Revision › Using materials › Worksheet
Using materials Easy
GCSE Chemistry · Using Resources · Name ____________________ Date ________
Builds on: Reversible reactions and equilibrium, The Haber process and fertilisers
Do now
Quick questions on earlier topics - to get your brain going.
Which principle predicts how a system reacts to changes in conditions? [1]
The reverse of an exothermic forward reaction is ______. [1]
Which statement correctly compares the effect of temperature on the rate and equilibrium position in the Haber process? Tick one box. [1]
- Higher temperature decreases rate but increases yield
- Higher temperature increases both rate and yield
- Higher temperature increases rate but decreases yield
- Higher temperature decreases both rate and yield
Which metal serves as the catalyst in the Haber process? [1]
Practice
Which condition is essential for rusting to occur on iron? [1]
- C) Both air and water (correct).
- B) Only exposure to water.
- D) Neither – rusting does not need either.
- A) Only exposure to air.
Which alloy contains copper and tin? [1]
Which metal is least likely to corrode when left outside in damp weather? [1]
- C) Stainless steel (correct).
- D) Aluminium
- A) Iron
- B) Zinc
A piece of jewellery contains a 200 g alloy that is 18‑carat gold. How many grams of pure gold are in the piece? (Express your answer to the nearest whole gram.) [1]
Which metal is used in galvanisation to provide sacrificial protection? [1]
A sheet of zinc is applied over an iron nail in a damp area. Which statement best explains how the zinc protects the nail from rusting? [1]
- D) The coating reduces the nail’s surface area.
- C) Zinc is more reactive and corrodes first, sparing the iron (correct).
- B) Zinc reacts with water to form a protective film.
- A) Zinc is less reactive, so it does not corrode.
A small watch band is made from an alloy that costs £120 per kilogram. If one band weighs 0.05 kg, what is its cost? [1]
A bicycle frame is made from an alloy that weighs 1.2 kg and has a lifespan of 10 years. If the cost per kilogram is £100, what is the total cost of the frame? [1]
What is the term for a polymer that does not melt when heated? [1]
Stretch
A step up - try these if you finish.
A stainless steel bolt has a mass of 150 g and density of 7.8 g cm⁻³. What is its volume in cubic centimetres? (Answer to the nearest 0.01 cm³) [1]
A 22‑carat gold jewellery contains 91.7 % gold and the rest are silver and copper. Which statement best explains why it is not as soft as 24‑carat gold? A. It has a lower density than pure gold. B. The alloying metals increase hardness by forming intermetallics. C. The presence of impurities reduces melting point drastically. D. Carats are unrelated to composition. [1]
- A
- D
- C
- B
Aluminium develops a protective oxide layer that prevents corrosion. A. True, the oxide film stops further oxidation. B. False, aluminium always rusts like iron. C. True, but only if water is present. D. False, because aluminium does not oxidise. [1]
- B
- D
- C
- A
Which of the following statements is true about galvanisation? A. Zinc is more reactive than iron and protects iron by sacrificial anode action. B. Galvanisation involves coating steel with copper to prevent rust. C. It requires both air and water to work. D. The zinc layer dissolves completely after 5 years. [1]
- B
- A
- C
- D
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
An exothermic reversible reaction releases \(45\text{ kJ}\) of heat for every mole of reactant A that reacts. If \(0.20\text{ mol}\) of A is consumed, how much heat (in kJ) is released? [1]
(Reversible reactions and equilibrium)Tick one box. When running a reversible reaction in an airtight flask at high temperature, which precaution must be taken to avoid dangerous pressure build‑up? [1]
- Use a cold water bath
- Add more reactant
- Ignore it
- Use a pressure relief valve
Which of the following is an essential safety measure when operating a Haber reactor? Tick one box. [1]
- Add water to the gas mixture before reaction
- Keep pressure below atmospheric pressure
- Use a non‑metal catalyst
- Ensure good ventilation for ammonia leaks
In the Haber process, 28 g of nitrogen gas reacts completely with hydrogen to give ammonia. How many grams of hydrogen are required? [1]
(The Haber process and fertilisers)
Still going? Unlimited questions on using materials, marked as you go: 4triangles.co.uk
💼 Where it leads: Welder · Quality control assistant · Materials technician · Laboratory technician - more
Stuck, or finished? Scan for help on using materials - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- Le Chatelier’s Principle
- Endothermic
- C Higher temperature increases rate but decreases yield
- Iron.
- A C) Both air and water (correct).
- Bronze
- A C) Stainless steel (correct).
- 150
- Zinc
- B C) Zinc is more reactive and corrodes first, sparing the iron (correct).
- £6
- £120
- Thermosetting
- 19.23
- D B
- D A
- B A
- 9
- D Use a pressure relief valve
- D Ensure good ventilation for ammonia leaks
- 6
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on using materials - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk