Revision › Work done › Worksheet
Work done Medium
GCSE Physics · Forces · Name ____________________ Date ________
Builds on: Energy stores and calculations, Speed, velocity and acceleration
Do now
Quick questions on earlier topics - to get your brain going.
The energy stored in a stretched spring is called ____. [1]
A car of mass 800 kg is moving at a speed of 20 m s⁻¹. Calculate its kinetic energy to the nearest joule. [1]
Which statement reflects a common misconception about acceleration? [1]
- Acceleration always increases with force.
- Acceleration refers to a change in speed only.
- Acceleration is a vector quantity.
- Acceleration can be positive or negative.
A cyclist rides 50 m east at a constant speed, then turns around and goes 30 m west. What is the overall displacement? [1]
Practice
During a lab experiment, a student pulls a metal rod along a frictionless track for 5 metres using a force of 70 N applied parallel to the track. Calculate the work done by the student. [1]
Which statement correctly describes the relationship between force, distance and work? [1]
- Work is force multiplied by distance only when the force is perpendicular to the displacement.
- Work equals force times distance along the direction of motion.
- Work is equal to the sum of force and distance.
- Work equals distance divided by force.
When measuring work done by pulling a cart, which of the following must be ensured to get accurate results? [1]
- The distance sensor measures displacement along the line of pull.
- The cart moves diagonally over a slope.
- The puller steps backward as the cart moves.
- The pulling force is applied at an angle of 45°.
A machine does 2.4 kJ of work in moving an object over a distance of 12 m. What is the average force applied in newtons? (Round to the nearest integer) [1]
A student pushes a box with 80 N while it slides sideways, perpendicular to the push. How much work is done? [1]
- 160 J.
- 240 J.
- 80 J.
- 0 J because displacement and force are perpendicular.
A worker pushes a 25‑kg cart horizontally across a level floor, applying a constant force of 60 N for 8 metres. Calculate the work done by the worker on the cart. [1]
Which of the following statements correctly compares work done against friction with work done against gravity? [1]
- Work against friction is always negative while work against gravity is always positive
- They are the same process and produce identical results
- Work against friction is converted into heat, whereas work against gravity changes potential energy
- Both result in kinetic energy increase only
An engineer pushes a car with a force of 400 N for a distance of 150 m. How much work does he do? [1]
Work done against friction causes a rise in what property of the object? [1]
What best defines the term 'work' in physics? [1]
- Mass multiplied by acceleration
- Energy transferred by a force causing displacement along its line of action
- The amount of force applied
- The speed at which an object moves
Which of the following is a safety consideration when measuring work done in a laboratory? [1]
- Use a force gauge that can measure at least 1000 N
- Perform all measurements during winter to avoid heat loss
- Ensure the displacement path is as long as possible to maximise energy transfer
- Wear appropriate gloves and eye protection, especially when using heavy weights
A worker lifts a box weighing 20 kg to a height of 3 m. The work done against gravity is calculated using \(W = mg h\). What is the work in joules? (Use g = 9.8 m/s²) [1]
Stretch
A step up - try these if you finish.
A worker pushes a sled with a constant horizontal force of 18 N over a distance of 12 m. What is the work done by the worker on the sled? Give your answer to 2 decimal places, in joules. [1]
Work and kinetic energy are related how? [1]
- Work is the change in kinetic energy, while kinetic energy is the work done by a force.
- The magnitude of work equals twice the kinetic energy of a body.
- Work is an amount of energy, whereas kinetic energy is a type of work.
- Work and kinetic energy are unrelated physical quantities.
An object moves a distance of 80 m while a constant force is applied. If the work done on the object is 4000 J, what is the magnitude of the force? Give your answer in newtons to two significant figures. [1]
A cyclist pushes a bicycle up a hill, lifting it vertically 3 m against gravity with an applied force equal to its weight (120 N). How much work has been done? Give your answer in joules to the nearest whole number. [1]
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
A 5 kg block is moving at 4 m s⁻¹ when it hits a wall and comes to rest after sliding 2 m while experiencing constant kinetic friction. What was the coefficient of kinetic friction between the block and the floor? (Use g = 9.81 m s⁻²). Give your answer rounded to two decimal places. [1]
(Energy stores and calculations)Which of the following statements correctly distinguishes speed from velocity? [1]
- C Speed can be expressed in metres per second, while velocity cannot.
- A Speed is always positive; velocity includes magnitude and direction.
- D Both speed and velocity are vector quantities.
- B Velocity has no direction but can be negative.
A domestic electric cooker has a rated power of 2400 W. It takes 8 minutes to heat 1.5 kg of milk from 4 °C to 95 °C. The specific heat capacity of milk is 4200 J·kg⁻¹·K⁻¹. What is the cooker’s efficiency (as a percentage)? Give your answer rounded to one decimal place. [1]
(Conservation, dissipation and efficiency)A car starts from rest and accelerates uniformly at \(3\text{ m s}^{-2}\) for \(5\) seconds. Calculate the distance travelled (to one decimal place). [1]
(Speed, velocity and acceleration)A house has two types of external walls: Wall X is 0.15 m thick and made of brick (thermal conductivity 0.72 W·m⁻¹·K⁻¹); Wall Y is 0.10 m thick and made of insulated foam (thermal conductivity 0.03 W·m⁻¹·K⁻¹). Which wall would result in a slower rate of heat transfer from the inside to outside? [1]
- A) Wall X because it has a higher thermal conductivity.
- B) Wall X because it is thicker than Wall Y.
- D) Wall Y because it is thicker but made of foam.
- C) Wall Y because it has a lower thermal conductivity and is thinner.
A toy catapult uses a spring with constant 250 N m⁻¹ compressed by 0.08 m before launching a 200‑g paper airplane. Calculate the elastic potential energy stored in the spring, to two decimal places (in J). [1]
(Energy stores and calculations)
Still going? Unlimited questions on work done, marked as you go: 4triangles.co.uk
💼 Where it leads: Cycle mechanic · Crane driver · Motor mechanic · Road traffic accident investigator - more
Stuck, or finished? Scan for help on work done - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- Elastic potential energy
- 160000
- B Acceleration refers to a change in speed only.
- 20
- 350
Work = Force × Distance = 70 N × 5 m - B Work equals force times distance along the direction of motion.
- A The distance sensor measures displacement along the line of pull.
- 200
Convert 2.4 kJ = 2400 J; Force = Work ÷ Distance = 2400 J ÷ 12 m = 200 N - D 0 J because displacement and force are perpendicular.
- 480
Work = Force × Distance = 60 N × 8 m - C Work against friction is converted into heat, whereas work against gravity changes potential energy
- 60000
- temperature.
- B Energy transferred by a force causing displacement along its line of action
- D Wear appropriate gloves and eye protection, especially when using heavy weights
- 588
- 216
- A Work is the change in kinetic energy, while kinetic energy is the work done by a force.
- 50
- 360
- 0.41
- B A Speed is always positive; velocity includes magnitude and direction.
- 49.8
- 37.5
- D C) Wall Y because it has a lower thermal conductivity and is thinner.
- 0.8
Stuck, or finished? Scan for help on work done - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk