Revision › Mains electricity and safety › Worksheet

Mains electricity and safety Hard

GCSE Physics · Electricity · Name ____________________ Date ________

Builds on: Current, potential difference and resistance, Series and parallel circuits

Do now

Quick questions on earlier topics - to get your brain going.

  1. A battery supplies 12 V. A resistor of unknown resistance is connected, producing a current of 0.4 A. Calculate the resistance using V = IR. [1]

  2. Which step should you do before measuring the resistance of a component with an ohmmeter? [1]

    1. ☐ Connect one lead across the component's terminals only
    2. ☐ Place the component in the circuit to maintain its temperature
    3. ☐ Heat the component to 100 °C
    4. ☐ Remove the component from any power supply and ensure it is disconnected from other circuits
  3. In a series circuit, what quantity is the same through every component? [1]

  4. Tick one box: Which statement about a series circuit is correct? [1]

    1. A) The total resistance equals the product of the resistances.
    2. B) The same current flows through every component.
    3. C) Each resistor has a different voltage drop regardless of size.
    4. D) The power supply's potential difference is divided equally among all components.

Practice

  1. In a three‑core cable the live wire is colour coded for easy identification. Which colour covers the live wire? [1]

    1. ☐ Orange
    2. ☐ Green and yellow
    3. ☐ Blue
    4. ☐ Brown
  2. A kettle with a power rating of 2 kW is used for 15 minutes to boil water. How much energy in kilojoules does it transfer? (Give your answer as an integer.) [2]

  3. A hairdryer has a power rating of 1500 W and is connected to the UK mains supply. What current does it draw? (Give your answer in amperes, rounded to two decimal places.) [2]

  4. What is the main purpose of the earth wire in a three‑core cable? Tick one box. [1]

    1. ☐ To complete the circuit between live and neutral
    2. ☐ To increase the mains frequency
    3. ☐ To supply voltage to appliances
    4. ☐ To provide a safe path for fault current to ground
  5. An electric heater rated at 2400 W is used for 2 hours during a heating period. How many kilowatt‑hours of energy are transferred? (Give your answer to two decimal places.) [2]

  6. The potential difference between the live wire and earth is about 230 V in the UK mains supply. What is the approximate potential difference between the neutral wire and earth? [1]

    1. ☐ 115 V
    2. ☐ 230 V
    3. ☐ 460 V
    4. ☐ 0 V
  7. A hair dryer draws a current of 4 A from the mains supply. Calculate its power consumption. Use \(P = V\times I\) where \(V = 230\,V\). [2]

  8. Which component in a plug protects the appliance from over‑current? [1]

    1. Neutral wire
    2. Earth wire
    3. Live wire
    4. Fuse
  9. An electric heater uses 1800 W on the mains supply. What current does it draw? Round your answer to the nearest whole ampere. [2]

  10. Between which of the following does the live wire have a higher potential difference relative to earth? [1]

    1. Both are equal
    2. The mains supply at 230 V
    3. A 12 V battery
    4. Neither has a potential difference
  11. Which colour is the insulation covering the earth wire inside a three‑core cable? [1]

    1. Orange
    2. Blue
    3. Green and yellow stripes
    4. Brown
  12. A kettle is connected to mains electricity with a three‑core cable. Which wire connects to the neutral point inside the appliance? [1]

    1. Live
    2. All of the above
    3. Earth
    4. Neutral

Exam practice

Real past-paper questions on mains electricity and safety, with their mark schemes, are in 4 Triangles - free to practise.

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. For two resistors of 4 Ω and 6 Ω, which statement correctly compares their total resistance when wired in series versus in parallel? [2]

    1. a) The series arrangement gives a smaller total resistance than the parallel arrangement.
    2. b) The parallel arrangement gives a larger total resistance than the series arrangement.
    3. c) The total resistance is the same for both arrangements.
    4. d) The parallel arrangement gives a smaller total resistance than the series arrangement.
    (Series and parallel circuits)
  2. Which of the following statements about transformers is false? (Choose one) [1]

    1. A) A step‑up transformer increases voltage and decreases current in the transmission line.
    2. B) A step‑down transformer reduces voltage for domestic use, increasing current proportionally.
    3. C) Transformers are lossless devices; all electrical energy is transferred from primary to secondary.
    4. D) The ratio of voltages equals the ratio of turns on the windings.
    (Power and the National Grid)
  3. Which of the following best defines a renewable energy resource? [1]

    1. A) An energy source that produces no waste when used.
    2. B) A natural resource that can be replenished in a short period relative to human use.
    3. D) Any form of energy that can be converted into electricity.
    4. C) An energy source derived exclusively from fossil fuels.
    (Energy resources)
  4. In a parallel circuit, which statement is incorrect? [2]

    1. D) The total resistance is less than each individual resistor.
    2. B) The potential difference across each branch is the same.
    3. C) Adding more resistors increases the total current.
    4. A) The current through each component is equal.
    (Series and parallel circuits)
  5. Which energy resource is generally considered more reliable for continuous supply? [1]

    1. Wind
    2. Biomass
    3. Solar
    4. Nuclear
    (Energy resources)
  6. When power is transmitted over long distances at high voltage, which of the following statements is true? (Choose one) [1]

    1. B) The voltage drop across the cable is larger, reducing efficiency.
    2. A) The current in the cable is higher, increasing I²R losses.
    3. D) Both voltage and current remain unchanged compared to domestic supply.
    4. C) The current is lower, so resistive losses are smaller.
    (Power and the National Grid)

💼 Where it leads: Smart meter installer · Electricity distribution worker · Electrician · Auto electrician - more

Stuck, or finished? Scan for help on mains electricity and safety - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. 30
  2. D ☐ Remove the component from any power supply and ensure it is disconnected from other circuits
  3. current
  4. B B) The same current flows through every component.
  5. D ☐ Brown
  6. 1800
    t=15 min = 900 s, E=P·t=2000×900=1 800 000 J = 1800 kJ
  7. 6.52
    Use P=VI → I=P/V = 1500/230 = 6.5217… A.
  8. D ☐ To provide a safe path for fault current to ground
  9. 4.8
    t=2 h = 7200 s, E=P·t=2400×7200=17 280 000 J = 4.80 kWh
  10. D ☐ 0 V
  11. 920
  12. D Fuse
  13. 8
  14. B The mains supply at 230 V
  15. C Green and yellow stripes
  16. D Neutral
  17. D d) The parallel arrangement gives a smaller total resistance than the series arrangement.
  18. C C) Transformers are lossless devices; all electrical energy is transferred from primary to secondary.
  19. B B) A natural resource that can be replenished in a short period relative to human use.
  20. D A) The current through each component is equal.
  21. D Nuclear
  22. D C) The current is lower, so resistive losses are smaller.

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on mains electricity and safety - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk