Revision › Transition metals › Worksheet
Transition metals Medium
GCSE Chemistry · Atomic Structure & the Periodic Table · Name ____________________ Date ________
Builds on: The periodic table
Do now
Quick questions on earlier topics - to get your brain going.
The most reactive halogen that can displace any other from its salt solution is which element? [1]
Elements that tend to form positive ions are called what? [1]
Which is right?
Choose the right answer - then say what mistake each wrong one makes.
A student dissolves a small piece of an unknown metal in dilute nitric acid, obtaining a violet solution. He then adds a few drops of sodium hydroxide, which turns the mixture blackish‑green and insoluble. Which explanation best accounts for these observations?
- The metal is nickel; Ni²⁺ gives a blue solution that turns green on addition of NaOH
- The metal is iron; Fe³⁺ gives a purple solution and the hydroxide dissolves in more NaOH
- The observations are impossible; transition metals cannot give coloured solutions
- The metal is chromium; Cr³⁺ gives a violet complex while Cr(OH)₃ is green‑black
Which of the following is a property that is typical of a transition metal compared with an alkali‑metal?
- Forms only +1 ions
- High density
- Reacts readily with water
- Low melting point
An unknown metal X is dissolved in dilute nitric acid producing a violet solution. The student then adds hydrogen peroxide (H₂O₂) and the solution turns green. Which sequence below best explains this observation?
- The colour change is due to a temperature rise during the reaction, not redox chemistry
- 2 only – X was iron(II); oxidation produced Fe³⁺, giving green in water
- 3 only – X was nickel; its violet colour changes to green when oxidised by H₂O₂
- 1 only – X was chromium(III); oxidation by H₂O₂ gave chromium(VI), which is green
Practice
Which statement correctly compares the hardness of nickel and potassium? [1]
- D) Hardness cannot be compared because they are different metals.
- C) They have the same hardness.
- A) Nickel is harder than potassium.
- B) Potassium is harder than nickel.
Which statement reflects a common misconception about transition metals? [1]
- A) Their compounds can be coloured
- B) Ions of different charges are possible
- D) They conduct electricity when solid
- C) They react quickly with cold water
Which of the following is a typical property that distinguishes transition metals from Group 1 elements? [1]
- D) They dissolve readily in cold water
- C) They react more slowly with oxygen at room temperature
- B) They are less dense than alkali metals
- A) They have lower melting points
The melting point of iron is \(1538\,^\circ\text{C}\). Convert this value to Kelvin (K). Give your answer as a whole number. [1]
When cobalt metal is left at room temperature in air, which of the following best describes its reaction with oxygen? [1]
- B) It reacts slowly forming CoO
- C) No reaction occurs
- D) Oxide forms only when heated above 500 °C
- A) It reacts rapidly forming CoO
If a sample of manganese has a mass of 7.2 g and occupies a volume of 1.0 cm³, what is its density? Give your answer in kg m⁻³ rounded to the nearest integer. [1]
Which comparison is correct about reactivity with oxygen at room temperature? A) Transition metals are more reactive than Group 1 elements B) Both react at the same rate C) Transition metals are less reactive than Group 1 elements D) Only transition metals react [1]
- B)
- D)
- A)
- C)
Which characteristic of transition metals tends to be greater than that of Group 1, giving them a heavier feel per unit volume? [1]
Which statement best describes a typical property of transition metals compared with Group 1 elements? A) They have lower melting points B) They have higher densities C) They dissolve readily in water D) They conduct electricity poorly [1]
- B)
- C)
- A)
- D)
Which statement best defines a transition metal? A) A metal with only s‑electrons B) A metal whose d sub‑shells are fully filled in all states C) A metal that can give multiple oxidation states D) A non‑metal [1]
- C)
- B)
- A)
- D)
Rhodium is a transition metal. Compared with sodium (Group 1), what property would you expect rhodium to have? A) Lower melting point B) Higher density C) Less reactive with water D) Both B and C [1]
- A)
- B)
- D)
- C)
Which physical property of transition metals is higher than that of Group 1 elements? [1]
Stretch
A step up - try these if you finish.
Sodium melts at 98 °C and chromium at 1908 °C. Find the difference in their melting points in kelvin. [2]
When reacting sodium metal with cold water in a laboratory demonstration, which of the following precautions is essential? A) Perform the experiment inside a sealed plastic bag B) Keep a fire extinguisher (Class D) within 1 m C) Wear heat‑resistant gloves D) Store sodium in an airtight container before use [2]
- B
- D
- A
- C
The melting point of iron is 1538 °C and that of potassium is 63.5 °C. What is the difference between their melting points expressed in kelvin? (Round to the nearest whole number) [1]
An alloy is made from 70 % chromium and 30 % titanium. Which property will it most likely exhibit when exposed to cold water at room temperature? [1]
- C) moderate reaction
- B) no reaction
- A) vigorous reaction
- D) formation of metallic hydrogen
Mixed practice
Questions on topics this one links to - mixing them helps you remember both.
Which statement about Group 0 elements is true? [1]
- They are highly reactive
- Their boiling points decrease down the group
- They contain more than 20 electrons
- They have a full outer shell except helium
Which statement best distinguishes a pure substance from an impure mixture using melting point data? [1]
- A pure substance melts at the same temperature in all conditions; an impure sample will not melt.
- A pure substance has a single, sharp melting point; an impurity gives a higher melting point.
- A pure substance has a single, narrow melting point; an impure sample shows a broader range or depressed temperature.
- A pure substance shows a range of temperatures; an impurity has a precise temperature.
Which of the following statements is correct regarding a pure substance? [1]
- All its molecules have identical composition.
- It melts at a single temperature only when heated in vacuum.
- Its boiling point can be lowered by adding another liquid.
- It contains more than one element or compound.
What is the number of valence electrons in an atom of oxygen (atomic number 8)? [1]
(The periodic table)Which of the following statements correctly compares the tests for hydrogen and oxygen? [1]
- ␣A) Both tests use a burning splint that gives a pop sound
- ␣D) The hydrogen test uses a burning splint giving a pop, while the oxygen test uses a glowing splint that relights
- ␣B) The hydrogen test requires a glowing splint to relight
- ␣C) The oxygen test uses a burning splint that gives a pop sound
When testing for hydrogen, which of the following would NOT be a correct observation? [1]
- ␣C) The splint continues to burn after the reaction
- ␣B) The gas immediately disappears when lit
- ␣D) There is no fire but a sharp popping noise
- ␣A) A burning splint gives a pop sound
Still going? Unlimited questions on transition metals, marked as you go: 4triangles.co.uk
💼 Where it leads: Welder · Quality control assistant · Materials technician · Laboratory technician - more
Stuck, or finished? Scan for help on transition metals - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk
Answers
- fluorine
- metals
- D The metal is chromium; Cr³⁺ gives a violet complex while Cr(OH)₃ is green‑black
The key step is recognising that a violet aqueous solution points to Cr³⁺, and that adding NaOH produces the green‑black hydroxide precipitate. Students must link colour with oxidation state and then base‑hydroxide reactivity. A: Nickel salts are violet and change to green with base B: Fe³⁺ always appears purple and its hydroxide remains soluble C: Transition metals never produce colours - B High density
Use simple comparisons: give students a picture of Na (low melting point, low density) vs Fe (high melting point and high density). Let them see that transition metals also react slowly with water, and emphasise the variety of oxidation states via small reactions or coloured salts. This concrete evidence helps them separate the two groups. … - D 1 only – X was chromium(III); oxidation by H₂O₂ gave chromium(VI), which is green
Step 1: recognise the violet colour as typical of Cr³⁺. Step 2: remember that H₂O₂ can raise its oxidation state to +6, producing chromate or dichromate ions which are green in solution. The other options mix up colours and oxidation states. … - C A) Nickel is harder than potassium.
- D C) They react quickly with cold water
- B C) They react more slowly with oxygen at room temperature
- 1811
- A B) It reacts slowly forming CoO
- 7200
- D C)
- Density.
- A B)
- A C)
- C D)
- Melting point.
- 1810
- A B
- 1475
- B B) no reaction
- D They have a full outer shell except helium
- C A pure substance has a single, narrow melting point; an impure sample shows a broader range or depressed temperature.
Impurities broaden or lower MP; D reflects this. - A All its molecules have identical composition.
Pure substances have identical molecular composition; thus D is correct. - 6
- B ␣D) The hydrogen test uses a burning splint giving a pop, while the oxygen test uses a glowing splint that relights
- A ␣C) The splint continues to burn after the reaction
Some key word definitions from Oak National Academy (Open Government Licence).
Stuck, or finished? Scan for help on transition metals - an explanation, hints and unlimited practice that marks itself.
Free at 4triangles.co.uk