Revision › GCSE Physics › Forces

Pressure in fluids

GCSE Physics · Forces. Explained 3 ways - start with the one that suits you.

Pressure in fluids Start here

A quick guide to key ideas and a sample answer for GCSE Physics.

Key words

fluid
a liquid or gas that can flow
pressure
force acting perpendicular to a surface

Key points

  • Pressure is the force that pushes straight on a surface, at right angles.
  • In any fluid, pressure equals force divided by area, \(p=F/A\); unit Pa = N/m².
  • In a liquid, depth adds weight; \(p=\rho gh\) where ρ is density.
  • A submerged object gets higher pressure on its bottom than top, giving upthrust upwards.

Watch out for

  • None

Remember: Use these steps to explain or answer similar questions. Good luck!

Pressure in fluids Core

For GCSE physics you must remember how pressure is produced and how it changes with depth or height.

Key points

  • A fluid can be either a liquid or a gas; both obey the same basic rule.
  • The force that a fluid exerts on any surface acts normal (perpendicular) to that surface.
  • For any fluid, pressure is calculated as p = F / A , where p is in pascals (Pa), F in newtons (N) and A in square metres (m²).
  • In a liquid the pressure at a point increases with depth because more fluid lies above it.
  • The weight of that extra fluid column gives p = h ρ g , h being height in metres, ρ density in kg m⁻³ and g the local gravitational field strength (≈9.81 m s⁻²).
  • If pressure at one depth known, Δp=Δhρg gives change (ρ,g constants). Submerged objects feel higher bottom pressure; this up‑thrust decides float/sink based on density relative to surrounding fluid. Atmospheric pressure comes from air weight above a surface and falls with altitude.

Watch out for

  • Do not describe how the question is framed in exam language.
  • Avoid any mention of marks or box numbers outside the worked example.

Remember: Keep all maths written with LaTeX inside \(\). Use British units and conventions only.

Pressure in fluids Stretch

Pressure is the normal (perpendicular) force a fluid exerts on any surface, quantified by p=F/A. In liquids this rises with depth because each layer adds weight; in gases it falls with altitude as air mass above decreases.

Key words

pressure
force per unit area acting normal to a surface
fluid
any substance that continuously deforms under shear stress – liquid or gas
density
mass per unit volume (kg/m³)

Key points

  • Pressure always acts perpendicular to the surface it contacts.
  • For any fluid the basic relation is p = F/A; the same equation applies to liquids and gases.
  • In a static column of liquid the extra weight gives p = ρgh, where h is depth, ρ density and g ≈9.81 m/s².
  • Thus the pressure difference between two depths Δp = ρgΔh – useful for calculating depths from pressure changes.
  • A submerged body feels a larger pressure on its bottom than on its top; the net upward force (upthrust) depends only on the displaced fluid volume, not shape.
  • Whether an object floats or sinks is governed by its density relative to that of the surrounding fluid – not simply by size or shape.

Watch out for

  • When converting kPa to Pa multiply by 1000 – a common slip is to forget this step.
  • In p = ρgh always use the same units: kg/m³ for density, m/s² for g and metres for depth; mismatched units give wrong answers.
  • For a pressure difference you must subtract, not add, pressures – the formula Δp = ρgΔh already accounts for the change, so no extra subtraction is required.

Remember: Pressure at any point depends only on depth, density and gravity, not container shape.

✏️ Try 3 quick questions

  1. A hand pump exerts a normal force of \(120\,\text{N}\) over an area of \(0.6\,\text{m}^2\). What is the pressure on the surface? Give your answer in pascals to the nearest integer.

  2. Which of the following is a necessary safety precaution when measuring atmospheric pressure with a barometer?

  3. Which footwear will exert a greater pressure on the ground per unit area? A Snowshoes with an area of 0.5 m². B High‑heeled shoes with an area of 0.05 m². C Bare feet with an area of 0.1 m². D All footwear exert the same pressure if weight is equal.

Practise it with real exam questions

4 Triangles has quick questions on pressure in fluids, real GCSE past-paper questions with their mark schemes, and a revision plan that picks what to work on next.

Try the quick questions

📝 Worksheets and a knowledge organiser to print

Questions on this topic for a lesson, homework or revision - a quick "do now", misconception questions, small steps that change one thing at a time, and practice, with answers on the last page.

Easy Medium Hard 📄 Knowledge organiser

🔤 Key words to know

Pressure
produced by the forces from particles within a fluid acting on each other or on a surface.
Particles
atoms or molecules that make up matter.
Upthrust
a force acting upwards on an object in a liquid due to pressure differences between the top and bottom surface.
Density
the mass per unit volume of a substance; a less dense substance will float on top of a more dense one.
Atom
the building block of matter; even small pieces of matter have trillions of atoms.
Particle
a term used to describe atoms or molecules which make up matter.
Fluid
a liquid or a gas; fluids can flow as the particles can move around each other.

Many definitions from Oak National Academy (Open Government Licence).

When it's usually taught: Year 10 - Particle explanations of density and pressure.

💼 Where it could take you

Jobs where people use this every day - whichever way you go after school.

Straight from school or an apprenticeship

With college or an advanced apprenticeship

With a degree

Each job opens its National Careers Service profile: what it pays, the hours, and how to get in.

📺 Watch a lesson on this

Each is a science lesson by Oak National Academy licensed under Open Government Licence (OGL). Lessons open on Oak National Academy's site.

More on Forces