Learn what matters when metals, alloys and composites are used.
Key words
Corrosion
Destruction of metal by chemical reaction with air or water.
Coating
Layer that protects metal from oxygen or moisture.
Sacrificial protection
Using a more reactive metal to shield another.
Alloy
Mixture of two or more metals.
Key points
Corrosion is metal damage by oxygen and water.
Coatings such as paint or zinc stop this reaction.
An alloy mixes two metals to change strength or colour.
Composites join a matrix with fibres for light, strong material.
Watch out for
Remember: iron rusts only if both air and water are present.
Zinc on iron (galvanising) gives sacrificial protection.
Bronze is copper + tin; brass is copper + zinc.
Remember: Choose materials that match required strength, weight and resistance.
Using materials Core
The GCSE specification asks pupils to understand how corrosion, alloys and other materials are made, why they behave as they do, and when they are used.
Key words
corrosion
chemical attack by oxygen/water
sacrificial protection
using a more reactive metal to shield another
alloy
mixture of metals with improved properties
polymer
large molecules built from monomers
Key points
Corrosion needs oxygen and water; coatings block the reaction.
Sacrificial protection uses a more reactive metal, e.g. zinc on iron, which oxidises first.
Alloys combine metals to give strength, hardness or corrosion resistance: bronze (Cu+Sn), brass (Cu+Zn), stainless steel (Fe+C+Cr+Ni).
Steel hardness depends on carbon: high‑carbon is hard but brittle; low‑carbon is softer and easier to shape.
Aluminium alloys are light yet strong, useful where weight matters.
Glass types differ in composition: soda‑lime (sand+Na₂CO₃+CaCO₃) melts ~700 °C; borosilicate adds B₂O₃ for higher heat resistance.
Watch out for
Remember the two key properties of steel that change with carbon content: hardness and brittleness.
Remember: Corrosion needs both air and water; coatings protect by creating a barrier.
Using materials Stretch
This short note summarises the key points you need to know for GCSE Chemistry on how different materials are chosen and used in everyday products.
Key words
corrosion
destruction of a metal by chemical reactions with oxygen, water or other agents
alloy
a mixture of two or more metals (or a metal with another element) to give new properties
thermosetting polymer
molecule that hardens permanently after heating and does not melt again
composite
two‑component material where fibres are embedded in a matrix
Key points
Corrosion needs both oxygen and water; coatings block contact with the metal.
Sacrificial protection uses a more reactive metal (e.g. zinc on iron) that oxidises first, shielding the base metal.
Alloys combine metals for improved strength, corrosion resistance or lighter weight.
High‑carbon steel is hard but brittle; low‑carbon steel is softer and easier to shape.
Stainless steel adds chromium/nickel for hardness and resistance to corrosion.
Aluminium naturally forms an oxide skin that protects it from further corrosion.
Which condition is essential for rusting to occur on iron?
A stainless steel bolt has a mass of 150 g and density of 7.8 g cm⁻³.
What is its volume in cubic centimetres?
(Answer to the nearest 0.01 cm³)
Which of the following statements correctly compares ceramic and polymer materials regarding heat resistance?
There are more on this in 4 Triangles, with hints and worked answers, and real past-paper questions. Carry on there.
Practise it with real exam questions
4 Triangles has quick questions on using materials, real GCSE past-paper questions with their mark schemes, and a revision plan that picks what to work on next.
Questions on this topic for a lesson, homework or revision - a quick "do now", misconception questions, small steps that change one thing at a time, and practice, with answers on the last page.