ensure the clamp stand is securely fastened to the bench.
- 0.22
e = 0.06 m; Ee = ½ k e² = ½×120×0.06² = 0.216 J ≈ 0.22 J - 15
- 78
- 40 N kg⁻¹
- 280
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on moments, levers and gears - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk