Revision › GCSE Chemistry › Chemical Analysis

Tests for ions and instrumental analysis

GCSE Chemistry · Chemical Analysis. Explained 3 ways - start with the one that suits you.

Tests for ions and instrumental analysis Start here

Know the key chemical tests to identify ions and why instruments are useful.

Key words

flame test
Put a sample in flame, observe colour.
hydroxide precipitate
Solid that forms when metal ion reacts with OH⁻.
carbonate
Compound containing CO₃²⁻ that releases CO₂ with acid.
halide
Cl⁻, Br⁻ or I⁻ ions.

Key points

  • Flame tests give colours: Na yellow; Li crimson; K lilac; Ca orange‑red; Cu green.
  • NaOH with Al³⁺, Ca²⁺, Mg²⁺ gives white precipitate; only Al dissolves in excess.
  • Acid + carbonate releases CO₂, milky limewater; AgNO₃+acid gives white/cream/yellow halides; BaCl₂+acid gives white BaSO₄.
  • Instrumental methods are faster, more sensitive and quantitative compared with chemical tests.

Watch out for

  • Remember to keep the test neat.
  • Try both chemical and instrumental methods.

Remember: Always note the brightest colour in mixtures.

Tests for ions and instrumental analysis Core

This revision guide covers the GCSE skills needed to identify common metal cations using chemical tests and an overview of instrumental methods.

Key words

flame test
Heat a sample in a flame; metal ions emit characteristic colours.
precipitate
Solid that forms when two solutions are mixed.
carbonate
An ion that gives CO₂ on acid attack.
halide
Cl⁻, Br⁻ or I⁻.

Key points

  • Flame tests give distinct colours for Li⁺ (crimson), Na⁺ (yellow), K⁺ (lilac), Ca²⁺ (orange‑red) and Cu²⁺ (green).
  • If more than one ion is present, the brightest flame colour can mask a weaker one.
  • Add sodium hydroxide to solutions of Al³⁺, Ca²⁺ or Mg²⁺: all give white precipitates; only Al(OH)₃ dissolves when excess NaOH is added.
  • With NaOH, Cu²⁺ gives blue Cu(OH)₂↓, Fe²⁺ gives green Fe(OH)₂↓ and Fe³⁺ gives brown Fe(OH)₃↓.
  • Carbonates react with dilute acid to give CO₂; the gas turns limewater milky.
  • In acidic solution AgNO₃ precipitates halides: AgCl (white), AgBr (cream‑yellow) and AgI (yellow). The same acidity allows BaCl₂ to give a white BaSO₄ precipitate from SO₄²⁻.

Watch out for

  • In mixed samples the brighter colour can hide weaker ones, so be careful when interpreting results.

Remember: Instrumental methods (e.g. flame emission spectroscopy) are faster and more sensitive than these qualitative tests, and they also give quantitative data.

Tests for ions and instrumental analysis Stretch

You need quick, reliable ways to say what ions are hiding in a solution. The methods below give you the essential clues, highlight common pitfalls and link each test to other GCSE topics.

Key words

flame colours
crimson Li⁺, yellow Na⁺, lilac K⁺, orange‑red Ca²⁺, green Cu²⁺
precipitation
white Al³⁺/Ca²⁺/Mg²⁺; blue Cu²⁺; green Fe²⁺; brown Fe³⁺
lithium aluminate
only dissolves in excess NaOH, but you need not write its equation

Key points

  • Flame test colours reveal Li⁺, Na⁺, K⁺, Ca²⁺ and Cu²⁺; use a clean platinum or nichrome wire to avoid contamination.
  • If several ions are present the brightest flame colour can mask a weaker one – check each ion separately when possible.
  • Add sodium hydroxide: white precipitates mean Al³⁺/Ca²⁺/Mg²⁺; only Al(OH)₃ dissolves further in excess NaOH, so Al³⁺ is identified.
  • For Cu²⁺, Fe²⁺ and Fe³⁺ use NaOH to give blue Cu(OH)₂, green Fe(OH)₂ and brown Fe(OH)₃ respectively; the colour of the precipitate tells you which ion is present.
  • Treat a carbonate with dilute acid – CO₂ bubbles out; limewater turns milky when it reacts with CO₂. This confirms a carbonate ion.
  • In acidic solution add AgNO₃: white AgCl, cream‑yellow AgBr, yellow AgI form. The precipitate colour tells you which halide is present.

Watch out for

  • If you use a dirty wire you may see extra colours that mask the true result.
  • In mixed‑ion samples remember that the strongest colour will dominate; repeat each test with isolated ions if possible.
  • The chemical tests are qualitative – they confirm presence but not amount. Instrumental methods like flame emission spectroscopy give quantitative data and avoid interference.

Remember: Instrumental techniques are faster, more sensitive and can quantify concentrations, unlike the visual or colour‑based chemical tests.

✏️ Try 3 quick questions

  1. Which colour is produced in a flame test when lithium ions are present?

  2. When performing the silver nitrate test for halides, why should dilute nitric acid be added to the solution before adding silver nitrate?

  3. When 0.1 M NaOH is added to a solution containing Mg²⁺ and Al³⁺, which of the following occurs?

Practise it with real exam questions

4 Triangles has quick questions on tests for ions and instrumental analysis, real GCSE past-paper questions with their mark schemes, and a revision plan that picks what to work on next.

Try the quick questions

📝 Worksheets and a knowledge organiser to print

Questions on this topic for a lesson, homework or revision - a quick "do now", misconception questions, small steps that change one thing at a time, and practice, with answers on the last page.

Easy Medium Hard 📄 Knowledge organiser

🔤 Key words to know

Ion
An ion is an atom or group of atoms with a positive or negative charge due to the loss or gain of electrons.
Precipitate
An insoluble solid formed when two solutions react together.
Cation
A positively charged ion.
Anion
A negatively charged ion.
Flame test
A test where a chemical put into a flame produces a characteristic colour (tests for metal ions).
Spectroscope
An instrument that separates light into its component wavelengths.
Concentration
The amount of a solute dissolved in a certain volume of solvent.
Calibration curve
A graph used to determine the concentration of a substance in a sample.
Balanced equation
This describes a reaction using a symbol equation with coefficients which ensure there are equal numbers of atoms of each element on both sides of the symbol equation.
State symbol
These are used in chemical equations to indicate the physical state of a substance.

Many definitions from Oak National Academy (Open Government Licence).

When it's usually taught: Year 11 - Chemical analysis.

💼 Where it could take you

Jobs where people use this every day - whichever way you go after school.

Straight from school or an apprenticeship

With college or an advanced apprenticeship

With a degree

Each job opens its National Careers Service profile: what it pays, the hours, and how to get in.

📺 Watch a lesson on this

Each is a science lesson by Oak National Academy licensed under Open Government Licence (OGL). Lessons open on Oak National Academy's site.

More on Chemical Analysis