Revision › Life cycle assessment and recycling › Worksheet
Life cycle assessment and recycling Hard
GCSE Chemistry · Using Resources · Name ____________________ Date ________
Builds on: Reactivity, extraction, oxidation and reduction, Resources and potable water
Do now
Quick questions on earlier topics - to get your brain going.
Which element is commonly added to metal oxides to extract the metal by reduction? [1]
What term describes a reaction where oxygen is lost? [1]
In sewage treatment, which step separates solids from liquids by settling? [1]
Which of the following safety steps should be taken before distilling a water sample in the laboratory? (a) Verify that the reflux condenser is securely fixed. (b) Add more solvent to increase pressure. (c) Open the lid during heating. (d) Use an unsealed glassware. [1]
- (a) Verify that the reflux condenser is securely fixed.
- (d) Use an unsealed glassware.
- (b) Add more solvent to increase pressure.
- (c) Open the lid during heating.
Practice
During an LCA it was found that manufacturing a plastic shopping bag uses 0.05 kWh of energy and disposing one bag releases 2 g CO₂. For 10 000 bags, calculate the total energy used in manufacturing (in MJ), rounding to 1 decimal place. [2]
Which of the following disposal methods typically results in higher CO₂ emissions per kg of plastic waste? [1]
- A) Landfilling
- B) Incineration with energy recovery
- C) Mechanical recycling
- D) Chemical recycling
During one month, a café recycles 75 % of its food waste, which weighs 300 kg in total. How many kilograms of food waste are disposed of (not recycled) each month? [1]
A factory recycles aluminium scrap, producing 250 kg of recycled metal each year. Recycling aluminium saves 95 % of the energy required to produce new aluminium from ore. If producing fresh aluminium requires 12 MJ per kg, calculate the amount of energy (in MJ) saved by recycling 250 kg per year. [1]
Which of the following best defines a life cycle assessment (LCA)? [1]
- B) An analysis that quantifies the environmental impact of all stages of a product’s life.
- C) A method for measuring consumer satisfaction with a product.
- D) A system for classifying waste streams into recyclables and non‑recyclables.
- A) A process of testing the physical durability of a product.
In an LCA study of plastic waste disposal, which of the following statements is necessary for accurate energy consumption data? [1]
- D) Only consider transport distances.
- B) Assume average fuel energy content;
- C) Ignore auxiliary equipment;
- A) Use a calibrated power meter during incineration;
Which of the following best describes Life Cycle Assessment? A) A method for measuring a product’s energy consumption only during use. B) A tool that quantifies all environmental impacts from raw material extraction to disposal. C) A technique used solely by manufacturers to improve product design. D) A statistical analysis of consumer purchasing behaviour. [1]
- C
- A
- D
- B
Which stage of a life cycle assessment includes waste disposal and transport at the end of its useful life? A. Extracting and processing raw materials B. Manufacturing and packaging C. Use and operation during its lifetime D. Disposal at the end of its useful life, including transport [1]
- A
- C
- B
- D
If a paper bag production process emits 0.2 kg CO₂ per bag and a plastic bag emits 0.05 kg CO₂ per bag, how many paper bags would produce the same amount of CO₂ as 100 plastic bags? (Round to the nearest whole number.) [1]
A plastic shopping bag requires 50 kJ of energy to manufacture, while a paper bag needs 200 kJ. By what percentage is the paper bag’s manufacturing energy higher than that of the plastic bag? (Round to the nearest whole percent.) [1]
Which of the following is a required safety precaution when operating the recycling plant’s crushing machine? A. Wear safety goggles only B. Use protective gloves and ensure guards are in place C. Run machine without monitoring for 10 minutes after shift change D. Keep floor wet to reduce dust [1]
- D
- C
- A
- B
Which of these materials is most readily recycled with minimal loss of quality? A) Glass B) Plastic C) Aluminium D) Paper [1]
- B
- A
- C
- D
Exam practice
Real past-paper questions on life cycle assessment and recycling, with their mark schemes, are in 4 Triangles - free to practise.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
Which metal is more reactive at room temperature, magnesium or iron? (Tick one box.) [1]
- ☐ Iron
- ☐ Both are non‑reactive
- ☐ They have the same reactivity
- ☐ Magnesium
Which statement best explains why reverse osmosis requires more energy than simple distillation when treating seawater? A) Reverse osmosis uses high‑pressure pumps that consume electricity. B) Distillation can be performed using solar heat, whereas reverse osmosis cannot. C) Reverse osmosis concentrates salts on the feed side, while distillation removes them completely. D) Distillation must be carried out in a vacuum, increasing energy use. [1]
- B
- D
- A
- C
Which of the following best defines an electrolyte? [1]
- An inert electrode used in electrolysis.
- A substance that conducts electricity when solid.
- A metal that is oxidised to give electrons.
- A solution or molten substance containing ions that can move freely.
When a molten ionic compound is electrolysed using inert electrodes, which of the following will be produced at the anode? [1]
- Water is reduced to hydrogen gas.
- The metal ion is reduced to metal.
- A non‑metal ion is oxidised to its elemental form.
- Hydrogen ions are oxidised to oxygen gas.
Which of the following is essential when preparing a fresh water sample for an accurate pH measurement in a laboratory? A) Use a glass pipette and avoid touching the electrode with hands. B) Rinse the electrode with distilled water before each use. C) Store the sample in a plastic bottle for at least 24 h before testing. D) Add a small amount of acid to neutralise any carbonate ions. [1]
- D
- B
- A
- C
Still going? Unlimited questions on life cycle assessment and recycling, marked as you go: 4triangles.co.uk
💼 Where it leads: Recycling operative · Water network operative · Recycling officer · Climate scientist - more
Stuck, or finished? Scan for help on life cycle assessment and recycling - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- carbon
- reduction
- Sedimentation
- A (a) Verify that the reflux condenser is securely fixed.
- 1800
- B B) Incineration with energy recovery
Incineration releases CO₂ directly - 75
Recycled=0.75×300=225; disposed=300-225=75 kg - 2850
Fresh energy:12×250=3000 MJ; saved 95%:0.95×3000=2850 MJ - A B) An analysis that quantifies the environmental impact of all stages of a product’s life.
LCA covers entire life cycle - D A) Use a calibrated power meter during incineration;
- D B
LCA covers entire life cycle. - D D
- 25
100*0.05=5 kg CO₂; 5/0.2 = 25 - 300
- D B
Correct precaution is B. - C C
Aluminium retains quality after recycling. - D ☐ Magnesium
- C A
- D A solution or molten substance containing ions that can move freely.
- C A non‑metal ion is oxidised to its elemental form.
- B B
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on life cycle assessment and recycling - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk