Revision › Purity, formulations and chromatography › Worksheet
Purity, formulations and chromatography Medium
GCSE Chemistry · Chemical Analysis · Name ____________________ Date ________
Builds on: Atoms, elements, compounds and mixtures, The periodic table, Transition metals
Do now
Quick questions on earlier topics - to get your brain going.
A nitrogen atom has a relative atomic mass of 14 and an atomic number of 7. How many neutrons are in one nitrogen atom? [1]
A sodium atom has an atomic number of 11 and a relative atomic mass of 23. How many neutrons are in one sodium atom? [1]
The most reactive halogen that can displace any other from its salt solution is which element? [1]
Elements that tend to form positive ions are called what? [1]
Practice
Which statement best distinguishes a pure substance from an impure mixture using melting point data? [1]
- A pure substance melts at the same temperature in all conditions; an impure sample will not melt.
- A pure substance has a single, sharp melting point; an impurity gives a higher melting point.
- A pure substance has a single, narrow melting point; an impure sample shows a broader range or depressed temperature.
- A pure substance shows a range of temperatures; an impurity has a precise temperature.
Which of the following statements is correct regarding a pure substance? [1]
- All its molecules have identical composition.
- It melts at a single temperature only when heated in vacuum.
- Its boiling point can be lowered by adding another liquid.
- It contains more than one element or compound.
Which of the following is a necessary precaution when performing paper chromatography with organic solvents that are flammable? [1]
- Perform the experiment under water.
- Ensure the work area is well ventilated and keep flame sources away.
- Wear a face mask to protect from vapours.
- Use a metal tray for the solvent.
During paper chromatography two coloured spots, X and Y, move to distances of 2.0 cm and 3.5 cm respectively when the solvent front reaches 7.0 cm. The same experiment is repeated with a different solvent; spot X moves to 1.8 cm while spot Y remains at 3.4 cm. Which spot most likely corresponds to a pure compound? Choose: [1]
- Spot Y
- Spot X
- Neither spot is pure.
- Both spots are pure.
Which of the following is a common misconception about determining purity from melting point? [1]
- A lower melting point indicates higher purity.
- A broad melting range suggests impurities are present.
- A sharp single peak at the expected temperature shows a pure compound.
- The observed melting point must match the literature value for the substance to be pure.
A student places a small droplet of an unknown dye on paper chromatography paper and runs the solvent until the solvent front reaches the top of the paper. The centre of the dye spot is found to be 3.6 cm from the origin, while the solvent front travelled 8.0 cm. Calculate the Rf value of the dye, giving your answer to two decimal places. [1]
Which of the following statements is true for a pure substance? [1]
- It has a range of melting points
- It boils at two different temperatures
- Its boiling point is a single, fixed temperature
- Its density changes with pressure
Which of the following is a more reliable method for determining purity of a substance? [1]
- Observing colour of the sample
- Measuring its melting point and checking against literature values
- Counting the number of spots in a chromatogram
- Recording its taste
A substance that contains only one element or compound and no other components is called what? [1]
What is the abbreviation for the ratio of distance travelled by a compound to that travelled by solvent? [1]
When preparing a paper chromatography experiment, which of the following is a necessary safety precaution? [1]
- Use distilled water as the solvent
- Wear gloves to protect from corrosive solvents
- Keep the chromatography paper in direct sunlight while developing
- Shake the apparatus vigorously before starting
A 45 g sample contains 12 % impurities by mass. Calculate the mass of pure substance present. [1]
Stretch
A step up - try these if you finish.
During chromatography you observe two spots with Rf values 0.45 and 0.78 respectively. Which of the following statements below is a common misunderstanding? Answer: b [1]
- A higher Rf value means the substance has lower affinity for the paper.
- Both spots must belong to the same pure compound.
- The solvent front cannot be used to calculate Rf if it moves unevenly.
- The colour of the spot determines its Rf value.
A student uses paper chromatography to separate pigments extracted from a leaf. Which of the following best describes what will be observed? Answer: b [1]
- Only one spot because all pigments have identical Rf values.
- Multiple coloured spots, each with distinct Rf values.
- The solvent front will dissolve all pigments into a single cloud.
- Pigments will not travel on the paper as they are too large.
A chromatography experiment gives an Rf value of 0.55 for compound Y. If the solvent front travelled 12 cm, how far from the origin did compound Y travel? Give your answer in millimetres to the nearest millimetre. Answer: 66 [2]
Which of the following statements is true regarding melting points of pure substances? Answer: a [1]
- The melting point does not depend on atmospheric pressure.
- Pure substances always melt at a single temperature.
- Mixtures have sharp melting points but pure substances melt over a range.
- A pure substance’s boiling point can be lower than its melting point.
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
When performing the silver nitrate test for halides, why should dilute nitric acid be added to the solution before adding silver nitrate? [1]
- To oxidise chloride ions
- To dissolve any metal hydroxides present
- To reduce Ag⁺ ions to metallic silver
- To keep the solution acidic and prevent Ag₂O precipitation
Which statement correctly compares the hardness of nickel and potassium? [1]
- D) Hardness cannot be compared because they are different metals.
- C) They have the same hardness.
- A) Nickel is harder than potassium.
- B) Potassium is harder than nickel.
A 25.0‑mL aqueous solution contains 0.0200 mol of Ca²⁺ ions. How many millilitres (to one decimal place) of a 1.00 M NaOH solution are required to precipitate all the calcium as Ca(OH)₂? [2]
(Tests for ions and instrumental analysis)Which statement reflects a common misconception about transition metals? [1]
- A) Their compounds can be coloured
- B) Ions of different charges are possible
- D) They conduct electricity when solid
- C) They react quickly with cold water
Which statement about Group 0 elements is true? [1]
- They are highly reactive
- Their boiling points decrease down the group
- They contain more than 20 electrons
- They have a full outer shell except helium
A 0.25 mol L⁻¹ solution of sodium chloride has how many grams of NaCl in each litre? Give the answer to 3 s.f. [1]
(Atoms, elements, compounds and mixtures)
Still going? Unlimited questions on purity, formulations and chromatography, marked as you go: 4triangles.co.uk
💼 Where it leads: Quality control assistant · Water treatment worker · Laboratory technician · Forensic scientist - more
Stuck, or finished? Scan for help on purity, formulations and chromatography - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- 7
- 12
- fluorine
- metals
- C A pure substance has a single, narrow melting point; an impure sample shows a broader range or depressed temperature.
Impurities broaden or lower MP; D reflects this. - A All its molecules have identical composition.
Pure substances have identical molecular composition; thus D is correct. - B Ensure the work area is well ventilated and keep flame sources away.
Flammable solvents need ventilation and no open flames. - A Spot Y
Pure compounds give the same Rf in different solvents; only Y stays nearly constant. - A A lower melting point indicates higher purity.
Lower MP usually means more impurity; so A is misconception. - 0.45
- C Its boiling point is a single, fixed temperature
- B Measuring its melting point and checking against literature values
- Pure substance
- Rf
- B Wear gloves to protect from corrosive solvents
- 39.6
- B Both spots must belong to the same pure compound.
If two different Rf values are observed, they represent two different compounds – not a single pure one. Answer: b - B Multiple coloured spots, each with distinct Rf values.
Different leaf pigments (e.g., chlorophylls, carotenoids) have different affinities for the stationary phase and thus separate into distinct spots. Answer: b - 66
Distance = Rf × distance of solvent front = 0.55 × 12 cm = 6.6 cm = 66 mm. Answer: 66 - B Pure substances always melt at a single temperature.
Pure substances have a fixed, sharp melting point; mixtures melt over a temperature range. Answer: a - D To keep the solution acidic and prevent Ag₂O precipitation
Dilute acid keeps the medium sufficiently acidic so that only halide‑silver precipitates form. - C A) Nickel is harder than potassium.
- 40
Ca²⁺ + 2 OH⁻ → Ca(OH)₂(s) moles OH⁻ needed = 0.0200×2=0.0400 mol volume NaOH = 0.0400 mol ÷ 1.00 M = 0.0400 L = 40.0 mL - D C) They react quickly with cold water
- D They have a full outer shell except helium
- 14.6
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on purity, formulations and chromatography - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk