Revision › Transition metals › Worksheet
Transition metals Hard
GCSE Chemistry · Atomic Structure & the Periodic Table · Name ____________________ Date ________
Builds on: The periodic table
Do now
Quick questions on earlier topics - to get your brain going.
The most reactive halogen that can displace any other from its salt solution is which element? [1]
Elements that tend to form positive ions are called what? [1]
Which is right?
Choose the right answer - then say what mistake each wrong one makes.
An unknown metal X is dissolved in dilute nitric acid producing a violet solution. The student then adds hydrogen peroxide (H₂O₂) and the solution turns green. Which sequence below best explains this observation?
- The colour change is due to a temperature rise during the reaction, not redox chemistry
- 2 only – X was iron(II); oxidation produced Fe³⁺, giving green in water
- 3 only – X was nickel; its violet colour changes to green when oxidised by H₂O₂
- 1 only – X was chromium(III); oxidation by H₂O₂ gave chromium(VI), which is green
A student dissolves a small piece of an unknown metal in dilute nitric acid, obtaining a violet solution. He then adds a few drops of sodium hydroxide, which turns the mixture blackish‑green and insoluble. Which explanation best accounts for these observations?
- The metal is nickel; Ni²⁺ gives a blue solution that turns green on addition of NaOH
- The metal is iron; Fe³⁺ gives a purple solution and the hydroxide dissolves in more NaOH
- The observations are impossible; transition metals cannot give coloured solutions
- The metal is chromium; Cr³⁺ gives a violet complex while Cr(OH)₃ is green‑black
Practice
Sodium melts at 98 °C and chromium at 1908 °C. Find the difference in their melting points in kelvin. [2]
When reacting sodium metal with cold water in a laboratory demonstration, which of the following precautions is essential? A) Perform the experiment inside a sealed plastic bag B) Keep a fire extinguisher (Class D) within 1 m C) Wear heat‑resistant gloves D) Store sodium in an airtight container before use [2]
- B
- D
- A
- C
The melting point of iron is 1538 °C and that of potassium is 63.5 °C. What is the difference between their melting points expressed in kelvin? (Round to the nearest whole number) [1]
An alloy is made from 70 % chromium and 30 % titanium. Which property will it most likely exhibit when exposed to cold water at room temperature? [1]
- C) moderate reaction
- B) no reaction
- A) vigorous reaction
- D) formation of metallic hydrogen
Which of the following best defines a transition metal? [1]
- D) A metal that melts at low temperatures
- C) A metal that has incomplete d subshells
- B) A metal that is found in Group 1
- A) A metal with only one oxidation state
Which of the following is a typical property of transition metals but not of Group 1 elements? [1]
- B) They have lower densities than aluminium
- C) Their melting points are generally higher than those of Group 1 metals
- A) They react vigorously with cold water at room temperature
- D) They only form +2 ions
Which statement correctly compares the hardness of nickel and potassium? [1]
- D) Hardness cannot be compared because they are different metals.
- C) They have the same hardness.
- A) Nickel is harder than potassium.
- B) Potassium is harder than nickel.
Which statement reflects a common misconception about transition metals? [1]
- A) Their compounds can be coloured
- B) Ions of different charges are possible
- D) They conduct electricity when solid
- C) They react quickly with cold water
Which of the following is a typical property that distinguishes transition metals from Group 1 elements? [1]
- D) They dissolve readily in cold water
- C) They react more slowly with oxygen at room temperature
- B) They are less dense than alkali metals
- A) They have lower melting points
The melting point of iron is \(1538\,^\circ\text{C}\). Convert this value to Kelvin (K). Give your answer as a whole number. [1]
When cobalt metal is left at room temperature in air, which of the following best describes its reaction with oxygen? [1]
- B) It reacts slowly forming CoO
- C) No reaction occurs
- D) Oxide forms only when heated above 500 °C
- A) It reacts rapidly forming CoO
If a sample of manganese has a mass of 7.2 g and occupies a volume of 1.0 cm³, what is its density? Give your answer in kg m⁻³ rounded to the nearest integer. [1]
Exam practice
Real past-paper questions on transition metals, with their mark schemes, are in 4 Triangles - free to practise.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
During chromatography you observe two spots with Rf values 0.45 and 0.78 respectively. Which of the following statements below is a common misunderstanding? Answer: b [1]
- A higher Rf value means the substance has lower affinity for the paper.
- Both spots must belong to the same pure compound.
- The solvent front cannot be used to calculate Rf if it moves unevenly.
- The colour of the spot determines its Rf value.
Which group of the periodic table contains the noble gases? [2]
- Group 1
- Group 7
- Group 17
- Group 0
A small piece of baking soda is placed inside a sealed chamber containing an unknown gas. No fizzing occurs after 5 min. Which gas is most likely present? [1]
- O₂
- H₂
- CH₄
- CO₂
Which test would confirm the presence of chlorine gas? [1]
- Damp litmus paper
- A burning splint
- A glowing splint
- Lime water
A student uses paper chromatography to separate pigments extracted from a leaf. Which of the following best describes what will be observed? Answer: b [1]
- Only one spot because all pigments have identical Rf values.
- Multiple coloured spots, each with distinct Rf values.
- The solvent front will dissolve all pigments into a single cloud.
- Pigments will not travel on the paper as they are too large.
Do halogens such as chlorine form positive ions when dissolved in water? [2]
- Yes, they form +1 ions
- They can form both +1 and -1 ions equally
- They do not dissolve in water
- No, they prefer to gain an electron and form negative ions
Still going? Unlimited questions on transition metals, marked as you go: 4triangles.co.uk
💼 Where it leads: Welder · Quality control assistant · Materials technician · Laboratory technician - more
Stuck, or finished? Scan for help on transition metals - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- fluorine
- metals
- D 1 only – X was chromium(III); oxidation by H₂O₂ gave chromium(VI), which is green
Step 1: recognise the violet colour as typical of Cr³⁺. Step 2: remember that H₂O₂ can raise its oxidation state to +6, producing chromate or dichromate ions which are green in solution. The other options mix up colours and oxidation states. … - D The metal is chromium; Cr³⁺ gives a violet complex while Cr(OH)₃ is green‑black
The key step is recognising that a violet aqueous solution points to Cr³⁺, and that adding NaOH produces the green‑black hydroxide precipitate. Students must link colour with oxidation state and then base‑hydroxide reactivity. A: Nickel salts are violet and change to green with base B: Fe³⁺ always appears purple and its hydroxide remains soluble C: Transition metals never produce colours - 1810
- A B
- 1475
- B B) no reaction
- B C) A metal that has incomplete d subshells
- B C) Their melting points are generally higher than those of Group 1 metals
- C A) Nickel is harder than potassium.
- D C) They react quickly with cold water
- B C) They react more slowly with oxygen at room temperature
- 1811
- A B) It reacts slowly forming CoO
- 7200
- B Both spots must belong to the same pure compound.
If two different Rf values are observed, they represent two different compounds – not a single pure one. Answer: b - D Group 0
Noble gases are in Group 0. - A O₂
Baking soda reacts with CO₂ to produce fizz; no reaction suggests the gas is not CO₂. - A Damp litmus paper
Chlorine bleaches damp litmus paper, turning it white. - B Multiple coloured spots, each with distinct Rf values.
Different leaf pigments (e.g., chlorophylls, carotenoids) have different affinities for the stationary phase and thus separate into distinct spots. Answer: b - D No, they prefer to gain an electron and form negative ions
Halogens have 7 valence electrons; they typically gain one electron to become –1 ions.
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on transition metals - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk