Revision › Induction and transformers › Worksheet

Induction and transformers Hard

GCSE Physics · Magnetism & Electromagnetism · Name ____________________ Date ________

Builds on: Magnets and electromagnets, The motor effect

Do now

Quick questions on earlier topics - to get your brain going.

  1. Which of the following statements is true about permanent magnets? [1]

    1. ☐ They produce their own magnetic field.
    2. ☐ They have only one pole.
    3. ☐ Their poles change direction when moved.
    4. ☐ They become magnetic only when placed in a strong external field.
  2. A coil of wire wrapped around a core produces a magnetic field of 0.4 T when it has 250 turns of wire carrying a current of 3 A. If the current is kept at 3 A, how many turns are required to produce a magnetic field of 1.6 T? (Give your answer as a whole number of turns.) [1]

  3. What principle allows a loudspeaker to convert electrical signals into sound waves? [1]

  4. Which rule shows the relative orientation of force, current and magnetic field in a conductor? [1]

Practice

  1. If the magnetic flux through each turn changes at a rate of 0.02 Wb s⁻¹ and there are 30 turns, what is the magnitude of the induced emf in volts? [2]

  2. A transformer supplies a lamp rated at 100 W using a 230 V supply. The primary coil has 600 turns and the secondary coil has 200 turns. Assuming the transformer is ideal, what current flows through the lamp? Give your answer rounded to two decimal places. [2]

  3. An ideal transformer has a primary coil of 300 turns and a secondary coil of 900 turns. The primary is supplied with 220 V at a steady current of 5 A. What is the current in the secondary, assuming no power loss? Give your answer rounded to two decimal places. [2]

  4. Which statement reflects a common misconception about transformers? [1]

    1. An iron core is used because it reduces magnetic flux density.
    2. Transformers can increase power output without losses.
    3. Lenz’s law explains the direction of induced current.
    4. A higher number of turns in the secondary always gives a higher voltage.
  5. Which statement about induced emf is correct? [1]

    1. The magnitude of the induced emf increases with the number of turns in the coil.
    2. The direction of the induced current always follows the applied voltage.
    3. Lenz’s law states that an induced current does not oppose the change that caused it.
    4. The magnitude of the induced emf increases with the speed of motion but decreases with magnetic field strength.
  6. Which of the following correctly compares an alternator and a dynamo? [1]

    1. The dynamo uses a rotating magnetic field; the alternator uses a stationary field.
    2. Both produce DC; the alternator uses a rectifier.
    3. Neither can be used in power stations.
    4. The alternator produces AC, while the dynamo produces DC with rectification.
  7. A transformer supplies 120 W to a load at 12 V. The turns ratio of the primary to secondary is 10 : 1. Assuming 100 % efficiency, what is the current drawn from the mains? Give your answer in amperes. [1]

  8. When a wire is moved through a magnetic field but no closed circuit is completed, which statement is correct? A) An electric current will still flow along the wire. B) A potential difference will be induced across the ends of the wire, but no current flows. C) Nothing happens – neither voltage nor current is produced. D) Both voltage and current are produced. [1]

    1. B
    2. C
    3. A
    4. D
  9. Which safety precaution is essential when measuring voltage across a transformer secondary coil using a multimeter? A) Connect the meter in parallel to avoid damaging the circuit B) Ensure the meter leads are shorted before connection C) Only use a wattmeter, not a voltmeter D) The meter should be disconnected after each measurement [1]

    1. A
    2. D
    3. C
    4. B
  10. Which factor(s) affect the magnitude of an induced electromotive force (emf) in a conductor? A) Only the speed at which the conductor moves B) Only the strength of the magnetic field C) Only the number of turns in the coil D) All of the above [1]

    1. B
    2. D
    3. C
    4. A
  11. A device rotates a coil inside a constant magnetic field and uses a rectifier to produce a unidirectional output. What type of current does the device generate? A) Alternating current (AC) B) Direct current (DC) C) Both AC and DC D) Neither, it produces voltage but no current [1]

    1. D
    2. A
    3. C
    4. B
  12. A step‑down transformer has a primary winding of 200 turns and a secondary winding of 50 turns. If the mains supply is 240 V, what will be the voltage across the secondary winding? Give your answer in volts. [1]

Exam practice

Real past-paper questions on induction and transformers, with their mark schemes, are in 4 Triangles - free to practise.

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which statement correctly describes the difference between a solenoid and an electromagnet? [1]

    1. An electromagnet has an iron core, a solenoid may or may not.
    2. Both are identical devices.
    3. A solenoid is a permanent magnet.
    4. A solenoid has an iron core, an electromagnet does not.
    (The motor effect)
  2. A solenoid that contains an iron core produces a magnetic field that is: [1]

    1. the same as a solenoid without a core
    2. weaker than the same solenoid without the core
    3. zero inside the coil
    4. stronger than a solenoid without a core
    (The motor effect)
  3. When working with a strong neodymium magnet in the laboratory, which of the following is an important safety precaution? ☐ Keep the magnet away from metal objects such as pens and keys ☐ Cover the magnet with glass to prevent splashes ☐ Wear gloves that are conductive ☐ Turn off all lights around the magnet [1]

    1. Keep the magnet away from metal objects such as pens and keys
    2. Cover the magnet with glass to prevent splashes
    3. Turn off all lights around the magnet
    4. Wear gloves that are conductive
    (Magnets and electromagnets)
  4. Two bar magnets are brought close together with their north poles facing each other. What is the force between them? ☐ They attract ☐ They repel ☐ There is no force ☐ The forces cancel [1]

    1. There is no force
    2. They repel
    3. The forces cancel
    4. They attract
    (Magnets and electromagnets)

💼 Where it leads: Power station worker · Wind turbine technician · Electrician · Electrical engineer - more

Stuck, or finished? Scan for help on induction and transformers - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. A ☐ They produce their own magnetic field.
  2. 1000
  3. Motor effect
  4. Fleming's left-hand rule
  5. 0.6
  6. 1.3
  7. 1.67
  8. B Transformers can increase power output without losses.
  9. A The magnitude of the induced emf increases with the number of turns in the coil.
  10. D The alternator produces AC, while the dynamo produces DC with rectification.
  11. 1
  12. A B
  13. A A
  14. B D
  15. D B
  16. 60
  17. A An electromagnet has an iron core, a solenoid may or may not.
  18. D stronger than a solenoid without a core
  19. A Keep the magnet away from metal objects such as pens and keys
    A strong magnet can attract ferromagnetic objects suddenly; keeping metal away prevents accidental injury or damage.
  20. B They repel
    Two like poles repel each other – this is a non‑contact force.

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on induction and transformers - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk