Revision › Resources and potable water › Worksheet
Resources and potable water Medium
GCSE Chemistry · Using Resources · Name ____________________ Date ________
Builds on: Reactivity, extraction, oxidation and reduction
Do now
Quick questions on earlier topics - to get your brain going.
Which element is commonly added to metal oxides to extract the metal by reduction? [1]
What term describes a reaction where oxygen is lost? [1]
Practice
A desalination plant produces 2000 L of potable water per day from sea water with an average salinity of 3.5 %. Assume the density of sea water is 1000 kg m⁻³. Calculate the mass of salt removed each day, to the nearest kilogram. [1]
How many cubic metres of water does a family of 5 consume in one week if the average daily consumption is 180 L per person? [2]
A reverse osmosis plant draws sea water at \(55\text{ bar}\) to produce potable water. If the feed volume is 1000 L per day and system efficiency is 50 %, calculate the minimum amount of electrical work (in kWh) required per day, given that \(1\,\text{kWh}\) supplies \(3.6\times10^{6}\,\text{J}\). Use \(W=P V\) with pressure in Pa and volume in m³. [2]
When treating greywater for reuse in a household, which of the following is the most appropriate first step? A) Add chlorine disinfectant directly to the water. B) Pass the water through a sand filter. C) Adjust the pH to 7.0 using lime. D) Boil the water for 5 minutes. [1]
- C
- A
- B
- D
Which statement best describes how the treatment of groundwater differs from the treatment of seawater? A) Groundwater requires desalination, whereas seawater is filtered. B) Seawater needs to be boiled before use, while groundwater can be consumed directly. C) Groundwater generally undergoes sedimentation and disinfection; seawater must first have its salt removed by a membrane or distillation process. D) Both groundwater and seawater are treated in the same way because they are both freshwater sources. [1]
- D
- C
- B
- A
In sewage treatment, which step separates solids from liquids by settling? [1]
Which of the following safety steps should be taken before distilling a water sample in the laboratory? (a) Verify that the reflux condenser is securely fixed. (b) Add more solvent to increase pressure. (c) Open the lid during heating. (d) Use an unsealed glassware. [1]
- (a) Verify that the reflux condenser is securely fixed.
- (d) Use an unsealed glassware.
- (b) Add more solvent to increase pressure.
- (c) Open the lid during heating.
A domestic tap delivers 3.5 L of water every minute. How many litres does it deliver in 60 minutes? Give the answer to the nearest litre. [1]
Which statement is a common misconception about potable water sources? (a) Groundwater needs no treatment before drinking. (b) Seawater can be made drinkable by desalination. (c) Tap water is generally safe to drink after treatment. (d) Water containing dissolved salts cannot be safely drunk. [1]
- (d) Water containing dissolved salts cannot be safely drank.
- (c) Tap water is generally safe to drink after treatment.
- (b) Seawater can be made drinkable by desalination.
- (a) Groundwater needs no treatment before drinking.
During anaerobic digestion in sewage treatment, which waste product is produced before aerobic treatment? [1]
If a new neighbourhood uses rainwater harvesting, which of the following steps should it include to make the water potable? (a) Add chlorine and filter (b) Boil only (c) Directly drink from the tank (d) Use untreated seawater [1]
- (c) Directly drink from the tank
- (b) Boil only
- (d) Use untreated seawater
- (a) Add chlorine and filter
A water sample contains 200 mg/L of dissolved solids. Convert this concentration to parts per million (ppm). [1]
Stretch
A step up - try these if you finish.
Which statement best explains why reverse osmosis requires more energy than simple distillation when treating seawater? A) Reverse osmosis uses high‑pressure pumps that consume electricity. B) Distillation can be performed using solar heat, whereas reverse osmosis cannot. C) Reverse osmosis concentrates salts on the feed side, while distillation removes them completely. D) Distillation must be carried out in a vacuum, increasing energy use. [1]
- B
- D
- A
- C
Which of the following is essential when preparing a fresh water sample for an accurate pH measurement in a laboratory? A) Use a glass pipette and avoid touching the electrode with hands. B) Rinse the electrode with distilled water before each use. C) Store the sample in a plastic bottle for at least 24 h before testing. D) Add a small amount of acid to neutralise any carbonate ions. [1]
- D
- B
- A
- C
What statement below reflects a common misconception about potable water and pure water? A. Potable water must be free of all dissolved solids. B. Pure water is the same as potable water. C. Potable water can contain dissolved salts but in low concentrations. D. Both potable and pure water are completely clean. (Tick one box.) [1]
- D. Both potable and pure water are completely clean.
