Revision › Series and parallel circuits › Worksheet

Series and parallel circuits Hard

GCSE Physics · Electricity · Name ____________________ Date ________

Builds on: Static electricity

Do now

Quick questions on earlier topics - to get your brain going.

  1. A spark transfers energy of 0.12 J and moves a charge of 4 µC from one object to another. What is the potential difference between the two objects? (Give your answer in volts, rounded to the nearest whole number). [1]

  2. Which of the following statements about elementary particles is correct? [1]

    1. Electrons are positively charged and protons are negatively charged.
    2. Both electrons and protons are neutrally charged.
    3. Neutrons carry a positive charge while protons are neutral.
    4. Protons have a positive charge, electrons have a negative charge, and neutrons are neutral.
  3. A battery supplies 12 V. A resistor of unknown resistance is connected, producing a current of 0.4 A. Calculate the resistance using V = IR. [1]

  4. Which step should you do before measuring the resistance of a component with an ohmmeter? [1]

    1. ☐ Connect one lead across the component's terminals only
    2. ☐ Place the component in the circuit to maintain its temperature
    3. ☐ Heat the component to 100 °C
    4. ☐ Remove the component from any power supply and ensure it is disconnected from other circuits

Practice

  1. For two resistors of 4 Ω and 6 Ω, which statement correctly compares their total resistance when wired in series versus in parallel? [2]

    1. a) The series arrangement gives a smaller total resistance than the parallel arrangement.
    2. b) The parallel arrangement gives a larger total resistance than the series arrangement.
    3. c) The total resistance is the same for both arrangements.
    4. d) The parallel arrangement gives a smaller total resistance than the series arrangement.
  2. In a parallel circuit, which statement is incorrect? [2]

    1. D) The total resistance is less than each individual resistor.
    2. B) The potential difference across each branch is the same.
    3. C) Adding more resistors increases the total current.
    4. A) The current through each component is equal.
  3. Which of the following statements correctly compares total resistance in series and parallel circuits? [2]

    1. C) Both configurations give the same total resistance if resistors are equal.
    2. D) The relationship depends on the number of components.
    3. A) Total resistance in series is always greater than that in parallel with the same resistors.
    4. B) Total resistance in parallel is always greater than that in series with the same resistors.
  4. Which of the following is true for a series circuit? [2]

    1. D) The total voltage equals the sum of all currents.
    2. A) The potential difference across each resistor is the same.
    3. B) The total resistance equals the largest resistor.
    4. C) The current through each component is the same.
  5. A street lighting circuit contains several LED bulbs connected in a configuration that combines series and parallel connections. Which statement best explains why the LEDs appear brighter compared to a simple series arrangement with the same supply voltage? [2]

    1. D) The brightness is unrelated to circuit configuration.
    2. C) Combining series and parallel increases the total number of LEDs illuminated at once.
    3. A) Parallel branches reduce the total resistance, allowing more current for each LED.
    4. B) Series connection increases the potential difference across each LED, making them brighter.
  6. Adding a second resistor in series to an existing circuit will _______. [1]

    1. C) decrease the total current from the battery
    2. D) double the resistance of each individual resistor
    3. A) increase the total current from the battery
    4. B) leave the voltage across each component unchanged
  7. In a series circuit the current is _______. [1]

    1. D) unpredictable
    2. C) zero across all components
    3. B) greater in components with higher resistance
    4. A) the same through each component
  8. A 12 V battery is connected to two resistors in series, R₁ = 4 Ω and R₂ = 6 Ω. Using the key equation for total resistance and Ohm’s law, calculate the current flowing through the circuit, expressed in milliamperes (mA) rounded to the nearest whole number. [1]

  9. Two resistors of 9 Ω and x Ω are connected in series to an 18 V battery. If the total resistance of the circuit is 15 Ω, calculate the current flowing through the circuit in amperes (A) rounded to two decimal places. [1]

  10. A 5 V LED is connected in series with a 200 Ω resistor. What is the current through the LED, expressed in milliamperes (mA) to the nearest whole number? [1]

  11. Which of the following should be done before connecting a new component to an existing circuit? [1]

    1. D) Disconnect all components first
    2. A) Increase the supply voltage
    3. B) Turn off the power source
    4. C) Add more resistors in series

Exam practice

Real past-paper questions on series and parallel circuits, with their mark schemes, are in 4 Triangles - free to practise.

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which of the following best defines an ion? [1]

    1. A neutral atom with balanced protons and electrons.
    2. A particle that has no charge.
    3. A molecule consisting of two atoms bonded together.
    4. A particle that carries a positive or negative electric charge due to loss or gain of electrons.
    (Static electricity)
  2. Which of the following statements about transformers is false? (Choose one) [1]

    1. A) A step‑up transformer increases voltage and decreases current in the transmission line.
    2. B) A step‑down transformer reduces voltage for domestic use, increasing current proportionally.
    3. C) Transformers are lossless devices; all electrical energy is transferred from primary to secondary.
    4. D) The ratio of voltages equals the ratio of turns on the windings.
    (Power and the National Grid)
  3. Which of the following is a common misconception about electric fields? [1]

    1. Electric fields can exist in a vacuum.
    2. Electric fields are only present inside conductors.
    3. The strength of an electric field decreases with distance.
    4. Only charged objects produce electric fields.
    (Static electricity)
  4. In a three‑core cable the live wire is colour coded for easy identification. Which colour covers the live wire? [1]

    1. ☐ Orange
    2. ☐ Green and yellow
    3. ☐ Blue
    4. ☐ Brown
    (Mains electricity and safety)
  5. A kettle with a power rating of 2 kW is used for 15 minutes to boil water. How much energy in kilojoules does it transfer? (Give your answer as an integer.) [2]

    (Mains electricity and safety)
  6. When power is transmitted over long distances at high voltage, which of the following statements is true? (Choose one) [1]

    1. B) The voltage drop across the cable is larger, reducing efficiency.
    2. A) The current in the cable is higher, increasing I²R losses.
    3. D) Both voltage and current remain unchanged compared to domestic supply.
    4. C) The current is lower, so resistive losses are smaller.
    (Power and the National Grid)

💼 Where it leads: Smart meter installer · Electricity distribution worker · Electrician · Auto electrician - more

Stuck, or finished? Scan for help on series and parallel circuits - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. 30000
  2. D Protons have a positive charge, electrons have a negative charge, and neutrons are neutral.
  3. 30
  4. D ☐ Remove the component from any power supply and ensure it is disconnected from other circuits
  5. D d) The parallel arrangement gives a smaller total resistance than the series arrangement.
  6. D A) The current through each component is equal.
  7. C A) Total resistance in series is always greater than that in parallel with the same resistors.
  8. D C) The current through each component is the same.
  9. C A) Parallel branches reduce the total resistance, allowing more current for each LED.
  10. A C) decrease the total current from the battery
  11. D A) the same through each component
  12. 1200
  13. 1.2
  14. 25
  15. C B) Turn off the power source
  16. D A particle that carries a positive or negative electric charge due to loss or gain of electrons.
  17. C C) Transformers are lossless devices; all electrical energy is transferred from primary to secondary.
  18. B Electric fields are only present inside conductors.
  19. D ☐ Brown
  20. 1800
    t=15 min = 900 s, E=P·t=2000×900=1 800 000 J = 1800 kJ
  21. D C) The current is lower, so resistive losses are smaller.

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on series and parallel circuits - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk