Revision › Resources and potable water › Worksheet

Resources and potable water Hard

GCSE Chemistry · Using Resources · Name ____________________ Date ________

Builds on: Reactivity, extraction, oxidation and reduction

Do now

Quick questions on earlier topics - to get your brain going.

  1. Which element is commonly added to metal oxides to extract the metal by reduction? [1]

  2. What term describes a reaction where oxygen is lost? [1]

Practice

  1. Which statement best explains why reverse osmosis requires more energy than simple distillation when treating seawater? A) Reverse osmosis uses high‑pressure pumps that consume electricity. B) Distillation can be performed using solar heat, whereas reverse osmosis cannot. C) Reverse osmosis concentrates salts on the feed side, while distillation removes them completely. D) Distillation must be carried out in a vacuum, increasing energy use. [1]

    1. B
    2. D
    3. A
    4. C
  2. Which of the following is essential when preparing a fresh water sample for an accurate pH measurement in a laboratory? A) Use a glass pipette and avoid touching the electrode with hands. B) Rinse the electrode with distilled water before each use. C) Store the sample in a plastic bottle for at least 24 h before testing. D) Add a small amount of acid to neutralise any carbonate ions. [1]

    1. D
    2. B
    3. A
    4. C
  3. What statement below reflects a common misconception about potable water and pure water? A. Potable water must be free of all dissolved solids. B. Pure water is the same as potable water. C. Potable water can contain dissolved salts but in low concentrations. D. Both potable and pure water are completely clean. (Tick one box.) [1]

    1. D. Both potable and pure water are completely clean.
    2. C. Potable water can contain dissolved salts but in low concentrations.
    3. B. Pure water is the same as potable water.
    4. A. Potable water must be free of all dissolved solids.
  4. A water treatment plant requires that the free‑chlorine concentration in potable tap water be less than 0.5 mg L⁻¹. A household uses 50 L of tap water per day and the chlorine level is measured at 0.4 mg L⁻¹. What total amount of free‑chlorine, in milligrams, does the household receive each day? (Give your answer to the nearest whole number). [2]

  5. Which of the following best defines 'potable water'? [1]

    1. Water with a pH between 6.5 and 8.5 regardless of contaminants.
    2. Water safe to drink and free from harmful microorganisms.
    3. Water that contains no dissolved solids at all.
    4. Any freshwater source suitable for irrigation.
  6. In a laboratory experiment to purify water samples, which of the following measures is essential to prevent cross‑contamination? A. Use only disposable plastic pipettes. B. Wear gloves and a lab coat. C. Keep all reagents in sealed containers. D. Mix all samples together before testing. [1]

    1. Use only disposable plastic pipettes.
    2. Mix all samples together before testing.
    3. Wear gloves and a lab coat.
    4. Keep all reagents in sealed containers.
  7. A desalination plant produces 2000 L of potable water per day from sea water with an average salinity of 3.5 %. Assume the density of sea water is 1000 kg m⁻³. Calculate the mass of salt removed each day, to the nearest kilogram. [1]

  8. How many cubic metres of water does a family of 5 consume in one week if the average daily consumption is 180 L per person? [2]

  9. A reverse osmosis plant draws sea water at \(55\text{ bar}\) to produce potable water. If the feed volume is 1000 L per day and system efficiency is 50 %, calculate the minimum amount of electrical work (in kWh) required per day, given that \(1\,\text{kWh}\) supplies \(3.6\times10^{6}\,\text{J}\). Use \(W=P V\) with pressure in Pa and volume in m³. [2]

  10. When treating greywater for reuse in a household, which of the following is the most appropriate first step? A) Add chlorine disinfectant directly to the water. B) Pass the water through a sand filter. C) Adjust the pH to 7.0 using lime. D) Boil the water for 5 minutes. [1]

    1. C
    2. A
    3. B
    4. D
  11. Which statement best describes how the treatment of groundwater differs from the treatment of seawater? A) Groundwater requires desalination, whereas seawater is filtered. B) Seawater needs to be boiled before use, while groundwater can be consumed directly. C) Groundwater generally undergoes sedimentation and disinfection; seawater must first have its salt removed by a membrane or distillation process. D) Both groundwater and seawater are treated in the same way because they are both freshwater sources. [1]

    1. D
    2. C
    3. B
    4. A

Exam practice

Real past-paper questions on resources and potable water, with their mark schemes, are in 4 Triangles - free to practise.

Mixed practice

Questions on topics this one links to - mixing them helps you remember both.

  1. Which metal is more reactive at room temperature, magnesium or iron? (Tick one box.) [1]

    1. ☐ Iron
    2. ☐ Both are non‑reactive
    3. ☐ They have the same reactivity
    4. ☐ Magnesium
    (Reactivity, extraction, oxidation and reduction)
  2. During an LCA it was found that manufacturing a plastic shopping bag uses 0.05 kWh of energy and disposing one bag releases 2 g CO₂. For 10 000 bags, calculate the total energy used in manufacturing (in MJ), rounding to 1 decimal place. [2]

    (Life cycle assessment and recycling)
  3. Which of the following disposal methods typically results in higher CO₂ emissions per kg of plastic waste? [1]

    1. A) Landfilling
    2. B) Incineration with energy recovery
    3. C) Mechanical recycling
    4. D) Chemical recycling
    (Life cycle assessment and recycling)
  4. Which of the following best defines an electrolyte? [1]

    1. An inert electrode used in electrolysis.
    2. A substance that conducts electricity when solid.
    3. A metal that is oxidised to give electrons.
    4. A solution or molten substance containing ions that can move freely.
    (Electrolysis)
  5. When a molten ionic compound is electrolysed using inert electrodes, which of the following will be produced at the anode? [1]

    1. Water is reduced to hydrogen gas.
    2. The metal ion is reduced to metal.
    3. A non‑metal ion is oxidised to its elemental form.
    4. Hydrogen ions are oxidised to oxygen gas.
    (Electrolysis)

💼 Where it leads: Recycling operative · Water network operative · Recycling officer · Climate scientist - more

Stuck, or finished? Scan for help on resources and potable water - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk

Answers

  1. carbon
  2. reduction
  3. C A
  4. B B
  5. C B. Pure water is the same as potable water.
    The specification requires students to distinguish between *potable* and *pure* water. The most frequent misunderstanding is that these two terms refer to the same thing, i.e. that pure water is itself potable. Therefore option **B** is the statement that reflects this common misconception. …
  6. 20
    \(0.4\,\text{mg L}^{-1}\times 50\,\text{L}=20\,\text{mg}\)
  7. B Water safe to drink and free from harmful microorganisms.
  8. A Use only disposable plastic pipettes.
    The question is asking for a measure that directly stops the transfer of material from one sample to another – i.e., it must prevent **carry‑over between samples**. * Using disposable plastic pipettes guarantees that each sample is transferred with a brand‑new tip; no tip can be reused and therefore nothing can be carried over. …
  9. 70
    First convert 2000 L to cubic metres: 2000 L = 2.0 m³. Mass of seawater = volume × density = 2.0 m³ × 1000 kg m⁻³ = 2000 kg. Salt mass = 3.5 % of 2000 kg = 0.035 × 2000 kg = 70 kg. Rounded to the nearest kilogram, answer is 70 kg.
  10. 6.3
  11. 3.1
  12. C B
    Greywater typically contains suspended solids and organic matter; a sand filter removes these before further treatment, so option B is correct. No other option is a standard first step in greywater treatment. The answer should be given as the letter of the correct option.
  13. B C
    Groundwater is already fresh but may contain microbes, so it typically requires sedimentation (or filtration) followed by disinfection. Seawater contains high concentrations of salt, which must first be removed by desalination (membrane or distillation) before any further treatment. Option C correctly contrasts the two.
  14. D ☐ Magnesium
  15. 1800
  16. B B) Incineration with energy recovery
    Incineration releases CO₂ directly
  17. D A solution or molten substance containing ions that can move freely.
  18. C A non‑metal ion is oxidised to its elemental form.

Some key word definitions from Oak National Academy (Open Government Licence).

Stuck, or finished? Scan for help on resources and potable water - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk