Revision › Pressure in fluids › Worksheet
Pressure in fluids Hard
GCSE Physics · Forces · Name ____________________ Date ________
Builds on: Gas pressure
Do now
Quick questions on earlier topics - to get your brain going.
What is the density of a material if it has a mass of 8 kg and a volume of 2 m³? Express your answer in kg/m³. [1]
During the density experiment with an irregular object, which of the following must be done to ensure accurate volume measurement? [1]
- D) Add salt to increase density
- C) Use a thermometer to measure temperature during measurement
- B) Record the water level before and after submerging the object
- A) Weigh the object inside the water
A container of gas has a volume of 0.10 m³ and is at a pressure of 80 kPa. The temperature is kept constant while the pressure increases to 160 kPa. What is the new volume of the gas? Provide your answer in m³. [1]
Air occupies a fixed volume of 0.02 m³ at a pressure of 100 kPa. If the temperature is kept constant and the pressure is raised to 250 kPa, what will the new volume be? Give your answer in m³. [1]
Practice
Which footwear will exert a greater pressure on the ground per unit area? A Snowshoes with an area of 0.5 m². B High‑heeled shoes with an area of 0.05 m². C Bare feet with an area of 0.1 m². D All footwear exert the same pressure if weight is equal. [1]
- D
- C
- B
- A
Which statement correctly describes how pressure changes with depth in a liquid? A The pressure at the bottom of a water column is independent of its height. B The pressure increases with the height of the fluid column. C Pressure depends only on density, not on height. D Increasing the gravitational field strength has no effect on pressure. [1]
- D
- A
- B
- C
When measuring pressure inside a sealed container with a pressure gauge, which of the following is essential? A The gauge must be calibrated in atmospheres. B The gauge should not exceed the expected maximum pressure. C The gauge can be inserted at any time. D The gauge is only accurate if placed at the top. [1]
- B
- C
- A
- D
A fluid exerts a force of 120 N over an area of 3 m². What is the pressure on the surface? [1]
A laboratory experiment requires measuring the pressure exerted by a liquid column on a submerged piston using a manometer. Which of the following is essential for accurate readings? A The piston must be perfectly spherical. B The fluid used must have a density exactly equal to that of water. C The manometer should be calibrated before each measurement. D The experiment can be carried out at any temperature. [1]
- C
- D
- B
- A
Which statement best defines "upthrust"? A The downward force on a submerged object. B The upward force exerted by a fluid on a submerged object. C Pressure difference between top and bottom surfaces of an object. D Force due to the weight of the fluid. [1]
- C
- D
- B
- A
Which of the following is a necessary safety precaution when measuring atmospheric pressure with a barometer? [1]
- Use a high‑altitude environment for accuracy.
- Avoid calibrating it regularly.
- Keep the barometer in direct sunlight.
- Ensure the barometer has no air leaks.
A fluid exerts a force of 80 N over an area of 0.5 m². Calculate the pressure on the surface. Give your answer to the nearest Pa. [1]
Which of these statements correctly compares atmospheric pressure at sea level and at 10 000 m altitude? [1]
- Pressure increases with altitude due to higher temperature.
- Pressure is higher at 10 000 m because air molecules are denser.
- Pressure is lower at 10 000 m because there is less air above the surface.
- Pressure is the same at both heights because gravity pulls the same weight of air.
Which of the following statements is a common misconception about pressure applied by footwear? [1]
- Wearing high‑heeled shoes increases pressure on the ground because they concentrate force on a smaller area.
- A person walking barefoot can feel more pain stepping on a stone compared with standing in high heels, because the force is distributed over a large area.
- The pressure applied by a person in flats is higher than when wearing snow boots, because snow boots have a larger surface area.
- When a person steps on another's foot wearing flat shoes, the pressure transmitted to that foot is lower than when they step while wearing high‑heels.
An airbag inflates the seat of a car providing an upward pressure of 250 kPa over an area of 0.3 m² on the passenger's back. Calculate the upward force exerted by the airbag. Give your answer to the nearest newton. [1]
Which of the following statements is correct regarding how pressure varies with depth in a fluid? [1]
- Pressure decreases linearly with depth because there is less fluid above.
- Pressure only depends on temperature, not on depth.
- Pressure increases linearly with depth because the weight of the liquid column increases.
- Pressure remains constant at all depths because the fluid exerts equal force in all directions.
Exam practice
Real past-paper questions on pressure in fluids, with their mark schemes, are in 4 Triangles - free to practise.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
A sealed container holds 5.0 g of carbon dioxide gas that occupies a volume of 400 cm³. Calculate the density in kg / m³, rounded to one decimal place. [2]
(Density and changes of state)A piece of aluminium has a mass of 3.6 g and occupies a volume of 1.4 cm³. Calculate its density in kg m⁻³, rounded to the nearest whole number. [2]
(Density and changes of state)Which process will increase the internal energy of a closed system? A. Cooling the system B. Increasing its pressure while keeping temperature constant C. Heating the system D. Adding mass to the system [1]
- Heating the system
- Adding mass to the system
- Increasing its pressure while keeping temperature constant
- Cooling the system
A sealed piston contains a fixed mass of gas at an initial pressure of 200 kPa and volume of 0.05 m³. The pressure is increased to 300 kPa while the temperature remains constant. Using Boyle’s law, calculate the new volume of the gas. Give your answer to one decimal place in litres. [2]
(Gas pressure)When measuring the pressure of a gas with a manometer, which practice is essential for an accurate reading? Tick one box. [1]
- ☐ Ensure the instrument is level.
- ☐ Use an unsealed container.
- ☐ Keep the temperature constant.
- ☐ Measure at the mid‑point of the tube.
Which definition correctly describes latent heat? A. The amount of energy required to raise the temperature of a substance by 1 °C. B. Energy supplied that changes the internal energy without changing temperature during a phase change. C. Energy needed to compress a gas at constant volume. D. Heat lost by a body in thermal equilibrium with its surroundings. [1]
- Energy needed to compress a gas at constant volume.
- Heat lost by a body in thermal equilibrium with its surroundings.
- Energy supplied that changes the internal energy without changing temperature during a phase change.
- The amount of energy required to raise the temperature of a substance by 1 °C.
Still going? Unlimited questions on pressure in fluids, marked as you go: 4triangles.co.uk
💼 Where it leads: Plumber · Baker · Heating and ventilation engineer · Commercial diver - more
Stuck, or finished? Scan for help on pressure in fluids - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- 4
- C B) Record the water level before and after submerging the object
- 0.05
- 0.008
- C B
- C B
- A B
- 40
- A C
- C B
- D Ensure the barometer has no air leaks.
- 160
- C Pressure is lower at 10 000 m because there is less air above the surface.
- B A person walking barefoot can feel more pain stepping on a stone compared with standing in high heels, because the force is distributed over a large area.
- 75000
- C Pressure increases linearly with depth because the weight of the liquid column increases.
- 12.5
5 g = 0.005 kg; 400 cm³ = 4×10⁻⁴ m³; density = 0.005 ÷ 4×10⁻⁴ = 12.5 kg/m³. - 2570
- A Heating the system
- 33.3
p₁V₁ = p₂V₂ → V₂ = (p₁V₁)/p₂ = (200 kPa × 0.05 m³)/(300 kPa) = 0.0333 m³ = 33.3 L - A ☐ Ensure the instrument is level.
- C Energy supplied that changes the internal energy without changing temperature during a phase change.
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on pressure in fluids - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk