Revision › Polymers › Worksheet

Polymers Medium

GCSE Chemistry · Organic Chemistry · Name ____________________ Date ________

Builds on: Alkenes, alcohols, acids and esters, Carbon: diamond, graphite and graphene, Crude oil, hydrocarbons and fuels

Do now

Quick questions on earlier topics - to get your brain going.

  1. Name the first member of the alkene homologous series. [1]

  2. Tick one box about a required safety measure when hydrogen gas is bubbled into ethene in a test tube at low pressure. A) The reaction must be carried out under water cover to avoid flame spread. B) The reaction vessel must be connected to a vacuum line. C) Use a closed system and ensure no open flames are nearby. D) The reaction should be performed in the dark because ethene is photolabile. [1]

    1. B
    2. C
    3. A
    4. D
  3. In a sheet of graphene there are 15 carbon atoms per square centimetre. How many delocalised electrons are present in each square centimetre? [1]

  4. A Buckminsterfullerene molecule (C₆₀) contains 60 carbon atoms. Assuming each atom contributes one delocalised electron, how many electrons are available in total? [1]

Practice

  1. If the degree of polymerisation for a batch of polyethylene glycol (repeat unit mass 44 g mol⁻¹) is 100, what is its average molecular weight? Give your answer in g mol⁻¹. [1]

  2. Monomer X has the functional groups –OH and –COOH. When it reacts with itself by condensation polymerisation, what type of polymer is formed? [1]

    1. ☐ Protein
    2. ☐ DNA
    3. ☐ Addition polymer
    4. ☐ Condensation polymer
  3. A sample of poly(vinyl alcohol) has an average molecular weight of 48 000 g mol⁻¹. The mass of one repeating unit is 44 g mol⁻¹. How many repeating units are there on average in each chain? Provide your answer as a whole number. [1]

  4. An ethene monomer has a molar mass of 28 g mol⁻¹. It is polymerised to give polyethylene that has an average molecular weight of 14 000 g mol⁻¹. How many repeating units are there in each chain on average? Round to the nearest whole number. [1]

  5. 50 mol of ethene (CH₂=CH₂) reacts completely by addition polymerisation to give a polymer whose average molecular weight is 5 000 g mol⁻¹. What is the degree of polymerisation of the polymer, rounded to the nearest whole number? [2]

  6. During the condensation polymerisation of ethylene glycol (HO‑CH₂CH₂‑OH) with hexanedioic acid (HOOC‑(CH₂)₄‑COOH), which small molecule is typically released? [1]

    1. ☐ H₂O
    2. ☐ O₂
    3. ☐ CH₄
    4. ☐ CO₂
  7. Glycine forms what type of polymer during condensation polymerisation? [1]

  8. Which naturally occurring polysaccharide polymer is built from glucose units? [1]

  9. What small molecule is typically released when two di‑functional monomers undergo condensation polymerisation? [1]

  10. Which functional group in a monomer indicates it can undergo addition polymerisation? [1]

  11. In a laboratory experiment where ethene gas is polymerised to make polyethylene using a radical initiator, which of the following precautions should be taken? A) Keep the reaction vessel open to air. B) Use a closed system with ventilation. C) Add water to cool the exotherm. D) Avoid any protective eyewear. [1]

    1. D
    2. C
    3. A
    4. B
  12. If 5.0 g of ethene monomer is used and the molar mass of ethene is 28.05 g mol⁻¹, how many moles of ethene were used? Round to two decimal places. [1]

Stretch

A step up - try these if you finish.

  1. A sample of ethylene glycol weighing 200 g reacts completely with excess oxalic acid to form a polyester. How many millimoles of water are produced? (Molar mass of ethylene glycol = 62 g mol⁻¹). Give your answer to the nearest whole number. [2]

  2. Which type of polymerisation occurs when ethene (CH₂=CH₂) is converted to poly(ethene)? [1]

    1. DNA synthesis
    2. Condensation polymerisation
    3. Protein synthesis
    4. Addition polymerisation
  3. A 3 g sample of poly(ethylene terephthalate) has a density of 1.38 g cm⁻³. What is its volume in cubic centimetres? Round your answer to two decimal places. [2]

  4. When performing a polymerisation that requires heating an alkene under pressure, which of the following safety measures is most important? [2]

    1. Using a fume hood to vent any gases
    2. Maintaining a 10 cm distance between the operator and the reaction vessel
    3. Keeping a fire extinguisher within arm’s reach
    4. Ensuring all metal equipment is non‑reactive to prevent spark generation

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which statement about graphite is false? [1]

    1. It can act as a dry lubricant because layers slide easily.
    2. Delocalised electrons give it metallic conductivity within layers.
    3. The layers are bonded by strong covalent forces making it hard.
    4. Each carbon atom forms three covalent bonds in a plane.
    (Carbon: diamond, graphite and graphene)
  2. Which fraction of crude oil would most likely be used to produce petrol in a refinery? [1]

    1. Heavy oils (C₂₁ and above)
    2. Gases (C₁–C₄)
    3. Light oils (C₅–C₁₂)
    4. Middle distillates (C₁₃–C₂₀)
    (Crude oil, hydrocarbons and fuels)
  3. Which statement about boiling points of alkanes is correct? [1]

    1. Boiling point first increases then decreases.
    2. Boiling point increases as the number of carbon atoms increases.
    3. Boiling point decreases as the number of carbon atoms increases.
    4. Boiling point remains constant for all alkanes.
    (Crude oil, hydrocarbons and fuels)
  4. A new material has carbon atoms arranged in a tetrahedral network similar to diamond but with some vacancies. Which property will it most likely have compared to pure diamond? [1]

    1. Increased thermal expansion.
    2. Lower melting point.
    3. Greater electrical conductivity.
    4. Higher hardness.
    (Carbon: diamond, graphite and graphene)
  5. When carrying out the addition of hydrogen chloride to an alkene in a laboratory, which of the following safety measures should be observed? [1]

    1. Keep the reactants cold at all times
    2. Use a tightly capped flask to prevent gas escape
    3. Conduct the reaction inside a fume hood
    4. Avoid using any light source
    (Alkenes, alcohols, acids and esters)
  6. An alkene has 7 carbon atoms. Using the general formula for alkenes, how many hydrogen atoms does it contain? [1]

    (Alkenes, alcohols, acids and esters)

💼 Where it leads: Chemical plant process operator · Materials technician · Chemical engineering technician · Chemist - more

Stuck, or finished? Scan for help on polymers - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. ethene
  2. B C
  3. 15
  4. 60
  5. 4400
  6. D ☐ Condensation polymer
  7. 1091
    n = 48000 / 44 ≈ 1090.909 → nearest whole number = 1091.
  8. 500
    Average Molecular Weight = n × Monomer Mass → n=14000/28=500.
  9. 179
  10. A ☐ H₂O
  11. polypeptide
  12. starch
  13. water
  14. C=C
  15. D B
    Safety requires an enclosed, ventilated set‑up and eye protection.
  16. 0.18
    moles = mass / molar mass = 5.0 / 28.05 ≈ 0.1787
  17. 3226
    moles H₂O = 200 g ÷ 62 g mol⁻¹ ≈ 3.226 mol = 3226 mmol
  18. D Addition polymerisation
  19. 2.17
    V = m ÷ d = 3 g ÷ 1.38 g cm⁻³ ≈ 2.17 cm³
  20. D Ensuring all metal equipment is non‑reactive to prevent spark generation
  21. C The layers are bonded by strong covalent forces making it hard.
  22. C Light oils (C₅–C₁₂)
    Petrol is derived from the light‑oil fraction.
  23. B Boiling point increases as the number of carbon atoms increases.
    Boiling points rise with chain length due to greater London dispersion forces.
  24. B Lower melting point.
  25. C Conduct the reaction inside a fume hood
    The reaction produces flammable gases; ventilation is essential.
  26. 14

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on polymers - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk