The following are simple points to help you understand what GCSE science covers for this skill.
Key words
cell
a small device made from two different metals and an electrolyte that makes electricity.
electrolyte
liquid or paste that lets ions move between the metals.
oxidise
lose electrons.
reduce
gain electrons.
Key points
A cell uses two different metals and an electrolyte to make electricity.
The metal that loses electrons (oxidises) becomes the negative electrode; the other gains electrons (reduces).
Voltage, measured in volts (V), depends on which metals and electrolyte are used.
Cells wired in series have their voltages added to give a higher total.
Watch out for
The diagram for this question is not needed.
Remember: Keep each point short and use plain words. Good luck!
Chemical cells and fuel cells Stretch
A cell is a tiny galvanic system that converts chemical energy into electricity by redox reactions between two different metals in contact with an electrolyte. A battery simply joins several of these cells together so their voltages add.
Key words
galvanic
produces current from a spontaneous reaction
rechargeable
reactive chemistry can be reversed by applying an external current
Key points
Cells generate voltage because one metal oxidises while the other reduces, driving electrons through an external circuit.
In a simple cell the overall potential difference is set by the two electrode metals and the electrolyte; it is recorded as the cell’s emf.
Connecting cells in series sums their individual voltages; connecting them in parallel adds capacity but leaves voltage unchanged.
Non‑rechargeable cells (e.g. alkaline) run out of reactants once a limiting reagent is consumed; the redox reaction cannot be driven backwards by an external current.
Rechargeable cells can be recharged because the applied electric field pushes electrons back, restoring the original chemical state.
Fuel cells receive an external fuel such as H₂ and O₂; inside the cell the fuel oxidises to produce electricity and water, offering a cleaner alternative but generally at higher cost and lower energy density.
Watch out for
Assume cells are identical; a different cell type changes the sum.
Check that they are indeed in series – parallel would keep voltage at 1.5 V.
Don’t forget that voltages add, not capacities.
Remember: The reactivity series tells which metal oxidises first; choose electrodes for voltage and durability. Fuel cells cost more, have lower energy density, but produce only water, making them attractive where clean discharge is critical.
✏️ Try 3 quick questions
Which statement best compares rechargeable batteries with non‑rechargeable cells? (Tick one box)
A simple galvanic cell uses a zinc electrode and a copper electrode in an aqueous solution. The standard reduction potential of \(Zn^{2+}/Zn\) is \(-0.76\,\text{V}\) and that of \(Cu^{2+}/Cu\) is \(+0.34\,\text{V}\). Calculate the voltage produced by this cell to two decimal places.
A hydrogen fuel cell delivers 0.8 V per cell and each cell uses hydrogen at a rate of 1% per hour. To obtain a total voltage of 12 V for a device, how many such cells must be connected in series?
There are more on this in 4 Triangles, with hints and worked answers, and real past-paper questions. Carry on there.
Practise it with real exam questions
4 Triangles has quick questions on chemical cells and fuel cells, real GCSE past-paper questions with their mark schemes, and a revision plan that picks what to work on next.
Questions on this topic for a lesson, homework or revision - a quick "do now", misconception questions, small steps that change one thing at a time, and practice, with answers on the last page.