The following key ideas help you understand how motion, magnetism and coils work together.
Key words
induced potential
voltage produced when a conductor moves in or through a magnetic field
generator effect
current that flows when the induced voltage drives a closed circuit
Lenz’s law
rule that says the induced current makes its own field opposing the change that created it
transformer
device with two coils on iron; changing current in one coil induces voltage in the other
Key points
Induced potential is voltage produced by moving a wire in or through a magnetic field.
When this voltage drives current through a circuit, the generator effect occurs.
Lenz’s law says induced current creates a field that opposes the change that made it.
Transformers transfer voltage between coils; more turns means higher output voltage.
Watch out for
None
Remember: These points cover everything you need to know for GCSE physics on induction and transformers. Good luck!
Induction and transformers Core
Key ideas that GCSE Physics students need to understand about the generator effect, its applications and transformers.
Key words
induced emf
potential difference created when a conductor moves in a magnetic field or when the magnetic flux changes.
Lenz's law
the induced current always flows so that its own magnetic field opposes the change that produced it.
transformer
two windings on an iron core; changing current in the primary induces voltage in the secondary.
Key points
When a conductor moves through a magnetic field or the field changes, an emf is induced across its ends.
The magnitude of the induced emf is proportional to the speed (or rate of change) of the flux, the magnetic field strength, the length of conductor inside the field and the number of turns in a coil.
Lenz's law gives the direction of the induced current; it opposes the motion or change that created the emf.
If the conductor is part of a complete circuit an induced current flows – this is called the generator effect.
An alternator uses a rotating coil in a fixed magnetic field, giving an alternating voltage because each half‑turn changes polarity.
A dynamo (rectifier) also uses a rotating coil but converts the alternating induced current to a constant direction, producing DC.
Watch out for
none
Remember: Use generator‑effect reasoning: motion/change → induced emf → complete circuit → current; apply Lenz’s law for polarity. For transformers, \(V_p/V_s = N_p/N_s\) and \(P_{in}=P_{out}\) in an ideal case.
Induction and transformers Stretch
This page covers the key ideas for 4.7.3 – induction, alternators, dynamos, microphones and transformers. It highlights common exam traps and shows how the concepts link to other topics such as power transmission and electric circuits.
Key points
An electromotive force (emf) is produced when a conductor moves through a magnetic field or the flux changes around a fixed conductor.
The size of the induced emf is proportional to B, l, v for a straight wire, or N ΔΦ/Δt for a coil.
Lenz’s law tells you the direction: the induced current always creates a magnetic field that opposes the change that produced it.
If the circuit is complete, the induced emf drives a current; its own magnetic field generates a back‑EMF that limits the growth of the induced current.
An alternator uses a rotating coil in a constant field; as each pole passes a fixed point the polarity reverses so the output voltage varies sinusoidally (AC).
A dynamo also has a rotating coil but rectifies the induced AC so that the output current flows only one way (DC).
Watch out for
Confusing the applied voltage with the induced emf – remember the emf is produced by motion, not supplied.
Assuming a DC transformer works; transformers require an AC primary to create a changing flux.
Remember: In an ideal transformer Vp/Vs = Np/Ns and P_in = P_out; thus I_p/I_s = N_s/N_p – higher voltage gives lower current for the same power, which is why electricity is transmitted at high potential differences to reduce losses.
✏️ Try 3 quick questions
Which law explains the magnetic field produced by an induced current that opposes the change in a conductor?
A transformer supplies 120 W to a load at 12 V. The turns ratio of the primary to secondary is 10 : 1. Assuming 100 % efficiency, what is the current drawn from the mains? Give your answer in amperes.
If the magnetic flux through each turn changes at a rate of 0.02 Wb s⁻¹ and there are 30 turns, what is the magnitude of the induced emf in volts?
There are more on this in 4 Triangles, with hints and worked answers, and real past-paper questions. Carry on there.
Practise it with real exam questions
4 Triangles has quick questions on induction and transformers, real GCSE past-paper questions with their mark schemes, and a revision plan that picks what to work on next.
Questions on this topic for a lesson, homework or revision - a quick "do now", misconception questions, small steps that change one thing at a time, and practice, with answers on the last page.