- C. Potable water can contain dissolved salts but in low concentrations.
- B. Pure water is the same as potable water.
- A. Potable water must be free of all dissolved solids.
A water treatment plant requires that the free‑chlorine concentration in potable tap water be less than 0.5 mg L⁻¹. A household uses 50 L of tap water per day and the chlorine level is measured at 0.4 mg L⁻¹. What total amount of free‑chlorine, in milligrams, does the household receive each day? (Give your answer to the nearest whole number). [2]
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
Which of the following best describes Life Cycle Assessment? A) A method for measuring a product’s energy consumption only during use. B) A tool that quantifies all environmental impacts from raw material extraction to disposal. C) A technique used solely by manufacturers to improve product design. D) A statistical analysis of consumer purchasing behaviour. [1]
- C
- A
- D
- B
Which metal reacts faster with dilute acids at room temperature, zinc or iron? [1]
- Zinc
- Neither reacts
- Both react at the same speed
- Iron
Which stage of a life cycle assessment includes waste disposal and transport at the end of its useful life? A. Extracting and processing raw materials B. Manufacturing and packaging C. Use and operation during its lifetime D. Disposal at the end of its useful life, including transport [1]
- A
- C
- B
- D
Which of the following metals will NOT react with a dilute solution of hydrochloric acid at room temperature? [1]
- Iron
- Copper
- Zinc
- Magnesium
During the electrolysis of an aqueous solution of MgSO₄ with inert electrodes, which gas evolves at the cathode? (Tick one box) [1]
- H₂ gas
- SO₄²⁻ ion
- Mg metal
- O₂ gas
In the electrolysis of molten aluminium chloride the half‑reaction at the cathode is 6e⁻ + 2Al³⁺ → 2Al. If 5.4 mol of electrons are supplied to the cathode, how many moles of aluminium metal are produced? (Give answer to two decimal places). [1]
(Electrolysis)
Still going? Unlimited questions on resources and potable water, marked as you go: 4triangles.co.uk
💼 Where it leads: Recycling operative · Water network operative · Recycling officer · Climate scientist - more
Stuck, or finished? Scan for help on resources and potable water - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- carbon
- reduction
- 70
First convert 2000 L to cubic metres: 2000 L = 2.0 m³. Mass of seawater = volume × density = 2.0 m³ × 1000 kg m⁻³ = 2000 kg. Salt mass = 3.5 % of 2000 kg = 0.035 × 2000 kg = 70 kg. Rounded to the nearest kilogram, answer is 70 kg. - 6.3
- 3.1
- C B
Greywater typically contains suspended solids and organic matter; a sand filter removes these before further treatment, so option B is correct. No other option is a standard first step in greywater treatment. The answer should be given as the letter of the correct option. - B C
Groundwater is already fresh but may contain microbes, so it typically requires sedimentation (or filtration) followed by disinfection. Seawater contains high concentrations of salt, which must first be removed by desalination (membrane or distillation) before any further treatment. Option C correctly contrasts the two. - Sedimentation
- A (a) Verify that the reflux condenser is securely fixed.
- 210
- D (a) Groundwater needs no treatment before drinking.
- Sludge
- D (a) Add chlorine and filter
- 200
The concentration is already in mg L⁻¹, which equals ppm for dilute aqueous solutions. - C A
- B B
- C B. Pure water is the same as potable water.
The specification requires students to distinguish between *potable* and *pure* water. The most frequent misunderstanding is that these two terms refer to the same thing, i.e. that pure water is itself potable. Therefore option **B** is the statement that reflects this common misconception. … - 20
\(0.4\,\text{mg L}^{-1}\times 50\,\text{L}=20\,\text{mg}\) - D B
LCA covers entire life cycle. - A Zinc
- D D
- B Copper
- A H₂ gas
- 1.8
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on resources and potable water - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk