Revision › Resources and potable water › Worksheet

Resources and potable water Easy

GCSE Chemistry · Using Resources · Name ____________________ Date ________

Builds on: Reactivity, extraction, oxidation and reduction

Do now

Quick questions on earlier topics - to get your brain going.

  1. Which element is commonly added to metal oxides to extract the metal by reduction? [1]

  2. What term describes a reaction where oxygen is lost? [1]

Practice

  1. In sewage treatment, which step separates solids from liquids by settling? [1]

  2. Which of the following safety steps should be taken before distilling a water sample in the laboratory? (a) Verify that the reflux condenser is securely fixed. (b) Add more solvent to increase pressure. (c) Open the lid during heating. (d) Use an unsealed glassware. [1]

    1. (a) Verify that the reflux condenser is securely fixed.
    2. (d) Use an unsealed glassware.
    3. (b) Add more solvent to increase pressure.
    4. (c) Open the lid during heating.
  3. A domestic tap delivers 3.5 L of water every minute. How many litres does it deliver in 60 minutes? Give the answer to the nearest litre. [1]

  4. Which statement is a common misconception about potable water sources? (a) Groundwater needs no treatment before drinking. (b) Seawater can be made drinkable by desalination. (c) Tap water is generally safe to drink after treatment. (d) Water containing dissolved salts cannot be safely drunk. [1]

    1. (d) Water containing dissolved salts cannot be safely drank.
    2. (c) Tap water is generally safe to drink after treatment.
    3. (b) Seawater can be made drinkable by desalination.
    4. (a) Groundwater needs no treatment before drinking.
  5. During anaerobic digestion in sewage treatment, which waste product is produced before aerobic treatment? [1]

  6. If a new neighbourhood uses rainwater harvesting, which of the following steps should it include to make the water potable? (a) Add chlorine and filter (b) Boil only (c) Directly drink from the tank (d) Use untreated seawater [1]

    1. (c) Directly drink from the tank
    2. (b) Boil only
    3. (d) Use untreated seawater
    4. (a) Add chlorine and filter
  7. A water sample contains 200 mg/L of dissolved solids. Convert this concentration to parts per million (ppm). [1]

  8. What biological method uses plants to extract copper from ore? [1]

  9. What is the term for development that meets present needs without compromising future generations? [1]

  10. Which of the following is a finite resource? (a) Wind (b) Solar energy (c) Crude oil (d) Water [1]

    1. (a) Wind
    2. (d) Water
    3. (b) Solar energy
    4. (c) Crude oil

Stretch

A step up - try these if you finish.

  1. A desalination plant produces 2000 L of potable water per day from sea water with an average salinity of 3.5 %. Assume the density of sea water is 1000 kg m⁻³. Calculate the mass of salt removed each day, to the nearest kilogram. [1]

  2. How many cubic metres of water does a family of 5 consume in one week if the average daily consumption is 180 L per person? [2]

  3. A reverse osmosis plant draws sea water at \(55\text{ bar}\) to produce potable water. If the feed volume is 1000 L per day and system efficiency is 50 %, calculate the minimum amount of electrical work (in kWh) required per day, given that \(1\,\text{kWh}\) supplies \(3.6\times10^{6}\,\text{J}\). Use \(W=P V\) with pressure in Pa and volume in m³. [2]

  4. When treating greywater for reuse in a household, which of the following is the most appropriate first step? A) Add chlorine disinfectant directly to the water. B) Pass the water through a sand filter. C) Adjust the pH to 7.0 using lime. D) Boil the water for 5 minutes. [1]

    1. C
    2. A
    3. B
    4. D

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Tick one box about a required practical or safety measure: During laboratory electrolysis of molten NaCl, which precaution is essential? [1]

    1. ☐ Keep a ventilation hood over the apparatus
    2. ☐ Use a fire extinguisher rated for electrical fires
    3. ☐ Do not use inert gas atmosphere
    4. ☐ Wear protective gloves when handling the electrodes
    (Electrolysis)
  2. Which of the following stages is NOT typically included in a life cycle assessment? [1]

    1. a) Extraction and processing of raw materials
    2. b) Manufacturing and packaging
    3. d) The colour of the product
    4. c) Use and operation during its lifetime
    (Life cycle assessment and recycling)
  3. Tick one box comparing two things: Which electrode material can be used without being consumed during electrolysis of molten salts? [1]

    1. ☐ Aluminium cathode
    2. ☐ Carbon anode
    3. ☐ Graphite
    4. ☐ Steel anode
    (Electrolysis)
  4. A 0.5 mol sample of magnesium metal reacts with excess oxygen to give magnesium oxide, MgO. What mass of MgO is produced? (Mg = 24.3 g·mol⁻¹, O = 16.0 g·mol⁻¹). Give your answer in grams to two decimal places. [1]

    (Reactivity, extraction, oxidation and reduction)
  5. Which non‑metal is usually placed at the top of the reactivity series? [1]

    (Reactivity, extraction, oxidation and reduction)
  6. Which of these materials generally has a higher recycling rate? [1]

    1. c) Both are equal
    2. a) Plastic bags
    3. d) None can be recycled
    4. b) Paper bags
    (Life cycle assessment and recycling)

💼 Where it leads: Recycling operative · Water network operative · Recycling officer · Climate scientist - more

Stuck, or finished? Scan for help on resources and potable water - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. carbon
  2. reduction
  3. Sedimentation
  4. A (a) Verify that the reflux condenser is securely fixed.
  5. 210
  6. D (a) Groundwater needs no treatment before drinking.
  7. Sludge
  8. D (a) Add chlorine and filter
  9. 200
    The concentration is already in mg L⁻¹, which equals ppm for dilute aqueous solutions.
  10. Phytomining
  11. Sustainable development
  12. D (c) Crude oil
  13. 70
    First convert 2000 L to cubic metres: 2000 L = 2.0 m³. Mass of seawater = volume × density = 2.0 m³ × 1000 kg m⁻³ = 2000 kg. Salt mass = 3.5 % of 2000 kg = 0.035 × 2000 kg = 70 kg. Rounded to the nearest kilogram, answer is 70 kg.
  14. 6.3
  15. 3.1
  16. C B
    Greywater typically contains suspended solids and organic matter; a sand filter removes these before further treatment, so option B is correct. No other option is a standard first step in greywater treatment. The answer should be given as the letter of the correct option.
  17. A ☐ Keep a ventilation hood over the apparatus
  18. C d) The colour of the product
    LCAs cover extraction, manufacturing, use, and disposal – colour is not a stage.
  19. C ☐ Graphite
  20. 20.15
  21. hydrogen
  22. D b) Paper bags
    Paper is usually recycled at a higher rate than plastic bags.

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on resources and potable water - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk