Revision › Moles and masses › Worksheet
Moles and masses Hard
GCSE Chemistry · Quantitative Chemistry · Name ____________________ Date ________
Builds on: Standard form, Ratio notation and simplifying, Conservation of mass and formula mass
Do now
Quick questions on earlier topics - to get your brain going.
Using the relative formula mass method, calculate the percentage by mass of calcium in calcium oxide (CaO). Relative atomic masses: Ca=40, O=16. Give your answer to one decimal place. [1]
Multipliers written before chemical formulas in a balanced equation are called? [1]
- Reactants
- Coefficients
- Exponents
- Substitutions
Write 0.0489 as a number in standard form. [1]
Convert \(0.00456\) into standard form. [1]
Practice
Which pair of elements have relative formula masses that differ by less than 1 g mol⁻¹? [2]
- N & O.
- Fe & Co
- Na & Mg
- K & Ca
Calculate the number of moles in 25.0 g of calcium carbonate (CaCO₃). Relative formula mass is 100 g mol⁻¹. Give your answer to two decimal places. [2]
A chemist reacts 8 g of nitrogen gas with excess hydrogen gas in the Haber process (N₂ + 3H₂ → 2NH₃). What is the mass of ammonia produced? Give your answer to the nearest gram. [3]
Which of the following statements correctly describes a relationship between moles and mass? [2]
- Avogadro’s constant differs between elements.
- None of the above.
- One mole of water contains 6.02×10²³ molecules.
- The mass of one mole of water is 9 g.
When measuring the mass of a substance to determine its number of moles, which step is essential for accurate results? [2]
- Measure the volume instead.
- Use a balance with precision to 0.01 g.
- None of the above.
- Heat the sample until all water evaporates.
A sample of CO₂ has a mass of 4.48 g. What is the number of moles present? Give your answer to three significant figures. [2]
An unknown substance has a molar mass of 100 g mol⁻¹. A chemist dissolves 2.50 g of it in water and then evaporates the solution, leaving a solid residue that weighs 2.52 g. How many moles of the substance were originally present? Round to two significant figures. [2]
Which of the following statements is incorrect about molar mass? [1]
- The molar mass of NaCl is equal to its relative formula mass, approximately 58.5 g mol⁻¹.
- The molar mass of CO₂ is 44 g mol⁻¹.
- The molar mass can be used directly as the mass of one molecule.
- The molar mass of a compound equals the sum of atomic masses in grams per mole.
Tick one box on the definition of a mole. [1]
- A quantity that contains Avogadro’s constant entities of any type.
- The amount of matter needed to produce 1 mol of electrons in a reaction.
- The number of atoms in one gram of any element.
- The mass of a substance divided by its relative atomic mass.
Tick one box about safety when weighing a solid reactant for a laboratory experiment. [1]
- Use a pre‑tared weigh boat and tare it before adding the solid.
- Place the solid directly on the balance plate without any container, as this reduces error.
- Always use a plastic spoon to transfer the solid onto the balance.
- Weigh the solid at room temperature; no need to control temperature.
Which statement correctly describes a mole? [1]
- One mole of any substance contains 6.02 × 10²³ atoms.
- A mole is defined only for gases.
- The mass of one mole equals the atomic mass in grams for an element.
- One mole of a substance has the same number of entities as one mole of any other substance.
A sample of sodium chloride weighing 58.5 g is dissolved in water. Calculate the number of moles of NaCl present, showing two significant figures. [2]
Exam practice
Real past-paper questions on moles and masses, with their mark schemes, are in 4 Triangles - free to practise.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
The pH at the equivalence point of a strong acid–strong base titration is: [1]
- greater than 7
- less than 7
- exactly 7
- undefined
An unknown 1.20 M NaOH solution is titrated with 0.300 M HCl. If 25.00 mL of HCl are needed to reach the equivalence point, what was the volume (in mL) of the NaOH solution? [2]
(Titrations and solution concentration)Multiply \(2.5\times10^{-2}\) and \(4.8\times10^{4}\). Give your answer in standard form. [1]
(Standard form)Students often think that a high atom economy guarantees a high yield. Which of the following choices reflects this misconception? A) A reaction with an atom economy of 90 % will give at least 80 % yield. B) Atom economy measures the proportion of reactant atoms used to make product, not the efficiency of the reaction. C) Yield and atom economy are independent parameters; a low yield can still have high atom economy. D) The higher the atom economy, the more energy is required for the reaction. [1]
- B
- D
- C
- A
Which statement about atom economy is correct? A) Atom economy can never exceed 50 %. B) An atom economy of 100 % means all atoms of the reactants are incorporated into the desired product(s). C) The atom economy depends on the yield of the reaction. D) Atom economy is calculated by dividing the mass of the waste by the mass of all reactants. [1]
- D
- C
- A
- B
Add \(5.2\times10^{3}\) and \(1.8\times10^{4}\). Give your answer in standard form. [1]
(Standard form)
Still going? Unlimited questions on moles and masses, marked as you go: 4triangles.co.uk
💼 Where it leads: Quality control assistant · Pharmacy technician · Laboratory technician · Chemist - more
Stuck, or finished? Scan for help on moles and masses - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- 71.4
- B Coefficients
- 4.89×10^-2
- 4.56×10^-3
- D K & Ca
K (39.10) and Ca (40.08) differ by 0.98 g mol⁻¹, the only pair satisfying the criterion. - 0.25
- 10
Moles N₂ = 8 ÷ 28 = 0.2857 mol. This gives 2×0.2857 = 0.5714 mol NH₃. Mass = 0.5714 × 17 ≈ 9.71 g → 10 g. - C One mole of water contains 6.02×10²³ molecules.
Option A is correct – it states that a mole of any substance contains 6.02×10²³ entities, and the mass of a mole equals its relative formula mass. Option B gives an incorrect mass; option C incorrectly says Avogadro’s constant varies. - B Use a balance with precision to 0.01 g.
Accurate mass measurement requires a precise balance – option A. Options B and C are not essential for mole calculation from mass. - 0.102
Molar mass CO₂ = 44 g mol⁻¹. Moles = 4.48 ÷ 44 = 0.1018 → 0.102 mol. - 0.025
moles = mass ÷ molar mass = 2.50 g ÷ 100 g mol⁻¹ = 0.025 mol → 0.025 (two sf). - C The molar mass can be used directly as the mass of one molecule.
Molar mass refers to grams per mole; it is not the mass of a single molecule. Thus D is incorrect. - A A quantity that contains Avogadro’s constant entities of any type.
A mole is defined as the amount of substance that contains Avogadro's number of entities, regardless of type. - A Use a pre‑tared weigh boat and tare it before adding the solid.
The correct safety procedure is to use a pre‑tared weigh boat and tare the balance. - D One mole of a substance has the same number of entities as one mole of any other substance.
A and C are correct statements about moles. Only one option can be chosen, the most accurate is C. - 1
Use moles = mass ÷ relative formula mass. Relative formula mass of NaCl ≈ 23+35.45=58.45 g mol⁻¹. 58.5 g ÷ 58.45 g mol⁻¹ = 1.001 mol → 1.0 mol to two significant figures. - C exactly 7
- 6.25
- 1.2 × 10³
- D A
Choice A shows the misconception. - D B
Only B is true. - 2.32 × 10^4
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on moles and masses - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk