Revision › Density and changes of state › Worksheet

Density and changes of state Hard

GCSE Physics · Particle Model of Matter · Name ____________________ Date ________

Builds on: Compound measures

Do now

Quick questions on earlier topics - to get your brain going.

  1. A container of gas has a volume of 0.10 m³ and is at a pressure of 80 kPa. The temperature is kept constant while the pressure increases to 160 kPa. What is the new volume of the gas? Provide your answer in m³. [1]

  2. Air occupies a fixed volume of 0.02 m³ at a pressure of 100 kPa. If the temperature is kept constant and the pressure is raised to 250 kPa, what will the new volume be? Give your answer in m³. [1]

  3. A hand pump exerts a normal force of \(120\,\text{N}\) over an area of \(0.6\,\text{m}^2\). What is the pressure on the surface? Give your answer in pascals to the nearest integer. [1]

  4. Atmospheric pressure results from collisions of what particles? [1]

Practice

  1. A sealed container holds 5.0 g of carbon dioxide gas that occupies a volume of 400 cm³. Calculate the density in kg / m³, rounded to one decimal place. [2]

  2. A piece of aluminium has a mass of 3.6 g and occupies a volume of 1.4 cm³. Calculate its density in kg m⁻³, rounded to the nearest whole number. [2]

  3. Which of the following is true about the density of ice compared to liquid water? (a) Ice has a higher density than liquid water. (b) Ice has approximately the same density as liquid water. (c) Ice has a lower density than liquid water. (d) The density comparison depends on temperature. [1]

    1. (c)
    2. (b)
    3. (a)
    4. (d)
  4. A metal cube has density 8000 kg / m³ and side length 2 cm. What is its mass in grams? Give your answer rounded to the nearest whole number. [2]

  5. Which statement correctly compares the density of water to that of iron? (a) Iron has a higher density than water. (b) Water has a higher density than iron. (c) Both have the same density. (d) Density comparison depends on temperature. [1]

    1. (c)
    2. (d)
    3. (b)
    4. (a)
  6. Which statement best describes the relationship between the densities of iron and water at room temperature? (a) Iron has a higher density than water. (b) Iron has approximately the same density as water. (c) Iron has a lower density than water. (d) The comparison depends on pressure. [1]

    1. c
    2. b
    3. a
    4. d
  7. The density of copper is 8.96 g/cm³. What is the mass of a 50‑cm³ sample? [1]

  8. Which piece of equipment is essential when measuring the volume of an irregular solid by water displacement? [1]

    1. c) Displacement can with a narrow spout
    2. a) Vernier caliper
    3. d) Analytical balance
    4. b) Beaker
  9. Which statement correctly describes how density changes when water freezes into ice? [1]

    1. b) Ice has a lower density than liquid water.
    2. d) Density cannot be compared because they are different states.
    3. c) Ice and liquid water have the same density.
    4. a) Ice has a higher density than liquid water.
  10. Calculate the density in kg/m³ of a cubic block that measures 0.20 m on each side and has a mass of 5.6 kg. [1]

  11. A sample of ethanol has a mass of 78.5 g and a volume of 100 mL. What is its density expressed in kg/m³? [1]

  12. Which of the following is a common misconception about gas density? [1]

    1. a) Gases are denser than solids.
    2. c) The same amount of air occupies less space at higher temperature.
    3. d) Gases have negligible mass compared to liquids.
    4. b) Gases expand to fill any container they occupy.

Exam practice

Real past-paper questions on density and changes of state, with their mark schemes, are in 4 Triangles - free to practise.

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which footwear will exert a greater pressure on the ground per unit area? A Snowshoes with an area of 0.5 m². B High‑heeled shoes with an area of 0.05 m². C Bare feet with an area of 0.1 m². D All footwear exert the same pressure if weight is equal. [1]

    1. D
    2. C
    3. B
    4. A
    (Pressure in fluids)
  2. Which process will increase the internal energy of a closed system? A. Cooling the system B. Increasing its pressure while keeping temperature constant C. Heating the system D. Adding mass to the system [1]

    1. Heating the system
    2. Adding mass to the system
    3. Increasing its pressure while keeping temperature constant
    4. Cooling the system
    (Internal energy and latent heat)
  3. A sealed piston contains a fixed mass of gas at an initial pressure of 200 kPa and volume of 0.05 m³. The pressure is increased to 300 kPa while the temperature remains constant. Using Boyle’s law, calculate the new volume of the gas. Give your answer to one decimal place in litres. [2]

    (Gas pressure)
  4. Which of the following precautions is most important when measuring the spring constant using a hanging‑mass apparatus? [1]

    1. Use a spring that has already been stretched beyond its limit
    2. Ensure the mass does not hit the floor before equilibrium is reached
    3. Neglect the weight of the hanging mass if it is small
    4. Apply the largest possible mass to get a large extension
    (Springs and elasticity)
  5. A toy car’s bumper behaves like a spring. When the bumper compresses by 0.05 m under a load of 2 N, what is its spring constant? [2]

    (Springs and elasticity)
  6. When measuring the pressure of a gas with a manometer, which practice is essential for an accurate reading? Tick one box. [1]

    1. ☐ Ensure the instrument is level.
    2. ☐ Use an unsealed container.
    3. ☐ Keep the temperature constant.
    4. ☐ Measure at the mid‑point of the tube.
    (Gas pressure)

💼 Where it leads: Plumber · Baker · Heating and ventilation engineer · Commercial diver - more

Stuck, or finished? Scan for help on density and changes of state - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. 0.05
  2. 0.008
  3. 200
  4. air molecules
  5. 12.5
    5 g = 0.005 kg; 400 cm³ = 4×10⁻⁴ m³; density = 0.005 ÷ 4×10⁻⁴ = 12.5 kg/m³.
  6. 2570
  7. A (c)
    Ice is less dense than water, so it floats.
  8. 64
    Side = 0.02 m; Volume = (0.02)³ = 8×10⁻⁶ m³; Mass = 8000×8×10⁻⁶ = 0.064 kg = 64 g.
  9. D (a)
    Iron’s density (~7870 kg/m³) is greater than water’s (1000 kg/m³).
  10. C a
  11. 448
  12. A c) Displacement can with a narrow spout
  13. A b) Ice has a lower density than liquid water.
  14. 700
  15. 785
  16. A a) Gases are denser than solids.
  17. C B
  18. A Heating the system
  19. 33.3
    p₁V₁ = p₂V₂ → V₂ = (p₁V₁)/p₂ = (200 kPa × 0.05 m³)/(300 kPa) = 0.0333 m³ = 33.3 L
  20. B Ensure the mass does not hit the floor before equilibrium is reached
  21. 40
    Use F = k e k = F/e = 2 / 0.05 = 40
  22. A ☐ Ensure the instrument is level.

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on density and changes of state - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk