Revision › Density and changes of state › Worksheet

Density and changes of state Easy

GCSE Physics · Particle Model of Matter · Name ____________________ Date ________

Builds on: Compound measures

Do now

Quick questions on earlier topics - to get your brain going.

  1. A container of gas has a volume of 0.10 m³ and is at a pressure of 80 kPa. The temperature is kept constant while the pressure increases to 160 kPa. What is the new volume of the gas? Provide your answer in m³. [1]

  2. Air occupies a fixed volume of 0.02 m³ at a pressure of 100 kPa. If the temperature is kept constant and the pressure is raised to 250 kPa, what will the new volume be? Give your answer in m³. [1]

  3. A hand pump exerts a normal force of \(120\,\text{N}\) over an area of \(0.6\,\text{m}^2\). What is the pressure on the surface? Give your answer in pascals to the nearest integer. [1]

  4. Atmospheric pressure results from collisions of what particles? [1]

Practice

  1. What is the density of a material if it has a mass of 8 kg and a volume of 2 m³? Express your answer in kg/m³. [1]

  2. During the density experiment with an irregular object, which of the following must be done to ensure accurate volume measurement? [1]

    1. D) Add salt to increase density
    2. C) Use a thermometer to measure temperature during measurement
    3. B) Record the water level before and after submerging the object
    4. A) Weigh the object inside the water
  3. Which statement shows an incorrect idea about density and temperature? [1]

    1. A) Ice floats because it has lower density than water
    2. C) Air density decreases as temperature rises
    3. B) Water expands when it freezes
    4. D) Ice has higher density than liquid water
  4. A sample has a density of 850 kg/m³ and a mass of 1700 kg. What is its volume? Express in m³. [1]

  5. Which change of state involves a solid becoming a liquid while keeping mass constant? [1]

  6. An irregularly shaped block of plastic has a mass of 6 kg and displaces 2 m³ of water when submerged. What is its density? Express in kg/m³. [1]

  7. Which of the following best explains why a gas is less dense than a liquid? [1]

    1. C) The particles in a gas are spread further apart than those in a liquid
    2. D) Gases do not contain particles
    3. A) Gas particles are heavier than liquid particles
    4. B) A gas occupies a smaller volume than a liquid

Stretch

A step up - try these if you finish.

  1. The density of copper is 8.96 g/cm³. What is the mass of a 50‑cm³ sample? [1]

  2. Which piece of equipment is essential when measuring the volume of an irregular solid by water displacement? [1]

    1. c) Displacement can with a narrow spout
    2. a) Vernier caliper
    3. d) Analytical balance
    4. b) Beaker
  3. Which statement correctly describes how density changes when water freezes into ice? [1]

    1. b) Ice has a lower density than liquid water.
    2. d) Density cannot be compared because they are different states.
    3. c) Ice and liquid water have the same density.
    4. a) Ice has a higher density than liquid water.
  4. Calculate the density in kg/m³ of a cubic block that measures 0.20 m on each side and has a mass of 5.6 kg. [1]

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which of the following statements correctly describes a force? [1]

    1. It has both magnitude and direction.
    2. It has magnitude only.
    3. It is always contact.
    4. It cannot be represented by an arrow.
    (Forces, weight and resultant force)
  2. Name one example of a contact force. [1]

    (Forces, weight and resultant force)
  3. Calculate the change in thermal energy (ΔE) when 0.3 kg of iron is heated from 25 °C to 40 °C. The specific heat capacity of iron is 450 J kg⁻¹ °C⁻¹. Give your answer in joules to the nearest joule. [1]

    (Internal energy and latent heat)
  4. A force of 5 N stretches a spring by 0.20 m. Find the spring constant k. (Give your answer in N/m) [1]

    (Springs and elasticity)
  5. What are the units of a spring constant? [1]

    (Springs and elasticity)
  6. Always, sometimes or never true? If I write the density of a substance as 1 kg ÷ 1 m³, that is equivalent to 1 kg/m³. [1]

    1. Always true
    2. Sometimes true
    3. Never true
    (Compound measures)

💼 Where it leads: Plumber · Baker · Heating and ventilation engineer · Commercial diver - more

Stuck, or finished? Scan for help on density and changes of state - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. 0.05
  2. 0.008
  3. 200
  4. air molecules
  5. 4
  6. C B) Record the water level before and after submerging the object
  7. D D) Ice has higher density than liquid water
  8. 2
  9. melting
  10. 3
  11. A C) The particles in a gas are spread further apart than those in a liquid
  12. 448
  13. A c) Displacement can with a narrow spout
  14. A b) Ice has a lower density than liquid water.
  15. 700
  16. A It has both magnitude and direction.
    A force is a vector quantity, so it must have both magnitude and direction.
  17. friction
  18. 2025
  19. 25
  20. N/m
  21. A Always true
    Always true. The symbol ‘÷’ is simply another way of writing a fraction. In physics and maths a compound unit such as density can be written with a division sign or with a slash – both represent the same numerical value. *True case*:  2 kg ÷ 4 m³ = 0.5 kg/m³, which is exactly the same as writing 0.5 kg/m³. *False case*: None – the equivalence holds for every pair of mass and volume. …

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on density and changes of state - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk