Revision › Using materials › Worksheet

Using materials Medium

GCSE Chemistry · Using Resources · Name ____________________ Date ________

Builds on: Reversible reactions and equilibrium, The Haber process and fertilisers

Do now

Quick questions on earlier topics - to get your brain going.

  1. Which principle predicts how a system reacts to changes in conditions? [1]

  2. The reverse of an exothermic forward reaction is ______. [1]

  3. Which statement correctly compares the effect of temperature on the rate and equilibrium position in the Haber process? Tick one box. [1]

    1. Higher temperature decreases rate but increases yield
    2. Higher temperature increases both rate and yield
    3. Higher temperature increases rate but decreases yield
    4. Higher temperature decreases both rate and yield
  4. Which metal serves as the catalyst in the Haber process? [1]

Practice

  1. A stainless steel bolt has a mass of 150 g and density of 7.8 g cm⁻³. What is its volume in cubic centimetres? (Answer to the nearest 0.01 cm³) [1]

  2. A 22‑carat gold jewellery contains 91.7 % gold and the rest are silver and copper. Which statement best explains why it is not as soft as 24‑carat gold? A. It has a lower density than pure gold. B. The alloying metals increase hardness by forming intermetallics. C. The presence of impurities reduces melting point drastically. D. Carats are unrelated to composition. [1]

    1. A
    2. D
    3. C
    4. B
  3. Aluminium develops a protective oxide layer that prevents corrosion. A. True, the oxide film stops further oxidation. B. False, aluminium always rusts like iron. C. True, but only if water is present. D. False, because aluminium does not oxidise. [1]

    1. B
    2. D
    3. C
    4. A
  4. Which of the following statements is true about galvanisation? A. Zinc is more reactive than iron and protects iron by sacrificial anode action. B. Galvanisation involves coating steel with copper to prevent rust. C. It requires both air and water to work. D. The zinc layer dissolves completely after 5 years. [1]

    1. B
    2. A
    3. C
    4. D
  5. An iron sheet of area 0.25 m² rusts at a rate of 5 mg m⁻² day⁻¹. How many grams of rust will form after 10 days? [1]

  6. Which material is more suitable for a bicycle frame due to its high strength‑to‑weight ratio? A. Aluminium alloy B. Pure iron C. Stainless steel D. Cast lead [1]

    1. D
    2. B
    3. A
    4. C
  7. Which condition is essential for rusting to occur on iron? [1]

    1. C) Both air and water (correct).
    2. B) Only exposure to water.
    3. D) Neither – rusting does not need either.
    4. A) Only exposure to air.
  8. Which alloy contains copper and tin? [1]

  9. Which metal is least likely to corrode when left outside in damp weather? [1]

    1. C) Stainless steel (correct).
    2. D) Aluminium
    3. A) Iron
    4. B) Zinc
  10. A piece of jewellery contains a 200 g alloy that is 18‑carat gold. How many grams of pure gold are in the piece? (Express your answer to the nearest whole gram.) [1]

  11. Which metal is used in galvanisation to provide sacrificial protection? [1]

  12. A sheet of zinc is applied over an iron nail in a damp area. Which statement best explains how the zinc protects the nail from rusting? [1]

    1. D) The coating reduces the nail’s surface area.
    2. C) Zinc is more reactive and corrodes first, sparing the iron (correct).
    3. B) Zinc reacts with water to form a protective film.
    4. A) Zinc is less reactive, so it does not corrode.

Stretch

A step up - try these if you finish.

  1. Which of the following statements correctly compares ceramic and polymer materials regarding heat resistance? [1]

    1. Ceramics can be moulded at room temperature while polymers cannot.
    2. Polymers are more thermally conductive than ceramics.
    3. Ceramics have a higher melting point than polymers.
    4. Both materials exhibit the same thermal expansion.
  2. A bronze alloy is made of 12 % tin and the rest copper. If a 300 g sample of bronze is required, how many grams of tin are needed? [2]

  3. A steel alloy contains 0.2 % carbon and 1.5 % chromium. If you produce 2 kg of the alloy, how many grams of chromium are present? [2]

  4. When handling zinc electrodes for galvanisation, which safety precaution is essential? [1]

    1. Store zinc in direct sunlight.
    2. Use a heat lamp to accelerate galvanisation.
    3. Wear lead aprons during the process.
    4. Keep the working area well ventilated.

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. In the reaction \(2\mathrm{NO(g)} + \mathrm{O_2(g)} \rightleftharpoons 2\mathrm{NO_2(g)}\), at equilibrium the partial pressure of NO is 0.30 atm and that of NO₂ is 0.45 atm. If \(K_p\) for this reaction is 3.0, what is the equilibrium partial pressure of O₂? (Give your answer in atm to two decimal places.) [1]

    (Reversible reactions and equilibrium)
  2. In the reaction \(\mathrm{C_2H_4(g)} + \mathrm{H_2(g)} \rightleftharpoons \mathrm{C_2H_6(g)}\), a sample was initially prepared in a 1‑L container with 0.50 mol of ethene and 0.30 mol of hydrogen. After reaching equilibrium, 0.10 mol of each reactant had been converted to product. What is the value of \(K_c\) for this reaction at that temperature? (Give your answer rounded to two significant figures.) [1]

    (Reversible reactions and equilibrium)
  3. A new factory plans to use methane (CH₄) instead of natural gas as the hydrogen source for its Haber process. Which part of the overall production chain will most directly change? ☐ The iron catalyst ☐ The compression pressure stage ☐ The reforming step that generates H₂ ☐ The cooling unit [1]

    1. The iron catalyst
    2. The reforming step that generates H₂
    3. The compression pressure stage
    4. The cooling unit
    (The Haber process and fertilisers)
  4. When operating a commercial Haber reactor, which of the following safety devices is essential to prevent injury if pressure builds beyond design limits? [1]

    1. Insulation jacket
    2. Magnetic stirrer
    3. Pressure‑relief valve
    4. Thermocouple
    (The Haber process and fertilisers)

💼 Where it leads: Welder · Quality control assistant · Materials technician · Laboratory technician - more

Stuck, or finished? Scan for help on using materials - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. Le Chatelier’s Principle
  2. Endothermic
  3. C Higher temperature increases rate but decreases yield
  4. Iron.
  5. 19.23
  6. D B
  7. D A
  8. B A
  9. 0.0125
  10. C A
  11. A C) Both air and water (correct).
  12. Bronze
  13. A C) Stainless steel (correct).
  14. 150
  15. Zinc
  16. B C) Zinc is more reactive and corrodes first, sparing the iron (correct).
  17. C Ceramics have a higher melting point than polymers.
  18. 36 g​
  19. 30 g​
  20. D Keep the working area well ventilated.
  21. 0.75
  22. 1.3
  23. B The reforming step that generates H₂
  24. C Pressure‑relief valve
    The reactor operates at about 200 atm. A pressure‑relief valve automatically vents excess pressure, protecting equipment and people.

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on using materials - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk