Revision › Springs and elasticity › Worksheet
Springs and elasticity Medium
GCSE Physics · Forces · Name ____________________ Date ________
Builds on: Forces, weight and resultant force, Density and changes of state, Internal energy and latent heat
Do now
Quick questions on earlier topics - to get your brain going.
Which of the following statements correctly describes a force? [1]
- It has both magnitude and direction.
- It has magnitude only.
- It is always contact.
- It cannot be represented by an arrow.
Name one example of a contact force. [1]
What is the density of a material if it has a mass of 8 kg and a volume of 2 m³? Express your answer in kg/m³. [1]
During the density experiment with an irregular object, which of the following must be done to ensure accurate volume measurement? [1]
- D) Add salt to increase density
- C) Use a thermometer to measure temperature during measurement
- B) Record the water level before and after submerging the object
- A) Weigh the object inside the water
Practice
Which of the following is a necessary safety measure when performing the spring‑extension experiment? [1]
- Ensure the clamp stand is securely fastened to the bench.
- Use a ruler that can rotate freely.
- Keep all weights off the floor at all times.
- Place the spring on a soft cushion.
A spring has a spring constant of 120 N/m and is stretched by 60 mm. Calculate the elastic potential energy stored (in J) to two decimal places. [1]
An elastic rubber band stretches by 0.08 m when a force of 2.5 N is applied. Calculate the spring constant (k) of the rubber band, giving your answer to the nearest whole number (N/m). [1]
A rubber band is stretched by 15 cm when a force of 4.5 N is applied. What is the spring constant in N/m? Give your answer to one decimal place. [1]
An experimental spring was loaded with a series of weights, producing extensions as follows: weight 0 N gives extension 0 m; 49.5 N gives 0.05 m; 98.1 N gives 0.10 m. Using the linear relationship, calculate the spring constant to the nearest whole number (N/m). [1]
An engineer uses a metal rod as a spring in a hinge. If pulling 5 N causes an extension of 0.02 m, what would be the extension if 12 N were applied, assuming linear behaviour? Give your answer to the nearest centimetre. [1]
A force of 5 N stretches a spring by 0.20 m. Find the spring constant k. (Give your answer in N/m) [1]
What are the units of a spring constant? [1]
What type of energy is stored when a spring is compressed or stretched? [1]
To stretch an elastic string, which of the following statements is false? [1]
- The forces must act in opposite directions.
- The tension must be equal at both ends.
- The deformation will occur as long as the forces are applied.
- Only one pulling force at each end is required.
Which of the following is an example of a force that stretches an object? [1]
- Pushing on a soda can to squeeze it
- Bending a paperclip by rotating it
- Compressing a spring
- Pulling on a rubber band to extend it
Which law relates force and extension for a spring in its elastic range? [1]
Stretch
A step up - try these if you finish.
Which of the following precautions is most important when measuring the spring constant using a hanging‑mass apparatus? [1]
- Use a spring that has already been stretched beyond its limit
- Ensure the mass does not hit the floor before equilibrium is reached
- Neglect the weight of the hanging mass if it is small
- Apply the largest possible mass to get a large extension
A toy car’s bumper behaves like a spring. When the bumper compresses by 0.05 m under a load of 2 N, what is its spring constant? [2]
A stretchable rubber band is fixed between two poles in a greenhouse. A pot weighing 5 kg hangs from it. The band stretches by 0.12 m before the pot reaches equilibrium. Assuming Hooke’s law applies, what is the magnitude of the force exerted by the pot on the band? (Take g = 9.8 s⁻²) [2]
A spring has a spring constant of 40 N/m. A student adds masses sequentially until the total mass is 1.5 kg (weight = mg). What is the extension, in metres? Give your answer to two decimal places. [2]
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
Which of the following best describes latent heat? A. Energy stored as potential energy only. B. Energy required for a change of state at constant temperature. C. Energy released when a substance freezes. D. Energy needed to increase the mass of a substance. [1]
- A
- D
- C
- B
The density of copper is 8.96 g/cm³. What is the mass of a 50‑cm³ sample? [1]
(Density and changes of state)Which piece of equipment is essential when measuring the volume of an irregular solid by water displacement? [1]
- c) Displacement can with a narrow spout
- a) Vernier caliper
- d) Analytical balance
- b) Beaker
Tick one box: When a lever is balanced about its pivot, which of the following statements must be true? [1]
- The forces on both sides are equal.
- The distances from the pivot to each force are equal.
- The total clockwise moment equals the total anticlockwise moment.
- The lever arm lengths are identical.
The specific latent heat of fusion of ice is 334 kJ kg⁻¹. How many kilograms of ice melt when 1000 kJ of energy is supplied? Give your answer to one decimal place. [1]
(Internal energy and latent heat)A trolley of mass 6 kg moves at a constant speed of 2.5 m s⁻¹ on a level track. What is its momentum, to one decimal place? [1]
(Momentum)
Still going? Unlimited questions on springs and elasticity, marked as you go: 4triangles.co.uk
💼 Where it leads: Cycle mechanic · Crane driver · Motor mechanic · Road traffic accident investigator - more
Stuck, or finished? Scan for help on springs and elasticity - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- A It has both magnitude and direction.
- friction
- 4
- C B) Record the water level before and after submerging the object
- A Ensure the clamp stand is securely fastened to the bench.
- 0.22
e = 0.06 m; Ee = ½ k e² = ½×120×0.06² = 0.216 J ≈ 0.22 J - 31
k = F / e = 2.5 N ÷ 0.08 m = 31.25 N/m - 30
- 990
k = F/e = 49.5/0.05 = 990 N/m - 5
k = F/e = 5/0.02 = 250 N/m; e = F/k = 12/250 = 0.048 m = 4.8 cm ≈ 5 cm - 25
- N/m
- Elastic potential energy
- D Only one pulling force at each end is required.
- D Pulling on a rubber band to extend it
- Hooke's Law
- B Ensure the mass does not hit the floor before equilibrium is reached
- 40
Use F = k e k = F/e = 2 / 0.05 = 40 - 49
- 0.37
Weight = 1.5×9.8=14.7 N; e = F/k = 14.7/40 = 0.3675 ≈0.37 - D B
- 448
- A c) Displacement can with a narrow spout
- C The total clockwise moment equals the total anticlockwise moment.
- 3
- 15
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on springs and elasticity - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk