a ratio that shows how many one unit equals another
How to do it
Identify the type of quantity (length, area, volume, mass).
Note the required unit for the answer.
Convert all numbers to that unit using appropriate factors.
Do the calculation and give the result in the chosen unit.
Watch out for
Always use the same unit for all parts of a calculation.
Convert to the required answer unit before giving your final value.
Remember: Density = mass ÷ volume. Convert units with a conversion factor. Give the result in the requested unit.
Units of measure Core
For GCSE you need to use SI units unless the text says otherwise. Remember metric prefixes: kilo‑(k) = ×1000, centi‑(c) = ÷100 and milli‑(m) = ÷1000.
Key words
Length
metres (m)
Area
square metres (m²)
Volume/Capacity
cubic metres (m³) or litres (L)
Mass
kilograms (kg)
How to do it
Write down all given measurements in SI units, applying prefixes for multiples and sub‑multiples.
Convert any non‑SI figures to SI before doing further calculations; e.g. inches to centimetres using 1 in=2.54 cm.
Perform the required arithmetic: multiply lengths for volume, square or cube dimensions as needed.
When changing units, multiply by the correct conversion factor (10, 1000, etc.) and check that the resulting unit is correct.
Simplify the final answer and verify unit consistency.
Watch out for
Always convert to SI before performing the main calculation – this avoids errors in conversion later.
Check that you use the right prefix: km = 1000 m, cm = 1/100 m, mm = 1/1000 m.
When converting volumes remember that 1 L = 1 dm³ and 1 dm³ = 10⁻³ m³.
Remember: If the problem asks for speed or rate, combine units correctly; e.g. 60 km/h = 16.67 m/s (divide by 3.6).
Units of measure Stretch
Use standard units for length, area, volume, mass, time and money. Know how to change between them quickly and recognise the correct unit when asked.
Key words
conversion factor
A ratio that tells you how many of one unit equal another, e.g. 1 km = 1000 m.
standard units
Units normally used for a quantity – metres for length, litres for capacity, kg/m³ for density.
How to do it
Identify the quantity and its current unit.
Write down the conversion factor(s) needed to reach the target unit.
Multiply or divide, cancelling units where possible.
Check that the result is in the required standard unit.
Watch out for
Common trap: forgetting to convert minutes to hours before dividing.
Another: using the wrong conversion factor for metres to kilometres; remember 1 km = 1000 m, not 10 m.
Always double‑check that your final unit matches what is asked – a common slip is to report litres when cubic centimetres were requested.
Remember: Unit conversions are often used with speed (m/s ↔ km/h), density (kg/m³ ↔ g/cm³) and capacity (l ↔ ml). Mastering the chain of factors saves time in exams.
✏️ Try 3 quick questions
A delivery van travels 90 kilometres over 3 hours. What is its average speed in km/h?
A rectangle has a length of 4.2 metres and a width of 3.6 metres. First convert each dimension to centimetres, then calculate the area in square centimetres.
How many centimetres are there in 12 metres?
There are more on this in 4 Triangles, with hints and worked answers, and real past-paper questions. Carry on there.
Practise it with real exam questions
4 Triangles has quick questions on units of measure, real GCSE past-paper questions with their mark schemes, and a revision plan that picks what to work on next.
Questions on this topic for a lesson, homework or revision - a quick "do now", misconception questions, small steps that change one thing at a time, and practice, with answers on the last page.