Revision › Life cycle assessment and recycling › Worksheet

Life cycle assessment and recycling Medium

GCSE Chemistry · Using Resources · Name ____________________ Date ________

Builds on: Reactivity, extraction, oxidation and reduction, Resources and potable water

Do now

Quick questions on earlier topics - to get your brain going.

  1. Which element is commonly added to metal oxides to extract the metal by reduction? [1]

  2. What term describes a reaction where oxygen is lost? [1]

  3. In sewage treatment, which step separates solids from liquids by settling? [1]

  4. Which of the following safety steps should be taken before distilling a water sample in the laboratory? (a) Verify that the reflux condenser is securely fixed. (b) Add more solvent to increase pressure. (c) Open the lid during heating. (d) Use an unsealed glassware. [1]

    1. (a) Verify that the reflux condenser is securely fixed.
    2. (d) Use an unsealed glassware.
    3. (b) Add more solvent to increase pressure.
    4. (c) Open the lid during heating.

Practice

  1. Which of the following best describes Life Cycle Assessment? A) A method for measuring a product’s energy consumption only during use. B) A tool that quantifies all environmental impacts from raw material extraction to disposal. C) A technique used solely by manufacturers to improve product design. D) A statistical analysis of consumer purchasing behaviour. [1]

    1. C
    2. A
    3. D
    4. B
  2. Which stage of a life cycle assessment includes waste disposal and transport at the end of its useful life? A. Extracting and processing raw materials B. Manufacturing and packaging C. Use and operation during its lifetime D. Disposal at the end of its useful life, including transport [1]

    1. A
    2. C
    3. B
    4. D
  3. If a paper bag production process emits 0.2 kg CO₂ per bag and a plastic bag emits 0.05 kg CO₂ per bag, how many paper bags would produce the same amount of CO₂ as 100 plastic bags? (Round to the nearest whole number.) [1]

  4. A plastic shopping bag requires 50 kJ of energy to manufacture, while a paper bag needs 200 kJ. By what percentage is the paper bag’s manufacturing energy higher than that of the plastic bag? (Round to the nearest whole percent.) [1]

  5. Which of the following is a required safety precaution when operating the recycling plant’s crushing machine? A. Wear safety goggles only B. Use protective gloves and ensure guards are in place C. Run machine without monitoring for 10 minutes after shift change D. Keep floor wet to reduce dust [1]

    1. D
    2. C
    3. A
    4. B
  6. Which of these materials is most readily recycled with minimal loss of quality? A) Glass B) Plastic C) Aluminium D) Paper [1]

    1. B
    2. A
    3. C
    4. D
  7. Which of the following stages is NOT typically included in a life cycle assessment? [1]

    1. a) Extraction and processing of raw materials
    2. b) Manufacturing and packaging
    3. d) The colour of the product
    4. c) Use and operation during its lifetime
  8. Which of these materials generally has a higher recycling rate? [1]

    1. c) Both are equal
    2. a) Plastic bags
    3. d) None can be recycled
    4. b) Paper bags
  9. A shop uses 200 paper bags and 500 plastic bags in a month. If each paper bag requires 0.04 kWh to manufacture and each plastic bag requires 0.03 kWh, how much total energy is used for manufacturing both types of bags? Give your answer in kWh. [1]

  10. A supermarket buys 300 aluminium cans and 300 glass bottles. If it takes 0.05 kWh to recycle one aluminium can and 0.07 kWh for one glass bottle, which recycling option consumes more total energy? [1]

    1. a) Aluminium
    2. d) Neither is recycled
    3. b) Glass
    4. c) Both equal
  11. A shop disposes of 150 plastic bags per day and each bag generates 3 g of waste that requires incineration. How much waste in kilograms does the shop produce daily? Give your answer to two decimal places. [1]

  12. Which common product can be crushed and melted into new items without chemical change? [1]

Stretch

A step up - try these if you finish.

  1. During an LCA it was found that manufacturing a plastic shopping bag uses 0.05 kWh of energy and disposing one bag releases 2 g CO₂. For 10 000 bags, calculate the total energy used in manufacturing (in MJ), rounding to 1 decimal place. [2]

  2. Which of the following disposal methods typically results in higher CO₂ emissions per kg of plastic waste? [1]

    1. A) Landfilling
    2. B) Incineration with energy recovery
    3. C) Mechanical recycling
    4. D) Chemical recycling
  3. During one month, a café recycles 75 % of its food waste, which weighs 300 kg in total. How many kilograms of food waste are disposed of (not recycled) each month? [1]

  4. A factory recycles aluminium scrap, producing 250 kg of recycled metal each year. Recycling aluminium saves 95 % of the energy required to produce new aluminium from ore. If producing fresh aluminium requires 12 MJ per kg, calculate the amount of energy (in MJ) saved by recycling 250 kg per year. [1]

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which metal reacts faster with dilute acids at room temperature, zinc or iron? [1]

    1. Zinc
    2. Neither reacts
    3. Both react at the same speed
    4. Iron
    (Reactivity, extraction, oxidation and reduction)
  2. Which of the following metals will NOT react with a dilute solution of hydrochloric acid at room temperature? [1]

    1. Iron
    2. Copper
    3. Zinc
    4. Magnesium
    (Reactivity, extraction, oxidation and reduction)
  3. During the electrolysis of an aqueous solution of MgSO₄ with inert electrodes, which gas evolves at the cathode? (Tick one box) [1]

    1. H₂ gas
    2. SO₄²⁻ ion
    3. Mg metal
    4. O₂ gas
    (Electrolysis)
  4. A desalination plant produces 2000 L of potable water per day from sea water with an average salinity of 3.5 %. Assume the density of sea water is 1000 kg m⁻³. Calculate the mass of salt removed each day, to the nearest kilogram. [1]

    (Resources and potable water)
  5. How many cubic metres of water does a family of 5 consume in one week if the average daily consumption is 180 L per person? [2]

    (Resources and potable water)
  6. In the electrolysis of molten aluminium chloride the half‑reaction at the cathode is 6e⁻ + 2Al³⁺ → 2Al. If 5.4 mol of electrons are supplied to the cathode, how many moles of aluminium metal are produced? (Give answer to two decimal places). [1]

    (Electrolysis)

💼 Where it leads: Recycling operative · Water network operative · Recycling officer · Climate scientist - more

Stuck, or finished? Scan for help on life cycle assessment and recycling - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. carbon
  2. reduction
  3. Sedimentation
  4. A (a) Verify that the reflux condenser is securely fixed.
  5. D B
    LCA covers entire life cycle.
  6. D D
  7. 25
    100*0.05=5 kg CO₂; 5/0.2 = 25
  8. 300
  9. D B
    Correct precaution is B.
  10. C C
    Aluminium retains quality after recycling.
  11. C d) The colour of the product
    LCAs cover extraction, manufacturing, use, and disposal – colour is not a stage.
  12. D b) Paper bags
    Paper is usually recycled at a higher rate than plastic bags.
  13. 23
    200×0.04=8 kWh; 500×0.03=15 kWh; total = 23 kWh
  14. C b) Glass
    Total energy: 300×0.05=15 kWh vs 300×0.07=21 kWh – glass uses more.
  15. 0.45
    150×3 g=450 g = 0.45 kg
  16. glass bottles
  17. 1800
  18. B B) Incineration with energy recovery
    Incineration releases CO₂ directly
  19. 75
    Recycled=0.75×300=225; disposed=300-225=75 kg
  20. 2850
    Fresh energy:12×250=3000 MJ; saved 95%:0.95×3000=2850 MJ
  21. A Zinc
  22. B Copper
  23. A H₂ gas
  24. 70
    First convert 2000 L to cubic metres: 2000 L = 2.0 m³. Mass of seawater = volume × density = 2.0 m³ × 1000 kg m⁻³ = 2000 kg. Salt mass = 3.5 % of 2000 kg = 0.035 × 2000 kg = 70 kg. Rounded to the nearest kilogram, answer is 70 kg.
  25. 6.3
  26. 1.8

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on life cycle assessment and recycling - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk