Revision › GCSE Physics › Forces

Springs and elasticity

GCSE Physics · Forces. Explained 3 ways - start with the one that suits you.

Springs and elasticity Start here

Remember these quick ideas to tackle questions about springs.

Key words

elastic
able to return to its original shape after force removed.
inelastic
does not return; permanent change after force removed.
Hooke’s law
force equals spring constant times extension, only up to the elastic limit.
spring constant (k)
stiffness of a spring, in newtons per metre (N m⁻¹).

Key points

  • Forces that stretch, bend, compress come from gravity, applied pulls/pushes, normal and friction forces.
  • A stationary object needs more than one force; opposing forces create internal stresses.
  • Elastic deformation recovers shape; inelastic stays changed after force removed.
  • Hooke’s law: F = kx; work done equals ½kx² within elastic limit.

Watch out for

  • Always check the limit of proportionality; beyond it Hooke’s law fails.

Remember: Use the simple difference for any bungee‑cord or spring extension when asked.

Springs and elasticity Core

A quick refresher for GCSE Physics on springs, Hooke’s law, energy in elastic systems and a worked example from the spec.

Key points

  • List the forces that can stretch (tension), bend or compress an object – gravity, applied pulls or pushes, normal and frictional forces are all examples.
  • Explain why a stationary object's shape changes only when two or more external forces act in different directions – this creates internal stresses even though the net force may be zero.
  • Distinguish elastic deformation (shape returns when load removed) from inelastic (plastic) deformation (permanent change).
  • State Hooke’s law for springs within its limit of proportionality: \(F = kx\), where \(k\) is the spring constant and \(x\) the extension or compression.
  • Note that a larger \(k\) means a stiffer spring – it takes more force to achieve the same change in length.
  • Identify a linear force‑extension graph as a straight line through the origin; any curvature indicates non‑linear, possibly plastic behaviour.

Watch out for

  • Use the spring constant of both cords together when they act in parallel.

Remember: Work done on a spring becomes elastic potential energy only while it is in the linear (Hookean) regime; beyond the proportionality limit some work turns into heat or deformation.

Springs and elasticity Stretch

You’ll often need to work out how much energy a spring stores and how high something can rise when that energy turns into gravitational potential energy. The trick is remembering the springs act together, keeping units straight, and using Hooke’s law only up to the limit of proportionality.

Key points

  • Hooke’s law (linear) says F = kx for a spring in its elastic range.
  • When two identical springs are attached in parallel the total constant is the sum: k_total = k₁ + k₂.
  • The elastic potential energy stored in a compressed or stretched spring is Ee = ½ k_total x²; use the extension of each spring, not the half‑extension.
  • Conservation of mechanical energy gives Ee (spring) = mg h at maximum height, because all elastic work becomes gravitational potential energy.
  • Solve for h: h = Ee / (m g); check that you divide by the product m g, not just g.

Watch out for

  • Do not forget to double the spring constant when two springs act in parallel.
  • Use the full extension of each cord, not half or a combined value that assumes series arrangement.
  • Check units: Ee comes out in joules (N m) and mg h is also N m; this confirms you’ve used g = 9.8 N kg⁻¹ correctly.

Remember: These steps link to the work‑energy theorem, the definition of elastic potential energy, and basic force concepts like tension in a spring. Master them and you’ll tackle any related GCSE question with confidence.

✏️ Try 3 quick questions

  1. A force of 5 N stretches a spring by 0.20 m. Find the spring constant k. (Give your answer in N/m)

  2. Which of the following is a necessary safety measure when performing the spring‑extension experiment?

  3. Which of the following precautions is most important when measuring the spring constant using a hanging‑mass apparatus?

Practise it with real exam questions

4 Triangles has quick questions on springs and elasticity, real GCSE past-paper questions with their mark schemes, and a revision plan that picks what to work on next.

Try the quick questions

📝 Worksheets and a knowledge organiser to print

Questions on this topic for a lesson, homework or revision - a quick "do now", misconception questions, small steps that change one thing at a time, and practice, with answers on the last page.

Easy Medium Hard 📄 Knowledge organiser

🔤 Key words to know

Elastic deformation
The stretch of a spring that returns to its original shape when the stretching force is removed.
Inelastic deformation
The stretch of a spring as it is permanently stretched out of shape.
Directly proportional
A variable is directly proportional to another if it doubles or triples when the other one does the same.
Spring constant
A measure of how stiff a spring is and how hard it is to stretch or compress.
Hooke’s Law
For elastic deformations, extension (or compression) is directly proportional to the force applied.
Extension
The increase from the original length of a spring when it is stretched.
Limit of proportionality
The largest extension of a spring before it is stretched out of shape.

Many definitions from Oak National Academy (Open Government Licence).

When it's usually taught: Year 11 - Forces make things change.

💼 Where it could take you

Jobs where people use this every day - whichever way you go after school.

Straight from school or an apprenticeship

With college or an advanced apprenticeship

With a degree

Each job opens its National Careers Service profile: what it pays, the hours, and how to get in.

📺 Watch a lesson on this

Each is a science lesson by Oak National Academy licensed under Open Government Licence (OGL). Lessons open on Oak National Academy's site.

More on Forces