To keep your environment tidy, we compare products over their whole life and look at how reuse or recycling helps.
Key words
life‑cycle assessment
A comparison of a product’s impact in all its stages.
LCA
Short for Life‑Cycle Assessment.
reuse
Using something again without changing it.
recycling
Turning old materials into new ones.
Key points
Split a product’s life into four stages: extraction, manufacture, use and disposal.
Find numbers for energy, water, raw material and waste at each stage.
Use decimals, ratios, percentages and correct significant figures to compare two products.
Check that the whole cycle is considered – avoid biased, short‑sighted LCAs.
Watch out for
Recycling metals often requires melting; recycling glass can be done by crushing and re‑melting.
Using a product again (reuse) usually needs less energy than making a new one.
Remember: LCAs involve judgments about pollutant values, so check for possible bias.
Life cycle assessment and recycling Core
You need to understand what a life‑cycle assessment (LCA) looks at, how you compare products and why the reuse and recycling of materials matters.
Key words
life‑cycle assessment
a method that compares a product’s environmental impact across its whole life
Key points
LCAs compare a product’s impact over four stages – extraction/processing, manufacturing/packaging, use and disposal (with transport at each stage).
Quantifiable data in an LCA are energy use, water consumption, raw‑material inputs and waste outputs; pollutant effects need value judgments so the process is partly subjective.
A selective or abbreviated LCA can be designed but must not be used to support a predetermined claim – this is common in advertising.
Students should perform simple comparative LCAs (e.g. plastic vs paper shopping bags) by estimating values, using ratios/fractions/percentages and applying appropriate significant figures.
Interpreting an LCA requires translating between graphical and numeric data, recognising decimals, making estimates and comparing results.
Watch out for
Beware of selective LCAs that are designed to favour a particular claim.
When estimating LCA values use appropriate significant figures; round to one decimal place if the data is rough.
Remember that recycling reduces raw‑material demand, lowers energy consumption and cuts waste – all key environmental benefits.
Remember: Use the diagram in your notes to show how the condenser, pipe P and reactor are connected.
Life cycle assessment and recycling Stretch
For a 70%+ pupil, grasping how LCAs compare environmental impacts and why resource reduction matters is key to tackling higher‑level questions. Focus on the four life stages, quantifiable data, value judgments, bias pitfalls and simple comparative examples such as plastic vs paper shopping bags.
Key words
life cycle assessment
a comparison of a product’s environmental impact across extraction & processing, manufacturing/packaging, use/operation and disposal (plus transport at each stage).
selective LCA
a shortened or biased analysis that can be used to support marketing claims.
recycling
the process of melting/making new goods from recovered materials, reducing demand for raw resources.
Key points
Identify the four life stages and the data types that can be quantified: energy use, water consumption, resource inputs and waste outputs.
Recognise that pollutant effects require value judgments; LCAs are not purely objective.
Beware of selective or abbreviated LCAs – they can mislead if used for advertising.
For simple comparative LCAs (e.g. plastic vs paper bags), collect data on the same stages, then compare energy and resource use directly.
When evaluating resource‑saving strategies, note that reuse cuts raw material demand and energy use, while recycling depends on material type and required product quality.
Watch out for
Never assume a single value for all pollutants – LCAs require careful judgement.
In comparative LCAs keep units consistent; use percentages or ratios to compare impacts clearly.
Remember that waste treatment methods (incineration, landfilling) have different environmental footprints; include them where data are available.
Remember: Link LCA principles to other topics: energy consumption figures appear in the physics section; material waste calculations cross over with chemistry. Mastering these connections gives a strong base for tackling higher‑level questions and marking schemes.
✏️ Try 3 quick questions
Which of the following stages is NOT typically included in a life cycle assessment?
Which of the following best describes Life Cycle Assessment?
A) A method for measuring a product’s energy consumption only during use.
B) A tool that quantifies all environmental impacts from raw material extraction to disposal.
C) A technique used solely by manufacturers to improve product design.
D) A statistical analysis of consumer purchasing behaviour.
During an LCA it was found that manufacturing a plastic shopping bag uses 0.05 kWh of energy and disposing one bag releases 2 g CO₂. For 10 000 bags, calculate the total energy used in manufacturing (in MJ), rounding to 1 decimal place.
There are more on this in 4 Triangles, with hints and worked answers, and real past-paper questions. Carry on there.
Practise it with real exam questions
4 Triangles has quick questions on life cycle assessment and recycling, real GCSE past-paper questions with their mark schemes, and a revision plan that picks what to work on next.
Questions on this topic for a lesson, homework or revision - a quick "do now", misconception questions, small steps that change one thing at a time, and practice, with answers on the last page.