Revision › Tests for ions and instrumental analysis › Worksheet

Tests for ions and instrumental analysis Medium

GCSE Chemistry · Chemical Analysis · Name ____________________ Date ________

Builds on: Purity, formulations and chromatography, Tests for gases

Do now

Quick questions on earlier topics - to get your brain going.

  1. Which of the following statements is true for a pure substance? [1]

    1. It has a range of melting points
    2. It boils at two different temperatures
    3. Its boiling point is a single, fixed temperature
    4. Its density changes with pressure
  2. Which of the following is a more reliable method for determining purity of a substance? [1]

    1. Observing colour of the sample
    2. Measuring its melting point and checking against literature values
    3. Counting the number of spots in a chromatogram
    4. Recording its taste
  3. Which of the following is required before testing a gas for hydrogen? [1]

    1. ☐ limewater
    2. ☐ glowing splint
    3. ☐ burning splint
    4. ☐ litmus paper
  4. What color change occurs to damp litmus paper when it comes into contact with chlorine gas? [1]

Practice

  1. When performing the silver nitrate test for halides, why should dilute nitric acid be added to the solution before adding silver nitrate? [1]

    1. To oxidise chloride ions
    2. To dissolve any metal hydroxides present
    3. To reduce Ag⁺ ions to metallic silver
    4. To keep the solution acidic and prevent Ag₂O precipitation
  2. A 25.0‑mL aqueous solution contains 0.0200 mol of Ca²⁺ ions. How many millilitres (to one decimal place) of a 1.00 M NaOH solution are required to precipitate all the calcium as Ca(OH)₂? [2]

  3. Which statement correctly compares flame tests with instrumental methods for ion detection? [1]

    1. Flame tests can detect all ions, whereas instrumental methods are limited to metals
    2. Both methods have the same precision
    3. Flame tests give quantitative results while instrumental methods only qualitative
    4. Instrumental methods are more sensitive and rapid than flame tests
  4. A 0.100 M copper(II) sulfate solution is treated with excess sodium hydroxide. Which colour will be observed for the precipitate? [1]

    1. Green
    2. Colourless
    3. Yellow
    4. Blue
  5. An unknown aqueous solution contains only Fe²⁺ and Cl⁻ ions. If sodium hydroxide is added, which of the following will be observed? [1]

    1. A brown precipitate forms
    2. A red precipitate forms
    3. No precipitate forms
    4. A green precipitate forms
  6. Which metal ion gives a lilac coloured flame in a flame test? [1]

    1. Potassium
    2. Lithium
    3. Sodium
    4. Calcium
  7. Which colour is produced in a flame test when lithium ions are present? [1]

    1. Yellow
    2. Crimson
    3. Green
    4. Lilac
  8. What reagent gives a white precipitate with sulfate ions in acidic solution? [1]

  9. When performing the sodium hydroxide test for calcium ions, which precaution is necessary? [1]

    1. Add acid after precipitate forms
    2. Use a hot plate to accelerate the reaction
    3. Keep flame away from the solution
    4. Wear gloves
  10. A sample contains both sodium and potassium ions. When it is burnt in a flame the colour observed will most likely be: [1]

    1. Green
    2. Orange‑red
    3. Yellow
    4. Lilac
  11. A 0.050 M calcium chloride solution is used. How many millilitres of this solution are required to provide 0.020 moles of calcium ions for precipitation as Ca(OH)₂? [1]

  12. Which metal ion’s hydroxide dissolves in excess sodium hydroxide after precipitating? [1]

Stretch

A step up - try these if you finish.

  1. When 0.1 M NaOH is added to a solution containing Mg²⁺ and Al³⁺, which of the following occurs? [2]

    1. B) Only Mg(OH)₂ forms a white precipitate; Al(OH)₃ dissolves in excess NaOH
    2. D) No reaction occurs
    3. C) Both dissolve forming soluble hydroxides
    4. A) Both form white precipitates that remain solid
  2. A student mixes 0.05 M AgNO₃ with an aqueous solution that contains both chloride and iodide ions. Which colour precipitate is observed? [2]

    1. C) Yellow
    2. A) White
    3. B) Cream
    4. D) No precipitate
  3. Which safety precaution should be taken before conducting a flame test on a sample that may contain copper ions? [2]

    1. D) Keep the work area well ventilated and wear safety goggles
    2. B) Cover the flame with a cloth to avoid splashing
    3. C) Place a piece of paper behind the burner to catch debris
    4. A) Heat the metal rod to 300 °C
  4. A sample weighing 50 g contains 2.0 mmol of chloride ions. What is the mass percentage of chloride in the sample? Give your answer to two decimal places. [2]

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which statement best distinguishes a pure substance from an impure mixture using melting point data? [1]

    1. A pure substance melts at the same temperature in all conditions; an impure sample will not melt.
    2. A pure substance has a single, sharp melting point; an impurity gives a higher melting point.
    3. A pure substance has a single, narrow melting point; an impure sample shows a broader range or depressed temperature.
    4. A pure substance shows a range of temperatures; an impurity has a precise temperature.
    (Purity, formulations and chromatography)
  2. Which of the following statements is correct regarding a pure substance? [1]

    1. All its molecules have identical composition.
    2. It melts at a single temperature only when heated in vacuum.
    3. Its boiling point can be lowered by adding another liquid.
    4. It contains more than one element or compound.
    (Purity, formulations and chromatography)
  3. Which of the following statements correctly compares the tests for hydrogen and oxygen? [1]

    1. ␣A) Both tests use a burning splint that gives a pop sound
    2. ␣D) The hydrogen test uses a burning splint giving a pop, while the oxygen test uses a glowing splint that relights
    3. ␣B) The hydrogen test requires a glowing splint to relight
    4. ␣C) The oxygen test uses a burning splint that gives a pop sound
    (Tests for gases)
  4. When testing for hydrogen, which of the following would NOT be a correct observation? [1]

    1. ␣C) The splint continues to burn after the reaction
    2. ␣B) The gas immediately disappears when lit
    3. ␣D) There is no fire but a sharp popping noise
    4. ␣A) A burning splint gives a pop sound
    (Tests for gases)

💼 Where it leads: Quality control assistant · Water treatment worker · Laboratory technician · Forensic scientist - more

Stuck, or finished? Scan for help on tests for ions and instrumental analysis - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. C Its boiling point is a single, fixed temperature
  2. B Measuring its melting point and checking against literature values
  3. C ☐ burning splint
  4. White
  5. D To keep the solution acidic and prevent Ag₂O precipitation
    Dilute acid keeps the medium sufficiently acidic so that only halide‑silver precipitates form.
  6. 40
    Ca²⁺ + 2 OH⁻ → Ca(OH)₂(s) moles OH⁻ needed = 0.0200×2=0.0400 mol volume NaOH = 0.0400 mol ÷ 1.00 M = 0.0400 L = 40.0 mL
  7. D Instrumental methods are more sensitive and rapid than flame tests
    Instrumental techniques (e.g. spectroscopy) are generally faster, more accurate and detect lower concentrations.
  8. D Blue
    Cu²⁺ + 2OH⁻ → Cu(OH)₂ (blue).
  9. D A green precipitate forms
    Fe²⁺ + 2OH⁻ → Fe(OH)₂ (green).
  10. A Potassium
    Flame tests produce characteristic colours: lithium = crimson, sodium = yellow, potassium = lilac, calcium = orange‑red.
  11. B Crimson
  12. Barium chloride
  13. D Wear gloves
  14. C Yellow
  15. 400
  16. Aluminium
  17. A B) Only Mg(OH)₂ forms a white precipitate; Al(OH)₃ dissolves in excess NaOH
  18. A C) Yellow
  19. A D) Keep the work area well ventilated and wear safety goggles
  20. 0.14
    Mass Cl = (2×10⁻³ mol) × 35.45 g·mol⁻¹ = 0.0709 g. %Cl = (0.0709 ÷ 50)×100 = 0.1418 % ≈0.14 %.
  21. C A pure substance has a single, narrow melting point; an impure sample shows a broader range or depressed temperature.
    Impurities broaden or lower MP; D reflects this.
  22. A All its molecules have identical composition.
    Pure substances have identical molecular composition; thus D is correct.
  23. B ␣D) The hydrogen test uses a burning splint giving a pop, while the oxygen test uses a glowing splint that relights
  24. A ␣C) The splint continues to burn after the reaction

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on tests for ions and instrumental analysis - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk