Revision › GCSE Chemistry › Atomic Structure & the Periodic Table

Transition metals

GCSE Chemistry · Atomic Structure & the Periodic Table. Explained 3 ways - start with the one that suits you.

Transition metals Start here

This gives the most important points you need to remember.

Key words

transition
metals that can give several different ion charges
oxidation
loss of electrons

Key points

  • Melting points of transition metals are very high, unlike low-melting Group 1 metals.
  • They are dense, strong and hard compared with soft alkali metals.
  • Transition metals react slowly with oxygen and water; Group 1 reacts instantly.
  • Many form ions of several charges, colourful compounds, and act as catalysts.

Watch out for

  • Use plain words.

Remember: Only use the facts listed above. No extra details.

Transition metals Core

The key differences and typical properties of transition metals compared with the alkali metals are summarised below.

Key points

  • Transition metals melt at very high temperatures (e.g. Cr 1907 °C, Fe 1538 °C) whereas Group 1 elements have low melting points (Na 97 °C, K 63 °C).
  • Their densities are much higher; e.g. Fe 7.87 g cm⁻³ and Cu 8.96 g cm⁻³ versus ≈1 g cm⁻³ for alkali metals.
  • They are strong and hard, whereas Group 1 metals are soft and can be cut with a knife.
  • Many oxidise slowly, forming protective oxide layers (Cr₂O₃ film stops further attack).
  • In cold water transition metals are largely unreactive; alkali metals react violently producing heat and H₂ gas.
  • They typically react more moderately with halogens; e.g. Cu + Cl₂ at high temperature gives CuCl₂ rather than an explosive reaction like K + Br₂ → KBr + Br₂ .”,

Watch out for

  • Do not confuse chromium’s violet solution with the blue–green solutions of nickel or copper; only Cr gives a purple/blue‑violet colour.
  • Remember that alkali metals form only +1 ions, so they cannot show more than one oxidation state.

Remember: Use the high melting point and density to identify transition metals first, then confirm with characteristic oxide colours and solution hues.

Transition metals Stretch

For transition metals, compare with Group 1 elements and recall key properties such as multiple oxidation states, coloured compounds and catalytic use.

Key words

transition
metals in d‑block of the periodic table
alkali
Group 1 metals that are highly reactive

Key points

  • Transition metals have high melting points (e.g. Cr 1907 °C, Fe 1538 °C) versus low for Group 1 (Na 97 °C), so they remain solid at normal temperatures.
  • Densities of transition metals are much greater – Fe 7.87 g cm⁻³, Cu 8.96 g cm⁻³ compared with ≈1 g cm⁻³ for Na or K.
  • They are strong and hard; alkali metals are soft and can be cut by a knife.
  • With oxygen, many transition metals form thin protective oxides (e.g. Cr₂O₃) that slow further oxidation – Group 1 metal oxides grow rapidly.
  • In cold water transition metals react little (Fe, Mn dissolve slowly, Cu almost none); alkali metals give vigorous reactions with heat and H₂ release.
  • With halogens transition metals form metal‑halide salts at moderate rates; alkali metals undergo fast, often violent halogenations (K + Br₂ → KBr).

Watch out for

  • The exam sometimes asks for “possible” or “most common” oxidation states; remember that Fe can form +2 and +3 but not a +1 state in standard GCSE chemistry.
  • In questions about reactivity, don’t assume all transition metals behave like alkali metals – they are generally less reactive with water.

Remember: Colourful transition metal compounds result from d‑d transitions; the colour can give clues to oxidation state. Catalytic activity is a key industrial advantage and links to processes such as Haber–Bosch (Fe), hydrogenation (Co, Ni) and catalytic converters (Cu).

✏️ Try 3 quick questions

  1. Which comparison is correct about reactivity with oxygen at room temperature? A) Transition metals are more reactive than Group 1 elements B) Both react at the same rate C) Transition metals are less reactive than Group 1 elements D) Only transition metals react

  2. Which statement correctly compares the hardness of nickel and potassium?

  3. Sodium melts at 98 °C and chromium at 1908 °C. Find the difference in their melting points in kelvin.

Practise it with real exam questions

4 Triangles has quick questions on transition metals, real GCSE past-paper questions with their mark schemes, and a revision plan that picks what to work on next.

Try the quick questions

📝 Worksheets and a knowledge organiser to print

Questions on this topic for a lesson, homework or revision - a quick "do now", misconception questions, small steps that change one thing at a time, and practice, with answers on the last page.

Easy Medium Hard 📄 Knowledge organiser

🔤 Key words to know

Transition metal
refers to a metal element placed in the block between Groups 2 and 3 in the periodic table.
Catalyst
a chemical that speeds up the rate of a reaction without itself being used up.
Ion
an atom or group of atoms with a positive or negative charge due to the loss or gain of electrons.
Coloured compounds
Transition metal compounds are often coloured, e.g. copper sulfate is blue.
Ions with different charges
Transition metals can form more than one ion, e.g. Fe²⁺ and Fe³⁺.
High melting point
Transition metals melt at higher temperatures than group 1.

Many definitions from Oak National Academy (Open Government Licence).

When it's usually taught: Year 10 - Groups of the periodic table.

💼 Where it could take you

Jobs where people use this every day - whichever way you go after school.

Straight from school or an apprenticeship

With college or an advanced apprenticeship

With a degree

Each job opens its National Careers Service profile: what it pays, the hours, and how to get in.

📺 Watch a lesson on this

Each is a science lesson by Oak National Academy licensed under Open Government Licence (OGL). Lessons open on Oak National Academy's site.

More on Atomic Structure & the Periodic Table