Revision › Internal energy and latent heat › Worksheet

Internal energy and latent heat Easy

GCSE Physics · Particle Model of Matter · Name ____________________ Date ________

Builds on: Density and changes of state, Gas pressure, Pressure in fluids

Do now

Quick questions on earlier topics - to get your brain going.

  1. What is the density of a material if it has a mass of 8 kg and a volume of 2 m³? Express your answer in kg/m³. [1]

  2. During the density experiment with an irregular object, which of the following must be done to ensure accurate volume measurement? [1]

    1. D) Add salt to increase density
    2. C) Use a thermometer to measure temperature during measurement
    3. B) Record the water level before and after submerging the object
    4. A) Weigh the object inside the water
  3. A container of gas has a volume of 0.10 m³ and is at a pressure of 80 kPa. The temperature is kept constant while the pressure increases to 160 kPa. What is the new volume of the gas? Provide your answer in m³. [1]

  4. Air occupies a fixed volume of 0.02 m³ at a pressure of 100 kPa. If the temperature is kept constant and the pressure is raised to 250 kPa, what will the new volume be? Give your answer in m³. [1]

Practice

  1. Calculate the change in thermal energy (ΔE) when 0.3 kg of iron is heated from 25 °C to 40 °C. The specific heat capacity of iron is 450 J kg⁻¹ °C⁻¹. Give your answer in joules to the nearest joule. [1]

  2. In ∆E = mc∆θ, what does the symbol ‘c’ represent? [1]

  3. Which quantity is needed to raise one kilogram of a substance by one degree Celsius? [1]

  4. Which quantity is not used in the equation ∆E = m × c × ∆θ? A) mass B) specific heat capacity C) density D) temperature change [1]

    1. C) density
    2. A) mass
    3. D) temperature change
    4. B) specific heat capacity
  5. What term describes the total kinetic and potential energy of all particles in a system? [1]

  6. If 8000 J of energy is supplied to melt 0.4 kg of ice (latent heat of fusion 334 kJ kg⁻¹), calculate the specific latent heat L used in this experiment. ∴ L = E ÷ m [1]

  7. Which substance has the highest specific heat capacity? A) Water 4180 J kg⁻¹ °C⁻¹ B) Aluminium 900 J kg⁻¹ °C⁻¹ C) Ice 2100 J kg⁻¹ °C⁻¹ D) Gold 129 J kg⁻¹ °C⁻¹ [1]

    1. Water 4180 J kg⁻¹ °C⁻¹
    2. Aluminium 900 J kg⁻¹ °C⁻¹
    3. Ice 2100 J kg⁻¹ °C⁻¹
    4. Gold 129 J kg⁻¹ °C⁻¹
  8. Which of the following is an important safety precaution when measuring the latent heat of fusion of water in a calorimeter? A) Use a well‑insulated calorimeter B) Keep the lid open to allow steam escape C) Stir the mixture vigorously with a metal rod D) Record data immediately after each addition [1]

    1. Stir the mixture vigorously with a metal rod
    2. Use a well‑insulated calorimeter
    3. Record data immediately after each addition
    4. Keep the lid open to allow steam escape
  9. Which specific latent heat relates to the solid‑to‑liquid transition? [1]

  10. What energy is required to change a substance’s state while its temperature remains constant? [1]

Stretch

A step up - try these if you finish.

  1. Which of the following best describes latent heat? A. Energy stored as potential energy only. B. Energy required for a change of state at constant temperature. C. Energy released when a substance freezes. D. Energy needed to increase the mass of a substance. [1]

    1. A
    2. D
    3. C
    4. B
  2. The specific latent heat of fusion of ice is 334 kJ kg⁻¹. How many kilograms of ice melt when 1000 kJ of energy is supplied? Give your answer to one decimal place. [1]

  3. Which statement is incorrect about heating water? A. Heat added increases temperature until 100 °C. B. Once 100 °C is reached, all further heat causes phase change to steam. C. No temperature change occurs during boiling if heat continues to be supplied. D. Water will instantly turn into steam at 100 °C regardless of pressure. [1]

    1. B
    2. A
    3. C
    4. D
  4. What must be used in an experiment measuring the latent heat of fusion of water to minimise heat loss? A. A heat‑insulated calorimeter. B. Adding salt to increase boiling point. C. Cooling the water before heating. D. Using a larger beaker to maximise surface area. [1]

    1. D
    2. A
    3. B
    4. C

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which of the following statements correctly describes a force? [1]

    1. It has both magnitude and direction.
    2. It has magnitude only.
    3. It is always contact.
    4. It cannot be represented by an arrow.
    (Forces, weight and resultant force)
  2. Name one example of a contact force. [1]

    (Forces, weight and resultant force)
  3. A force of 5 N stretches a spring by 0.20 m. Find the spring constant k. (Give your answer in N/m) [1]

    (Springs and elasticity)
  4. What are the units of a spring constant? [1]

    (Springs and elasticity)
  5. According to PV = constant (fixed mass at constant T), what happens to pressure when the volume is doubled? [1]

    (Gas pressure)
  6. A hand pump exerts a normal force of \(120\,\text{N}\) over an area of \(0.6\,\text{m}^2\). What is the pressure on the surface? Give your answer in pascals to the nearest integer. [1]

    (Pressure in fluids)

💼 Where it leads: Solar panel installer · Insulation engineer · Heat pump engineer · Gas service technician - more

Stuck, or finished? Scan for help on internal energy and latent heat - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. 4
  2. C B) Record the water level before and after submerging the object
  3. 0.05
  4. 0.008
  5. 2025
  6. specific heat capacity
  7. specific heat capacity
  8. A C) density
    Only m, c and ∆θ appear.
  9. internal energy
  10. 20000 J kg⁻¹
    L=8000÷0.4=20,000 J kg⁻¹
  11. A Water 4180 J kg⁻¹ °C⁻¹
    Highest value is water.
  12. B Use a well‑insulated calorimeter
    Insulation reduces heat loss to surroundings.
  13. fusion
  14. latent heat
  15. D B
  16. 3
  17. D D
  18. B A
  19. A It has both magnitude and direction.
    A force is a vector quantity, so it must have both magnitude and direction.
  20. friction
  21. 25
  22. N/m
  23. Halved.
  24. 200
    p = F/A = 120/0.6 = 200 Pa

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on internal energy and latent heat - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk